Please take a look at Fukuda's sealed product air leak testing device!

New standards for waterproof testing. A non-destructive dry leak test device that does not get wet. Capable of testing equivalent to IPX7 and IPX8.

This is an air leak testing device that quantifies and assesses the sealing performance, waterproofness, and airtightness of sealed products based on pressure changes. ● Features - Dry non-destructive testing that does not wet the product - Quantifies leakage amounts for scientific quality control - Capable of air leaks equivalent to waterproof standards IPX7 and IPX8 - The allowable size for tested products is up to W 300 × D 210 × H 100 mm ● Target Products Automotive parts: In-vehicle cameras, smart keys, ECUs, LED lights Electronic components: Small motors, waterproof connectors, relays, sensors Pharmaceuticals and food: Packaging containers, electronic devices like smartphones, wearable devices and other sealed structural products in general ● Main Specifications Test pressure range: 1 to 200 kPa abs External dimensions: W 470 × D 720 × H 416 mm Weight: 50 kg Number of channels: 100 ch Please contact us for more details.

• Sealing
• Leak Testing Equipment
• Defect Inspection Equipment

Dry non-destructive testing that does not get wet. Since it is a tabletop machine consolidated into one unit, there is no need to create jigs.

The "MSZ series" is an air leak testing device that verifies the sealing and waterproofing of sealed products. Three models are available to accommodate the size of the products being tested. It can be used for a variety of products, including packaging equipment and electronic devices. 【Features】 ■ Quantification of leakage amount ■ Quantitative and reproducible measurement results ■ Testing of airtightness and waterproofing of sealed products (e.g., equivalent to waterproof standards IPX7, IPX8) <Examples of items to be tested> ● Automotive parts ● Electronic devices ● Electronic components ● Packaging containers (food, cosmetics) and various packaging containers *Please refer to the "Applications and Achievements" section below. 【Measurement Precautions】 - A space (air) of at least 1 mL is required within the item being tested. - The information provided is an example; please consult us regarding the feasibility of measurement. *For more details, please refer to the PDF document or feel free to contact us.

• Sealing
• Leak Testing Equipment
• Defect Inspection Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA