Thank you for visiting INTERMOLD2025.

Remove deposits of epoxy and POM, resin coatings, and rubber adhesion!

The "Hagitore" is a vacuum boiling ultrasonic cleaning machine that quickly removes stubbornly adhered dirt through the synergistic effects of four elements: reduced pressure, boiling, ultrasonic waves, and a special cleaning solution. It is effective for removing deposits of epoxy, elastomers, POM, and rubber that are stubbornly stuck to molds. It removes only dirt without damaging the molds and can clean multiple items at once. Cleaning with Hagitore alone is effective, but when combined with the mold cleaning machine "Kuripika Ace," it can handle a wider variety of dirt types. Recommended industries: plastic molding, extrusion molding, transfer molding, die casting, pressing. **Cleaning Examples:** - Removal of resin clogged in the nozzles and breaker plates of molding machines. - Removal of epoxy, silicone, and thermosetting resins adhered to molds for semiconductor encapsulants. **Benefits:** - Significant reduction in cleaning time. - Reduction in maintenance frequency. - Reduction in maintenance costs. → Improved productivity. **Problem Solving:** - Stubborn dirt (resin = epoxy, PPS, silicone, fluorine) → Dirt that has been difficult to remove can be eliminated with Hagitore. - Labor shortages → The machine can work continuously regardless of working hours. - Variability in quality → With the machine, there are no differences in maintenance, ensuring consistent quality.

• Other cleaning machines

Wash multiple mold parts at once! Safe and secure mold cleaning without using organic solvents! Free comic materials on the dangers of organic solvents.

Using a mold cleaning spray that contains harmful "organic solvents," each mold part is maintained by hand one by one. ↓ With the safe and secure mold cleaning machine, Kuripika Ace, you can wash multiple mold parts at once! This reduces maintenance time! 【Conventional Mold Maintenance】 ● Very labor-intensive due to manual work ● Time-consuming and lacking manpower ● There are areas like the inner corners of molds that are hard to reach ● Hand polishing can cause scratches on the molds ● Concern about the burden on the body due to the use of organic solvents 【Mold Cleaning Machine 'Kuripika Ace'】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Cleans multiple molds at once 〇 Cleaning solution penetrates every corner of the mold and removes dirt 〇 Dirt is lifted and removed, causing no damage to the mold 〇 Uses a water-based cleaning solution with low environmental impact and contains no organic solvents We offer a lineup tailored to the size of the molds. *For details, please see "Lineup." : We have uploaded a comic about the dangers of organic solvents:

• Other cleaning machines

Remove and prevent rust accumulated in the mold temperature control piping and cooling pipes to improve cooling efficiency!

The "Water Remover" is a rust removal machine that automatically handles everything from cleaning mold temperature control piping to rust prevention. It removes layers of rust and impurities that have accumulated in the mold temperature control piping, improving cooling efficiency. 【Features】 - No need to disassemble the mold; simply connect the mold and this product with a hose for easy operation. - Forms a rust prevention coating simultaneously with rust removal. - Adopts an air blow drying system, eliminating the need for rinsing or neutralization after rust removal. - Does not discharge rust removal liquid due to a completely closed system.

• Other cleaning machines
• Other surface treatment equipment
• Other cleaning equipment

A welding machine that does not emit ultraviolet rays or fumes, eliminating the need for protective face shields and masks. It also prevents warping and distortion caused by heat!

Just when you're in a hurry, the mold suddenly breaks. You want to use it right away... The mold repair welding machine "Morhei" does not produce ultraviolet rays or fumes, allowing for mold repairs to be done with the naked eye without the need for protective face shields or masks. It welds at a temperature that won't cause burns even if touched with fingertips, enabling continuous power supply. Since it can build up material in a "surface" rather than just a "point," it can weld quickly without sparking. Another feature is that it is difficult to miss the target because the electrode is applied directly to the welding area. It prevents shrinkage and distortion caused by heat, and there is no thermal discoloration after welding. 【Features】 〇 Uses a paste-like welding material that fuses with the base material with minimal heat 〇 Capable of continuous welding from thick to thin linear buildup 〇 Compact design for portability 〇 No preheating or post-heating treatment required

• Plastic Mould
• Other molds
• Welding Machine

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

At the Brother booth, we will showcase three new product models. We will demonstrate the high productivity of SPEEDIO by "actually machining." Additionally, we will introduce the latest NC functions that leverage our integrated mechatronics development. We invite you to take this opportunity to visit our booth and see Brother's latest products and solutions that contribute to our customers.

Ansys Simulation World 2025 Japan will be held on Friday, October 10, 2025, at the ANA InterContinental Hotel Tokyo! On that day, we will also have a booth as a sponsoring partner, where we will introduce our fatigue life prediction analysis software, FEMFAT. Additionally, we will give a presentation on Fatigue Analysis using FEMFAT inside ANSYS Workbench. If you attend, please be sure to stop by our booth.

We will showcase products centered around AVEVA, including InTouch Unlimited Professional, AVEVA Reports, and Historian, as well as the product "Ω Eye" from Sofix, which digitizes old machines and meters using a camera, and the operational monitoring of the MXT's operational monitoring AE series.

We will showcase products centered around AVEVA, including InTouch Unlimited Professional, AVEVA Reports, and Historian. We will also present the product "Ω Eye" from Sofix, which digitizes old machines and meters using a camera, as well as the operational monitoring and operational supervision AE series in collaboration with MXT.