Please take a look at Fukuda's digital pressure gauge!

It was developed as a digital pressure gauge, but its multifunctionality allows for a variety of applications!

The "MI-170 series" is a versatile and high-functionality multi-indicator. In addition to upper and lower limit setting devices, it allows for eight types of condition settings according to application, such as scaling and digital filters, which can be easily switched by external signals. It is also effective in production lines with a variety of small quantities, where settings are frequently changed, or when performing multiple types of measurements in one location. 【Features】 ■ Equipped with an additional sensor input besides the built-in sensor, displayed as SUB ■ Holds the peak value within the measured range ■ Peak (maximum value) and bottom (minimum value) can be selected through function settings ■ Capable of eight types of condition settings according to applications, including upper and lower limit setting devices, scaling, and digital filters ■ Two sets of upper and lower limit setting devices (four settings) can be installed, allowing for switching between two settings and four settings *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Other measurement, recording and measuring instruments
• Leak Testing Equipment

Improving "reliability" with a simple component structure and achieving "low cost"! Suitable for a wide range of applications!

The "DG-960 series" is a pressure gauge equipped with a highly reliable pressure sensor developed in-house (either built-in or external). It comes standard with contact output signals linked to upper and lower limit settings and BCD (parallel) output. The core of the measurement, the pressure sensor, can be equipped with either a diaphragm-type differential pressure sensor or a semiconductor-type differential pressure/gauge pressure sensor developed in-house, allowing for selection based on application needs. 【Features】 ■ Mounting dimensions are designed according to DIN96 standards ■ Accuracy is ±0.15% to ±0.5% of full scale (depending on the sensor used) ■ Sampling speed is 10 times per second ■ Various functions such as upper and lower limit settings, hold function, and auto-zero function are included *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Other measurement, recording and measuring instruments
• Leak Testing Equipment

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Features: ● Equipped with Intel Core i3-N305 / Processor N97 ● DDR5 4800MHz SO-DIMM x1 slot (up to 16GB) (sold separately) ● LVDS Dual Channel 18/24 bit x1, VGA x1, HDMI x1 ● Intel 2.5GbE x2, SATA 6Gb/s x1, 8bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● Full size mPCIe/mSATA ● M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heatsink included * Memory, storage, and OS sold separately

Features: ● Equipped with Intel Core Ultra 5 225H/7 255H (Arrow Lake) ● DDR5 6400MHz dual-channel SODIMM x 2 (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-key x 1, M.2 3052 B-key x 1, M.2 2230 E-key x 1 ● Supports DC input of 9 to 36V ● Fan-equipped heat sink available separately GENE-MTH6-FAN: Heat sink with fan GENE-MTH6-HSP: Heat spreader (requires heat dissipation in the enclosure) * This model does not include OS/memory/storage.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.