Norwegian Sequencing Centre enhances multiomic workflows with automated liquid handling

NGS library preparation and PCR/qPCR workflow, active in various scenes!

◆ Equipped with different dispensing heads 　・Supports 96ch / 384ch / 8-channel / 16-channel chips, multi-channel dispensing head (apricot-head) 　・Independent 3 or 6 channel non-contact dispensing head (dragonfly-head) In NGS library preparation, sample transfer, mixing, and supernatant removal (bead purification) are handled by chip-type dispensing heads, while the addition of various reagents such as buffers and enzymes is managed by non-contact dispensing heads. This enables low dead volume, significant reduction in chip consumption, increased speed, and space-saving (reduction in the number of required chip racks). Additionally, the dragonfly head can dispense from 200nL, allowing for the execution of micro-volume protocols. It also supports screening in general drug discovery. With a compact design (W 660 x D 560 x H 800 mm), it contributes to solving space issues in laboratories. Screening, high throughput. Compatible with high viscosity and high density. For applications such as NGS library preparation, DNA/RNA extraction and purification, etc.

• Other analysis and sequence

Make dispensing work easier! Personal dispenser with interchangeable 96/384 heads.

The apricot S3 is a high-performance dispensing system with 96/384 heads suitable for both low-throughput and high-throughput applications. With an intuitive interface using a tablet and its unique EZ-Load chip technology, it is a user-friendly automatic dispensing system that offers high dispensing uniformity and reproducibility. ● The 96-channel and 384-channel heads can be easily exchanged, allowing one unit to handle a wide range of dispensing operations. ● The deck can accommodate three plates, reservoirs, etc., and automatically moves to preset positions (X, Y, Z). ● It is capable of suction and dispensing into microplates, microtubes, deep well plates, and stacked microplates. ● A large touchscreen and intuitive interface make it easy for anyone to use. ● Its compact design allows for use within a clean bench.

• Automatic Dispensing Device

High versatility, high viscosity is also not a problem. Positive displacement non-contact dispenser.

The Dragonfly Discovery is a new non-contact dispenser that employs both positive displacement technology and disposable syringes. With its high versatility and user-friendly software, it can accommodate various assays and research with just one unit. ● Positive Displacement Technology This method uses a piston to push out the liquid. It allows for accurate dispensing of various solutions, such as those with viscosity and surface tension, without the need for class settings for each liquid. Examples: 80% glycerol, 50% EtOH, cell suspensions, etc. ● Supports Various Assays With intuitive dedicated software, you can easily design dispensing for biochemical assays, cell-based assays, bead-based assays, and more. It is also possible to control dispensing time, perform normalization, and dispense in a gradient-like manner. ● No Contamination Using disposable syringes eliminates the risk of carryover and cross-contamination. This dispensing machine has high versatility, suitable for DoE (Design of Experiment), ELISA, three-dimensional cell culture, protein crystallization assays, and more.

• Automatic Dispensing Device

For dispensing applications of several hundred nL!

The "mosquito HTS" is a robust nanoliter-scale dispensing device that employs a positive displacement method. It not only allows for precise aspiration and dispensing but also enables accurate mixing, making it suitable for various applications. By minimizing the sample volume in sample management workflows and genomics research, it contributes to cost reduction. ● Cost reduction through miniaturization and low dead volume With its accurate dispensing mechanism, it handles precious samples and expensive reagents in small volumes while minimizing dead volume, significantly reducing running costs. ● Reduced hands-on time and improved reproducibility through automation With rapid and precise operation, it eliminates dispensing errors and cross-contamination caused by human error, enhancing reproducibility. ● Improved data reliability through increased sample size The benefits of miniaturization extend beyond mere cost savings; it allows for multiple experiments to be conducted in parallel, thereby enhancing data reliability. ● User-friendly The easy-to-use software makes the protocol creation process very simple.

• Other dispensing equipment
• Automatic Dispensing Device
• Other Nucleic Acid/DNA Research

In February of this year, we inquired about "paperlogic" using the Ministry of Economy, Trade and Industry's gray zone resolution system regarding the "provision of electronic contract services to the construction industry," and received a response stating that "paperlogic meets the standards related to construction contracts under the Construction Business Act Enforcement Regulations (Article 13-4, Paragraph 1, Item 1 (h) and Paragraph 2)." ◆ Accelerating DX in the Construction Industry with 'Official Approval' The construction industry faces challenges in digitizing contract operations due to the complexity of contracts, the presence of numerous stakeholders, and legal requirements and security concerns. However, due to the nature of the business, detailed contract operations occur frequently in the construction industry. Therefore, by digitizing contract operations, this sector can benefit significantly from cost reductions, such as stamp duty and labor costs, as well as shortened timeframes for contract execution. ◆ Package Plans for the Construction Industry Also Available paperlogic offers the 'paperlogic Construction Document DX Pocket' to facilitate smoother transactions between general contractors and partner companies. Please feel free to try our trial service from the "Service Application" section.

We would like to introduce the '96 Non Jacket Tubes 1.3ml Type' that we handle. These tubes are autoclavable and compatible with DMSO and vapor phase liquid nitrogen. They come with a rack lid locking feature and an anti-rotation function. Please feel free to contact us if you have any inquiries. 【Features】 ■ Rack lid locking feature ■ Anti-rotation function ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with vapor phase liquid nitrogen *For more details, please refer to the related links or feel free to contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.