After using the fuel saver, complete combustion of heavy oil is maintained, and carbon residue is reduced by about 80%! The combustion efficiency of the boiler has increased in comparison.

It is possible to save 21.9% on gasoline fuel consumption. The viscosity of heavy oil can be reduced to 1/10. A fuel-saving device for small trucks and cars.

The fuel-saving device "iSaver GT-01" is designed for fuel tanks of 100 liters, suitable for pickup trucks, sedans, SUVs, and more. It is effective with both diesel and heavy oil, successfully lowering the viscosity of heavy oil from 180 cSt to 18 cSt in experiments. Tests conducted by the Hong Kong Electrical and Mechanical Services Department revealed that gasoline fuel consumption can be reduced by 21.9%. NMR testing has demonstrated a 20% increase in oil molecule density, achieving groundbreaking effects that other products cannot match. Certified by TÜV Rheinland Taiwan. For more details, please download the catalog or contact us.

• Other energy equipment

Can reduce heavy oil viscosity by one-tenth. Effective for diesel oil as well. A groundbreaking fuel-saving device aimed at large trucks, generators, and more.

The fuel-saving device "iSaver GT-02" is designed for fuel tanks of 400 liters, such as those found in trailers, bulldozers, tractors, and generators. It is effective with both diesel oil and heavy oil, and experiments have successfully reduced the viscosity of heavy oil from 180 cSt to 18 cSt. Certification by NMR has proven a 20% increase in oil molecules, demonstrating groundbreaking effects that surpass those of competing products. Certified by TÜV Rheinland Taiwan. For more details, please download the catalog or contact us.

• Other energy equipment

Can reduce heavy oil viscosity by one-tenth. Effective for diesel oil as well. Fuel-saving device for ships and boilers.

The fuel-saving device "iSaver GT-03" is designed for container ships, fishing boats, tankers, cruisers, speedboats, and boilers. It works effectively with both diesel oil and heavy oil, and we have successfully conducted experiments that reduced the viscosity of heavy oil from 180 cSt to 18 cSt. NMR testing has proven that oil molecules increase by 20% HZ/CM, demonstrating groundbreaking effects that other products cannot match. Certified by TÜV Rheinland Taiwan. It is applicable to fuel tanks with a capacity of 10 tons per unit. For more details, please download the catalog or contact us. You can watch the video here! ↓↓↓ http://www.youtube.com/watch?v=kj1OGYJ_aI0

• Other energy equipment

Can reduce heavy oil viscosity by one-tenth. Effective for diesel oil as well. A revolutionary fuel-saving device.

Comprehensive catalog of fuel-saving devices from 101 Environmentally Friendly Green Energy Co. The device is effective for both diesel oil and heavy oil, successfully reducing the viscosity of heavy oil from 180 cSt to 18 cSt. NMR testing has proven a 20% increase in oil molecules, demonstrating groundbreaking effects that other products cannot match. Certified by TÜV Rheinland Taiwan. Currently offering a free "Comprehensive Catalog of Fuel-Saving Devices."

• Other energy equipment

Achieved an average fuel consumption reduction of 10%! This is the fuel consumption test report for the 101iSaver in marine diesel engines.

This is a test report of the 101iSaver conducted by the Southeast Asian Fisheries Development Center in Bangkok, Thailand. The fuel consumption test conducted on the "6CH-HTE3" Yanmar marine diesel engine showed that approximately 10.22% in fuel consumption could be saved. For more details, please download the report file or contact us.

• Other energy equipment

Report on engine efficiency tests conducted with iSaver, where higher power generation allows for a greater reduction in fuel consumption.

According to the test results, after using the DCH FUEL ECONOMIZER fuel-saving device, a reduction in diesel fuel consumption was observed. When generating power for one hour at 27kW, the fuel consumption decreased from 8.95 liters to 8.5 liters, resulting in a savings of 5.03%. When generating power for one hour at 40kW, the fuel consumption decreased from 12.554 liters to 11.081 liters, resulting in a savings of 11.73%. For more details, please download the catalog or contact us.

• Other energy equipment

Patent applications filed in 50 countries worldwide. Capable of reducing heavy oil viscosity by one-tenth. A groundbreaking fuel-saving device.

Excerpt from the comprehensive catalog of 101 Environmentally Friendly Green Energy Co.'s fuel-saving device. It is effective for both diesel oil and heavy oil, and we have successfully conducted experiments that reduced the viscosity of heavy oil from 180 cSt to 18 cSt. The NMR testing has proven a 20% increase in oil molecules, demonstrating groundbreaking effects that other products cannot match. Certified by TÜV Rheinland Taiwan. The comprehensive catalog excerpt for the fuel-saving device iSaver is currently available for free. For more details, please download the catalog or contact us. [We are currently seeking agents in Japan!!]

• Other energy equipment

We are currently seeking trading companies to represent the groundbreaking fuel-saving device "iSaver"!

101 Environmentally Friendly Green Energy Co., Ltd. was established in 2009. We are engaged in manufacturing that reduces oil consumption for cars and ships while increasing power. Our main product is the fuel-saving device "iSaver," which is available in various tank sizes. By using "iSaver," it is possible to reduce the viscosity of heavy oil to one-tenth. It is also effective for diesel oil. We are currently seeking trading companies in Japan to represent our popular product "iSaver." For more details, please contact us!

• Other energy equipment

It was found that fuel consumption was reduced by 21.9%. The groundbreaking fuel-saving device "101iSaver."

This is a fuel consumption test conducted by the Hong Kong Electrical and Mechanical Services Department (EMSD) using the iSaver "GT-01" from 101 Environmentally Friendly Green Energy. The test involved running a vehicle model "MAZDA-E2000" and recording fuel consumption before and after the installation of the "GT-01." The results showed that the fuel consumption rates were 7.43 (km/L) before installation and 9.06 (km/L) after installation, indicating a fuel savings of approximately 21.9%. It is not an exaggeration to say that this is a groundbreaking fuel-saving device. For more details, please download the catalog or contact us.

• Other Auto Parts
• Other energy equipment

[Experiment Report] It was found that heavy oil consumption was reduced by approximately 28 liters per hour. The fuel-saving device "101iSaver" achieves even greater feats!

This is a test of fuel consumption for heavy oil at the Philippine base of the renowned Taiwanese company, Uni-President Enterprises, using the fuel-saving device iSaver "GT-03" from 101 Environmentally Friendly Green Energy for ships and boilers. We measured and recorded the fuel consumption before and after installing the fuel-saving device "101iSaver GT-03" on the number 2 boiler used for instant noodle production. The results showed an average fuel consumption of 186.44ℓ/hr before installation and 158.59ℓ/hr after installation, indicating a fuel saving of approximately 28ℓ/hr (fuel saving rate of 14.93%). If operated continuously for 24 hours, this means that about 672ℓ of fuel can be saved. For more details, please download the catalog or contact us.

• Other energy equipment

In the latest "Age Estimation Evaluation Test" conducted by NIST, the AI facial recognition engine "FaceMe" ranked 5th in the world. 【What is the NIST FATE Age Estimation Evaluation Test?】 The NIST FATE Age Estimation Evaluation Test is one of the international benchmarks for facial analysis technology conducted by the National Institute of Standards and Technology (NIST) in the United States, which evaluates the age estimation accuracy of AI algorithms using a large-scale facial image dataset. 【Evaluation Results of FaceMe】 - World Ranking: 5th FaceMe ranked 5th among 20 global vendors, demonstrating top-class accuracy in an international competitive environment. - Mean Absolute Error (MAE): 2.87 years The average error in FaceMe's estimated age is 2.87 years, with only a 0.35-year difference from the top-ranked algorithm, achieving world-class accuracy. *MAE (Mean Absolute Error): Quantifies the error in estimated age (the smaller the number, the higher the accuracy). *NIST conducted the evaluation using 1 million facial images of individuals aged 18 to 30.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.