Please take a look at Fukuda's flow meters! (Flow Tester, Flow Unit, Laminar Flow Meter)

The all-in-one flow tester "FMZ-1063" has significantly improved operability, visibility, and measurement accuracy compared to conventional flow meters.

The "FMZ-1063 series" achieves a measurement accuracy of ±3.5% of R.D. ±1 digit, resulting in approximately a 60% improvement in accuracy compared to conventional products (in the 20-80% range relative to F.S.). The SCAN function, which shortens measurement time and includes correction features, has been inherited, allowing for reduced measurement time while minimizing variability in measurement results. It features a large 5.6-inch LCD screen, enhancing visibility and operability. 【Features】 ■ All-in-one flow tester utilizing a high-precision mass flow meter ■ Calibration port on the front panel improves operability for sensitivity calibration ■ The well-established correction function SCAN has been inherited ■ The display uses a 5.6-inch color LCD, providing over twice the visibility of previous models ■ Various data output options available *For more details, please feel free to contact us.

• Flow Meter
• Other measurement, recording and measuring instruments
• Leak Testing Equipment

A compact flow meter. This affordable version is perfect for easy flow measurement!

The "FU Series" is a compact flow measurement device that integrates laminar flow elements and differential pressure sensors into a manifold base as a single flow unit. Since the differential pressure sensor is pre-integrated, it features a highly convenient design that only requires connection to the laminar flow element for piping. You can easily measure flow by simply connecting the output wiring from the differential pressure sensor to a display unit (sold separately). 【Features】 ■ Cost-effective due to integrated structure ■ Easy flow measurement ■ Easy to integrate into devices with a separate display type ■ Piping system can be utilized with minimal configuration ■ Flow display and flow determination can be achieved by connecting to a display indicator (model: MI-170 / MIZ-0175) *For more details, please refer to the PDF materials or feel free to contact us.

• Flow Meter
• Other measurement, recording and measuring instruments
• Leak Testing Equipment

High precision with excellent linearity and good responsiveness. A laminar flow meter with low pressure loss and excellent reproducibility.

A wide range of flow measurements from 2 NmL/min to 500 NL/min is possible. 【 Fukuda's Laminar Flow Meter 】 The laminar element has a structure that bundles capillaries at the cross-section of the flow path. When the flow inside the conduit of the laminar element is laminar, the pressure loss of the laminar is proportional to the flow rate. By measuring this differential pressure, highly accurate flow measurements can be obtained.

• Flow Meter
• Other measurement, recording and measuring instruments
• Leak Testing Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/