The ink stripping cleaning machine was featured in the January issue of Convertec magazine.

We will peel off and clean the coating layer, such as ink coated on the film! This was developed for film recycling and contributes to the SDGs!

We have developed a device for peeling and cleaning ink and coated layers printed on film. By peeling and cleaning inks, etc., from the film (plastic), we contribute to the reuse of the film. *We have a peeling and cleaning testing machine installed in our company, so peeling tests can be conducted at any time. 【Flow of Plastic Reuse】 (1) Peeling and cleaning printed film rolled up in a roll using this device. (2) Pelletizing the cleaned film for reuse (recycling) or reusing it as is (reuse). 【Flow of Coating Layer Reuse】 (1) Peeling and cleaning printed film rolled up in a roll using this device. (2) Collecting the cleaning liquid mixed with the peeled layer and recovering the coating layer through filter filtration. 【Cleaning Process】 Unrolling ⇒ Immersion (cleaning aid) ⇒ Peeling ⇒ Cleaning (water) ⇒ Drying ⇒ Rolling 【Features】 ■ Peeling can be done with minimal scratches due to the peeling roll (patented). ⇒ The film can be reused without repelting after peeling, and it can also accommodate delicate substrates that are prone to breaking. ■ A circulation system is established in the tank, contributing to the reduction of running (disposal) costs for cleaning aids. ■ Compatible with single-sided printing, double-sided printing, and both types of printed films.

• Other processing machines
• Other cleaning machines

Easy implementation of delamination verification for substrate surface layers! Delamination rolls are available in various materials and can be selected according to the application!

We have newly developed and manufactured a "Simple Peeling Verification Machine." The peeling rolls can be selected from various types, ranging from those that are less likely to scratch the substrate to those that provide strong polishing. The drive can be selected between motor-driven (automatic) and handle-operated (manual). Please consider using it for a wide range of applications, such as the removal of stubborn foreign substances on the substrate surface, polishing treatment of the substrate surface, and cleaning the substrate with chemical solutions. 【Features】 ■ Uniform peeling of the substrate surface using peeling rolls ⇒ Patent obtained ■ Peeling rolls are available in various materials and can be selected according to the application ■ Drive can be selected between motor-driven (automatic) and handle-operated (manual) ⇒ With handle operation, it is also possible to immerse in organic solvents (explosive hazardous materials) ■ Contribution to SDGs ■ Testable ⇒ The power supply is compatible with 100V, and the testing machine is equipped with wheels, allowing it to be used in various locations (rental options are also available).

• Other measurement, recording and measuring instruments

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Dear Sir/Madam, I would like to express my congratulations on the continued prosperity of your company. Thank you very much for your exceptional support. We would like to inform you that our company will be closed for winter holidays during the following period. We apologize for any inconvenience this may cause and kindly ask for your understanding. 1. Winter Holiday Period From Thursday, December 28, 2023, to Thursday, January 4, 2024. 2. Business Operations After the Winter Holiday Period We will resume normal operations from Friday, January 5, 2024.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.