New Product: Small Vibrator, General Purpose Type: PM Series

Lightweight, portable, and highly durable! Easy to handle! Some models come with a built-in amplifier and sine wave generator! A variety of lineups available!

We handle the "Compact Vibration Tester (General Purpose Type)" manufactured by DynaLabs. This product is compact yet has high performance as a testing device, and it can flexibly accommodate various angles thanks to its adjustable base. The "PM-20" and "PM-100" come with built-in amplifiers and sine wave generators, and can be adjusted to frequencies ranging from 1Hz to 15,000Hz. 【Features】 ■ Lightweight, portable, and highly durable, easy to handle ■ Flexible adjustment to various angles with the adjustable base ■ Wide frequency range ■ PM-20 and PM-100 have built-in amplifiers and signal generators *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Vibration Testing
• Other analyses

Lightweight and compact design! A lineup of small inertial-type vibrators.

We handle the "Small Vibrator (Inertial Type)" manufactured by Dynalabs. This product features a lightweight and compact design that is portable enough to be held in hand. Additionally, it can be mounted at various angles and achieves operational performance at low frequencies. 【Features】 ■ Lightweight and compact design ■ Operational performance at ultra-low frequencies ■ Mounting at various angles ■ Equipped with low-friction bearing guide *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other analyses

Flexible support for various angles with an adjustable base! A lineup of small vibrators for modal analysis.

We handle the "Small Vibrator (for Modal Analysis)" manufactured by DynaLabs. This product is lightweight, making it highly portable, and it is easy to align the modal analysis stick with the hole at the tip. The "DYN-MS-440" is capable of vibration with a maximum frequency of 5,000Hz, a maximum output of 440N, and a maximum displacement of 25mm, all while being lightweight. 【Features】 ■ Easy alignment of the modal analysis stick with the hole at the tip ■ Lightweight and highly portable ■ Flexible adjustment to various angles with an adjustable base ■ 25mm stroke and wide frequency range *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other analyses

Durability testing of each component on the circuit board under vibration conditions is very important for ensuring the performance of the substrate.

Durability testing under the vibration environment of circuit boards is very important for ensuring the performance of the boards. We would like to introduce how our vibrator is used in such tests.

• Vibration Testing

Testing the shooting functions of digital cameras under vibration environments is very important for confirming the camera's functionality, and an exciter is used for the tests.

Recent digital cameras have become very high-performance and highly integrated, with features such as autofocus and image stabilization being standard. In the process of testing these functions, we would like to introduce how our vibration testers are being used.

• Vibration Testing

The low-voltage fuse "SBFC-MS2" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. It is particularly effective for devices in automobiles where the current temporarily spikes. For example, it protects power window motors, which may blow regular fuses due to the large current that flows temporarily during startup. It is recommended for those facing circuit protection challenges in the automotive and construction machinery industries, as well as for low-voltage fuses (below DC70V).

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.