[Case Study] High-pressure cleaning of the bottom of an artificial shallow pond in the garden of a certain company facility in Tokyo.

Significantly faster than conventional high-pressure washing! For cleaning the bottom of a pond close to 1,000m2, the work can be completed in 4 days.

We received a request regarding a man-made pond approximately 20 cm deep that has become murky due to the inflow of dead leaves and the growth of moss and algae. Since it is impossible to clean while there is still water in the pond, we drained all the water, removed the dead leaves and algae, and then proceeded with the cleaning. To clean after draining, we needed a system that allows for simultaneous wastewater collection during the cleaning process, so we introduced our "HOTJEBLO Fujiyama R2." We were able to demonstrate that the simultaneous suction method is effective for cleaning, as the moss removed during the cleaning tends to reattach. 【Case Summary】 ■ Equipment Used: HOTJEBLO Fujiyama R2 ■ Issues: - The pond becomes murky due to the inflow of dead leaves and the growth of moss and algae in a man-made pond approximately 20 cm deep. - A system that allows for simultaneous wastewater collection during cleaning is necessary for continued work after draining. *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

Overwhelming reduction in work time! By eliminating wastewater discharge and enabling simultaneous cleaning and wastewater collection, it is possible to centralize the process.

We have verified how the "Hot Jeblo Method" is superior to conventional high-pressure washing. Conventional high-pressure washing requires protective measures against splatter and post-treatment of wastewater, but with the "Hot Jeblo Method," there is no wastewater runoff, allowing for the integration of washing and simultaneous wastewater collection. The advantage of simultaneous washing and wastewater collection is a significant reduction in work time. We have a verification video, so please take a look. 【What is the HOTJEBLO Cleaning System?】 ■ HOT (hot water device) + JET (high-pressure pump) + BLOWER (vacuum) ■ Integration of high-pressure washer, hot water device, and vacuum ■ Simultaneous processing of washing, rinsing, and wastewater treatment in three steps ■ Significant reduction in work time and labor *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!