Notice of Advertisement Publication in the Daily Industrial News, April 23, 2025 Issue

[Sanitary product / Heloor joint specification] For large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design without electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separate

• Other pumps

For transferring high-viscosity liquids in large volumes for acids and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with a regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

For transferring high-viscosity liquids in large volumes for solvents, acids, and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

For oil: Large capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with a small amount of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drum, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Finally, the long-awaited JBC brand soldering equipment direct sales online store has been launched. Free shipping nationwide in Japan, and all products of the JBC brand are available for purchase. More than 10 types of soldering tips, with quantity discounts for over 50. From the latest model compact stations to consumables, please be sure to visit our website.

The GRAUD WORKS2 series, which uses fully synthetic base oil and has obtained the latest API SQ standard. The '0W-30' has been added to the lineup of the GRAUD WORKS2 series!! < Features > Uses fully synthetic base oil. In addition to the robustness, fuel efficiency, and durability required by the latest API: SQ standard, it also enhances compatibility with seal rubber, reduces LSPI (Low-Speed Pre-Ignition), suppresses timing chain wear, and improves piston cleanliness, making it compatible with GPF. It is a wide-range type engine oil that can be used in a variety of vehicles from compact cars to sports cars. * For more details, please refer to the PDF document or feel free to contact us.

The 2025 Osaka-Kansai Expo is a grand stage where cutting-edge technologies and cultures from around the world intersect. In particular, the pavilions of Middle Eastern countries such as Saudi Arabia, the UAE, Qatar, and Oman resemble a miniature future city, showcasing advanced architecture, smart energy, and AI-controlled urban infrastructure, allowing visitors to experience "future urban living." These Middle Eastern countries are actively promoting sustainable urban development and smart city initiatives, with significant expectations for industrial revitalization. Optical filters and thin-film technology can be applied across a wide range of fields, including renewable energy facilities, transportation infrastructure, healthcare, and security. Adachi New Industries aims to support the technological foundation of these future cities and contribute to industrial innovation on a global scale. 【1】 Experiencing the Future City at the Kansai Expo 【2】 The Role of Optical Thin Films in the Revitalization of Middle Eastern Industries 【3】 The Vision of Future Cities Shaped by Optical Technology 【4】 A Bridge of Friendship Through Optical Filters. For more details, please visit our company website.