Efforts towards the environment

The half-value angle is 54 degrees on the horizontal plane and 70 degrees on the vertical plane! A 2.4GHz planar antenna weighing 190g.

The antenna type of the 2.4GHz planar antenna 'FP2409L' is a 1/2λ array, with a frequency range of 2400 to 2500MHz, linear polarization, and power handling of 1W. Additionally, the gain is 9dBi, the half-power beamwidth is 54 degrees in the horizontal plane and 70 degrees in the vertical plane, and the standing wave ratio is 2.0 or less. 【Product Specifications (Partial)】 ■Model: FP2409L ■Antenna Type: 1/2λ Array ■Operating Frequency: 2400 to 2500MHz ■Polarization: Linear Polarization ■Gain: 9dBi *For more details, please download the PDF or feel free to contact us.

• antenna

It is a slim and lightweight mat-type RFID antenna, making installation and relocation easy! It can be used placed under a carpet.

The FP9211 is a UHF band mat antenna that is ultra-thin, with a thickness of 5mm or less, allowing it to be placed under carpets for use. By utilizing orthogonal linear polarization, it can accommodate a wide range of tag orientations and achieve long-distance reading. Additionally, being a lightweight mat type makes it easy to install and move, and its focused directionality makes it suitable for applications such as entry and exit management. 【Features】 ■ Ultra-thin with a thickness of 5mm or less ■ Lightweight mat type for easy installation and movement ■ Uses orthogonal linear polarization to accommodate a wide range of tag orientations and achieve long-distance reading *For more details, please download the PDF or feel free to contact us.

• antenna
• Entrance and exit control system

Electronically control the beam radiation direction! Useful for reducing misreads of RFID tags.

The "FGA9204" is a product that can vary the radiation direction in three directions based on external signals. You can fix the radiation direction according to the position of the tag you want to read, or scan the radiation direction to control the detection area with a combination of two or more reading areas. 【Features】 ■ Active phased array antenna that electronically controls the beam direction ■ Variable radiation direction in three directions based on external input signals ■ Controllable from the reader's GPIO port ■ By scanning the beam direction, it can grasp the approximate position of the tag ■ Expected reduction of misreads through a combination of switching the radiation area and software processing ■ Useful for gates that respond only to tags in a specific area by narrowing down the tag's position ■ As it is an array antenna, it can be used as a narrow directional antenna without scanning the radiation direction *For more details, please download the catalog or feel free to contact us.

• antenna

Enables a stylish design for ultra-thin, narrow-directional gates! With a circularly polarized RFID antenna, it minimizes misreads and manages quantities effectively.

The "FG9206Y/FG9206Y-3" has a focused directionality that narrows the tag reading area, making it suitable for logistics quantity management using UHF band RFID and for anti-shoplifting gates. 【Features】 ■ Pinpoint detection by narrowing directionality ■ Slim design allows for stylish gate designs ■ Can be installed on walls or under floors ■ Usable for various applications beyond gates *For more details, please refer to the PDF document or feel free to contact us.

• antenna
• Entrance and exit control system

A left-handed circularly polarized antenna that can be combined with a specific low-power reader/writer! Waterproof types are also available, making it suitable for narrow factory lines.

The FP9203 has a gain of 3dBi, making it an antenna that can be combined with specific low-power reader/writers. Its compact size makes it suitable for applications that require space-saving solutions. 【Features】 - Compact size allows installation in narrow production lines - UHF band enables long communication distances and wide-ranging communication - Capable of reading multiple tags simultaneously, reducing time for inventory management and stocktaking - High-precision inventory management through automatic data recording - Waterproof options available, effective in environments where water droplets may be present - Linking individual information allows for rapid and accurate tracking of manufacturing and distribution processes - Reducing food waste by optimizing production volume through accurate inventory management *For more details, please refer to the PDF document or feel free to contact us.

• antenna
• Entrance and exit control system

Read only the targeted RFID tags! It is suitable for narrow production lines where you want to limit the reading range and reduce misreads.

The FSP9203 is an antenna suitable for applications that require a limited reading area. It has a sharp directional focus, allowing it to read only the tags directly in front of the antenna, and since it is not a proximity type, the reading area extends vertically as well. 【Features】 - Accurate inventory management by reading only the desired tags - Cost reduction by eliminating the need for a radio wave absorption zone - Real-time product tracking enables pinpoint identification in case of issues - Efficient management is possible as multiple tags can be read at once even in a narrow area *For more details, please refer to the PDF document or feel free to contact us.

• antenna
• Document and Data Management
• Storage shelves

Monitor the entry and exit of people! A UHF band RFID antenna that can be easily installed just by placing it under the carpet.

The FP9211 is ultra-thin and lightweight, with a thickness of less than 5mm, making installation and movement easy. Its directional focus makes it suitable for applications such as entry and exit management. 【Features】 - Detects the entry and exit of individuals with tags simply by passing over the mat. - Lightweight mat type requires no installation, making setup and relocation easy. - Uses orthogonal linear polarization, allowing for wide compatibility with tag orientations and enabling long-distance reading. *For more details, please download the PDF or feel free to contact us.

• antenna
• Entrance and exit control system

In cars equipped with various wireless systems, wireless technology is one of the essential technologies!

As you all know, cars are equipped with many wireless systems. They are indispensable for improving safety and convenience. - Immobilizer (LF band) - FM (MF band) - AM (HF band) - Keyless entry, GPS (UHF band) - ETC/DSRC (SHF band) - Collision avoidance detection (millimeter wave) The frequency bands used are varied. Until now, many wireless technologies have been used for preventive safety to prevent accidents, such as collision avoidance. Based on the vast amount of accumulated information, it is said that autonomous driving technology will increase exponentially in the future. Wireless technologies such as millimeter wave radar, LiDAR, and GPS are essential for autonomous driving, and high reliability is also required. "Continuous wireless" and "wireless that compensates when interrupted" will be demanded at even higher levels going forward. Our company not only has a track record of supplying antennas for vehicles but also has experience supplying antennas for satellites launched on rockets. To meet various needs, we provide products with meticulous designs while conducting measurements in an anechoic chamber.

• antenna

Antenna manufacturer for wireless devices! With 40 years of trust and achievements, we meet the needs of various fields.

Fengguang Electronics Co., Ltd. is a manufacturer that designs, evaluates, manufactures, and sells peripheral products for wireless equipment, including: - Antennas for communication devices - Various coaxial connectors - Various cable assembly products - RFID readers/writers We conduct measurements and evaluations using our own anechoic chamber and measuring instruments, and we engage in OEM business that provides a seamless process from custom design and manufacturing to sales tailored to customer needs. Our products are utilized not only in wireless devices and measuring instruments but also in applications requiring high reliability, such as railways, satellite launch rockets, and automotive uses. In addition to standard RFID antennas, we can also procure and provide the most suitable products from both domestic and international sources based on specific requests. <Features> ■ Complete in-house (domestic) OEM solutions for antennas ■ High reliability product development system with a fully equipped anechoic chamber ■ Wide-ranging support for assembly, machining, soldering, etc. ■ Small lot orders are also welcome *For more details, please download our catalog or feel free to contact us.

• antenna

Just place items with RFID tags on top of the antenna! Real-time visualization at the shelf level eliminates the need for visual checks or handheld scanners, reducing labor.

The shelf antenna "FZ9205-2" is a thin and suitable antenna for applications in smart shelves. 【Features】 ■ Thin and suitable for applications in smart shelves ■ Dimensions that match standard bookshelves with a width of 900mm ■ Directionality that suppresses radiation to the outside of the antenna ■ High gain, allowing for reading even with rough tag placement ■ Usable for purposes other than shelf management *For more details, please download the catalog or feel free to contact us.

• antenna
• Document and Data Management
• Storage shelves

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

On November 6th (Thursday) to 7th (Friday), 2025, we held the "Human Body Day 2025" at the NAC Image Technology Akasaka Multi-Purpose Space. We have uploaded videos of the highlights from each company and the presentations that took place on the day to our website. We encourage you to take a look. ---[Report on Human Body Day 2025 is here]------------------- https://info.nacinc.jp/jintaiday2025-report ------------------------------------------------------------------------- On the day of the event, participants were able to experience a wide range of products in a hands-on session format, including motion capture, force plates, eye tracking, and human body analysis software. We received numerous comments from attendees expressing high satisfaction, saying, "It was great to gain various information all at once," which makes us very happy. NAC Image Technology will continue to provide "valuable products to our customers." We hope you will join us for our next event as well.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed