TAIYO High Flow Servo Unit [ECO Type Unit with Low Hydraulic Oil Consumption] will be officially released.

The comprehensive monitoring system for load and stroke, "Atsukan," has been updated with a new controller, making it easier to manage and control.

Our company's unique press-fitting management system, "Atsukan PQC Series," has a history of over 30 years and boasts more than 3,000 successful installations. Developed by a team of assembly machine professionals, it follows the AC servo nut runner designed to streamline screw tightening operations and ensure quality. This system consolidates the know-how of the press-fitting process, one of the assembly tasks, and is built on a highly reliable hydraulic cylinder.

• cylinder
• Pressure Control

A high-performance hybrid unit with an independent hydraulic drive unit equipped with a hot water servo.

In response to customer feedback, we have developed the drive unit section that was set with our Atsukan servo actuator as an independent unit. In addition to the existing small to medium flow servo units (1.1cc, 3.5cc, 11cc), we have now added larger flow servo units (19cc, 30cc, 40cc, 60cc) to our lineup. The addition of the large servo units enables high-speed operation at high thrust. Despite their size, they offer excellent energy efficiency (operating energy efficiency is 85-95%). They can be easily mounted on hydraulic actuators equipped with various length sensors and load sensors. Being hybrid, they use a small amount of operating oil, making them environmentally friendly servo units.

• AC Motor
• Hydraulic Equipment
• Press Dies

A dedicated servo controller featuring a high-speed CPU has been introduced, enabling advanced load control, speed control, and positioning control with simple operation in a hydraulic servo system.

We have completed the advanced energy-saving intelligent hydraulic control unit "Atsukan Servo/PQCS2 Series," which combines a direct drive hydraulic servo with excellent economic efficiency and a cylinder equipped with load and length measurement sensors, in an environment without control valves and piping. The data from the built-in position sensor and load sensor in the cylinder enables arbitrary load and positioning control. (The cylinder with load sensor has been patented in the United States, Japan, and eight European countries.) Positioning accuracy: ±0.02mm Load accuracy: ±3% High thrust with continuous holding capability.

• Actuator
• cylinder
• Servo

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

We will be exhibiting jointly with Ando Corporation at the "22nd Pipe and Equipment Comprehensive Exhibition 2025 OSAKA," which will be held for three days from September 11 (Thursday) to September 13 (Saturday), 2025, at Intex Osaka, Hall 6A. Please be sure to stop by when you visit. 【Exhibition Schedule】 ● Environmentally friendly heat exchanger "Heat Recovery Heat Exchanger" ● Cut model of "Stainless Steel High Efficiency Heat Exchanger" ● Skeleton model of heating and cooling heat exchanger "SK Water Coil" ● Cooling heat exchanger "SK Water Coil Cartridge Type" ● Radiant heating pipe for space heating "SK Aerofin Tube" ◆ Event Dates: September 11 (Thursday) to September 13 (Saturday), 2025 10:00 AM to 5:00 PM (until 3:00 PM on the last day) ◆ Venue: Intex Osaka, Hall 6A Address: 1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture, 559-0034 Access: https://www.intex-osaka.com/jp/access/ ◆ Booth Number: 112 ◆ Admission Method: Pre-registration required (free) *Please check the official website for details.