Introducing a case study of a picking cart in an automobile engine manufacturing factory!!

Inclined transport and speed control are now possible! The high-performance electric assist unit caster E-Drive Optima has been newly introduced.

E-Drive is a high-assist performance electric assist unit caster that can support a maximum total weight of 500 kg. Introducing the new series, E-Drive Optima. While maintaining ease of use, it now also supports inclined transport and speed control. Even for manual handling of heavy loads with high weight, this product allows for easy operation with hand controls, reducing the burden on operators and improving efficiency. 【Features】 ■ Reduces operator burden and improves efficiency ■ High assist performance ■ Supports a maximum total weight of 500 kg (per unit) ■ Capable of inclined transport ■ Speed control available ■ Settings can be adjusted according to the usage environment

• caster

Maximum support total weight of 1,000 kg! It can be attached to existing carts and is easy to operate with just a thumb.

The "e-drive" is an electric assist unit that can be attached to existing carts and is easy to operate with just a thumb. Even for pushing heavy loads on carts, this product allows for easy operation with hand controls. It can support a maximum total weight of 500 kg and features two modes: initial and continuous assist. Settings can be adjusted according to the usage environment. 【Features】 ■ Reduces work burden and improves efficiency ■ High assist performance ■ Can be retrofitted to your existing cart ■ Achieves cost-effective assistance *For more details, please refer to the PDF document or feel free to contact us.

• Trolley
• Other conveying machines
• Power tools

Achieve process optimization, cost reduction, and productivity improvement simultaneously! Introducing case studies.

We would like to introduce a case study of Esselte Leitz, a manufacturer of office supplies that has adopted our electric assist unit, 'E-drive'. The company offers a 24-hour same-day shipping service, and improving the labor environment by reducing the burden on workers who repeatedly perform stop-and-go tasks with picking carts weighing up to 400 kg, as well as enhancing the efficiency of product collection, was a priority. In response, we proposed a solution to reduce transportation burdens and improve transportation efficiency using our product. By installing it on 27 carts, the load on employees transporting carts was significantly reduced, achieving process optimization, cost reduction, and increased productivity simultaneously. 【Effects】 ■ Ability to transport large quantities of products at once, and very easily ■ Improved work productivity ■ Walking distance reduced by up to 80% ■ Significant reduction in the load on employees transporting carts ■ Annual cost savings of over 60 million yen *For more details, please refer to the PDF document or feel free to contact us.

• wheel
• caster

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "24 Tissue Tubes 3.0ml Type" features a wide inner diameter of 13.4mm at the mouth, a low height of 25.9mm, and a flat bottom design, making it easy to insert and remove samples. Each tube is equipped with a 2D code on the bottom, allowing for efficient sample information management by using a 2D scanner to reflect the code in a PC database. Additionally, it is compatible with automated systems due to its SBS format. 【Features】 ■ Easy insertion and removal of samples ■ Particularly suitable for tissue/cell samples measuring 5mm to 7mm ■ Using our dedicated rack for 24 tubes allows for bulk reading of the 2D codes on the tube bottoms ■ Compatible with automated systems due to its SBS format ■ Made of polypropylene, autoclavable, and compatible with DMSO *For more details, please refer to the related links or feel free to contact us.

■Disadvantages of Conventional Antistatic Fluororesin Coatings - Requires high-temperature firing (around 400°C) - Applicable only to metals - Limited color options - Low mechanical strength ■Features of Safron LF+ - Can be processed at low temperatures (below 100°C) - Applicable to metals and resins - Color variations available - High friction coefficient and mechanical strength - Antistatic performance is equivalent to conventional Safron For more details, please check the product site.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.