[News] Cooling system that contributes to power consumption reduction and improved power generation efficiency.

The "intake cooling system" and "air fin cooler" improve the reduction in cooling capacity and the decrease in power generation efficiency of gas turbines that occur during high temperatures.

In heat exchange mechanisms and power generation equipment that utilize outside air, efficiency decreases during the summer due to rising temperatures. The "intake cooling system" cools the air at the intake and just before the gas turbine, lowering the intake temperature and recovering about 3% of output. We also propose systems that enhance the heat exchange rate in air fin coolers and condensers, allowing them to demonstrate their effectiveness. *We have a wide range of systems using other spray nozzles as well. For quotes and custom solutions, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are also available at any time.

• nozzle
• Flow Control

Cooling effect of up to 5℃! Achieving significant reduction in electricity costs with recovery of power generation output!

This system lowers the inlet air temperature of gas turbines (and other engines) by 2 to 4°C through the latent heat of vaporization of fine mist, thereby recovering the power output that decreases with the rise in outdoor temperature during summer. By conducting simulation analyses and evaporation experiments, it is possible to build a system tailored to the shape of the intake duct and operating conditions. 【Features】 - A one-fluid intake cooling system that sprays semi-dry fog - Cools the inlet air of gas turbines (GT), gas engines, and diesel engines by 2 to 4°C - Recovers power output that decreases due to rising outdoor temperatures in summer - Can be installed on existing equipment - Minimizes drain generation *For more details, please refer to the catalog or feel free to contact us.

• Cooling system

Cutting power consumption! An outdoor unit cooling system that achieves high efficiency using mist.

The outdoor unit cooling system is a custom-made, made-to-order product that achieves water conservation and high efficiency by using mist. - A system that sprays fine mist to cool the outdoor unit through evaporative cooling. - Reduces power consumption and cuts costs during peak summer periods. - Excellent water-saving capabilities. - Capable of automatic operation based on temperature and time settings. *This product is a made-to-order item that custom-builds the cooling system for each site where the outdoor unit operates. Our sales representatives will gather information about the type and number of outdoor units, the installation location, the water used, and other details to propose the optimal cooling system for each customer. *This system is recommended for use at sites with more than 30 outdoor units. (In sites with fewer units, the energy-saving effect may be limited).

• Cooling system
• Water treatment equipment

Eliminate summer cooling deficiencies of air fin coolers! Auxiliary cooling system!

This is an air fin cooler cooling system that can reduce water usage by 40-80% compared to traditional sprinkler irrigation systems by spraying fine mist. It eliminates wet scaffolding by reducing drainage. It can be installed while the equipment is in operation, and we can propose a cooling system tailored to each site. 【Features】 - Air fin cooler cooling system that sprays fine mist - Reduces water usage by 40-80% compared to sprinkler irrigation - Eliminates wet scaffolding and improves the working environment by reducing drainage - Can be installed while the equipment is in operation - Supports installation at the bottom or top of the fins *For more details, please refer to the catalog or feel free to contact us.

• Cooling system

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This is an introduction to "outer diameter film polishing," which is used for ultra-finish machining of various shaft-type workpieces. - Wouldn't you like to achieve ultra-finish machining more easily, safely, and with less variation? Please take a look at what film polishing is, along with related products and catalogs!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.

Contec has added a BTO menu for the Windows 11-based embedded OS - Windows 11 IoT Enterprise LTSC 2024 to its industrial computer "MR4310 series" and has started accepting orders.