The catalog for the "LTE-compatible remote monitoring device" has been updated.

Immediately notifies of equipment abnormalities. [This is a remote monitoring device with LTE support.]

The "IP3-LP8-2" device has 8 contact inputs and 2 contact outputs, and when used with the dedicated adapter set UM04-KO, it enables the monitoring and control of equipment and devices with contacts over LTE. It contributes to early fault detection and addressing personnel shortages. ■ Contact Input/Output It has 8 contact inputs that report state changes and allow remote monitoring. New settings have been added for reporting contact changes and determining the ON/OFF judgment time, enabling various input judgments. It has 2 contact outputs that allow for remote control and state acquisition. ■ Support for both Socket Communication and Email Communication In the case of socket communication, it can perform contact input notifications, control contact outputs, check contact input states via polling, and notify of power outages/restorations. In the case of email communication, it can perform contact input notifications, regular notifications, and notify of power outages/restorations. ■ Contact Monitoring and Output Control Function During Power Outages Even during a power outage, contact monitoring and contact output control can be performed.

• Other security and surveillance systems
• Demand Monitoring
• Other network tools

Immediately notifies of equipment abnormalities. [This is a remote monitoring device with LTE support.]

The "IP3-LP4" is a device that has 4 contact inputs and 1 contact output, and when used with the dedicated adapter set UM04-KO, it enables the monitoring and control of equipment and devices with contacts over LTE. It contributes to the early detection of faults and addresses personnel shortages. ■ Contact Input/Output It has 4 contact inputs that accumulate the ON time and count of each contact. Additionally, it has 1 contact output that can be controlled by commands from the center. ■ Supports both Center Communication and Email Communication In the case of center communication, it can notify contact input, control contact output, check contact input status through polling, and notify of power outages/restorations. ■ Reliable Email Sending When sending emails from the IP3-LP4, it will repeatedly resend until a reply email is received, ensuring that the responsible person reliably receives the information generated. ■ Selection of Email Sending Information You can choose whether to send or not send each piece of information, such as contact input data and power outage/restoration notifications, for each email recipient. *For more details, please feel free to contact us.

• Other security and surveillance systems
• Demand Monitoring
• Other network tools

A serial transfer service that enables control of remote RS-232C devices by sending an email to a specified email address.

"iND MIST2" is a service that converts data from terminal devices such as RS-232C equipment into TCP/IP using our LTE-compatible communication terminal, and sends it to our data center, from where it is sent via email to a dedicated email address for the terminal. By connecting our "iND MIST2 compatible products" to RS-232C equipment, customers can receive data from RS-232C devices as emails on mobile devices such as mobile phones and smartphones, or on email software on their office computers.

• Other security and surveillance systems
• Other network tools
• Other security

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

When measuring the flow rate of liquids or gases that are unsuitable for plastic due to high pressure or high temperature, our robust "glass tube variable area flow meter (rotameter)" allows for more accurate flow measurements. It offers a wider flow range and is suitable for various liquids and gases! 【Features】 ■ Glass tube variable area flow meter ・ Flow measurement technology with high durability, economy, and excellent operability ・ Capable of a wider flow range, suitable for various liquids and gases ■ Metal tube variable area flow meter ・ Durability and accuracy that withstands high pressure and harsh temperature environments 【Product Lineup】 ■ Glass tube variable area flow meter ・ Sho-Rate models 1350, 1355, 1358 ・ GT1600 series ■ Metal tube variable area flow meter ・ MT3750 series ・ MT3809 series ▼ For more details, visit https://www.brooksinstrument.com/ja-jp/products/variable-area-flow-meters

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.