Mandatory due to legal amendments: Visualizing heatstroke risks! The wearable product 'hamon band S' is now available!

Heatstroke measures at the workplace have been mandated by law! This product is essential for heat prevention measures that detect abnormalities in employees and promote the early detection of heatstroke.

Starting June 1, 2025, it has become mandatory for businesses to implement measures against heatstroke in order to prevent its severity. The target is work sites where "work is expected to be carried out continuously for more than 1 hour or for more than 4 hours a day in environments with a WBGT of 28 degrees or higher or a temperature of 31 degrees or higher." You can also download materials summarizing the specific details of the revisions. The 'hamon band S' estimates changes in deep body temperature rise and fall from pulse wave information, allowing for instant detection of abnormalities in workers through a heatwave risk alert. It is rechargeable and not disposable, making it usable for several years! 【Three Features】 ■ No communication required: Easily detect abnormalities by simply wearing it on your wrist ■ Deep body temperature estimation: Estimates the rise and fall of deep body temperature using patented technology ■ Three-stage alert to notify of danger For more details, please refer to the PDF materials or feel free to contact us.

• Other temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments
• Other safety and hygiene products

Heatstroke prevention measures on-site have been made mandatory! This wearable device is essential for detecting employee abnormalities and promoting early detection of heatstroke as part of heat stress countermeasures.

Starting June 1, 2025, it has become mandatory for businesses to implement measures against heat stroke in order to prevent its severity. The target is work sites where "work is expected to be conducted for more than one hour continuously or more than four hours in a day under conditions of WBGT 28 degrees Celsius or higher or air temperature of 31 degrees Celsius or higher." The 'hamon band S' estimates changes in deep body temperature rise and fall from pulse wave information, allowing for immediate detection of abnormalities in workers through a heatwave risk alert. It is rechargeable and not disposable, making it usable for several years. 【Three Features】 ■ No communication needed: Easily detect abnormalities by simply wearing it on the wrist ■ Deep body temperature estimation: Estimates the rise and fall of deep body temperature using patented technology ■ Three-stage alert for danger For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments
• Other safety and hygiene products

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.