Amada Group will exhibit at "MF-TOKYO 2025, the 8th Press, Sheet Metal, and Forming Exhibition."

Amada Group will exhibit at "MF-TOKYO 2025, the 8th Press, Sheet Metal, and Forming Exhibition."

The Amada Group will exhibit at the "MF-TOKYO 2025 8th Press, Sheet Metal, and Forming Exhibition" held at Tokyo Big Sight from July 16 (Wednesday) to July 19 (Saturday). 【Highlights of the Amada Booth】 1. The largest booth at MF-TOKYO! 2. Ten latest solutions to address recent labor shortages and skill inheritance challenges! 3. First public exhibition of award-winning works from the Sheet Metal Fair! Displaying nine works that received awards, including the Minister's Award. 4. Introduction of a wide range of processing technologies from the Amada Group, not limited to sheet metal, including press, cutting, and grinding! 【Overview of Exhibited Models】 - Fiber Laser Machines: 2 models - Punch and Fiber Laser Combination Machine: 1 model - Bending Machines: 3 models - Fiber Laser Welding System: 1 model - Fiber Laser Marker: 1 model - Production Management Software: 1 product - Autonomous Mobile Robot (AMR): 1 model This will be an opportunity to experience the total solutions proposed by Amada. We look forward to your visit. For more details, please refer to the related links below.

• Other processing machines

Achieve shorter piercing times and further high-speed, high-quality processing with the high-quality light of a high-brightness oscillator! Achieve lower running costs compared to plasma and CO2 lasers!

The "VENTIS AJe Series" is a fiber laser machine equipped with the technology "LBC (Trajectory Beam Control)" that allows for free control of the laser beam's trajectory. Depending on the material and plate thickness, suitable beam trajectories can be selected, and when combined with a high-brightness oscillator, it achieves top-level performance in the 4kW and 6kW class. Additionally, further high-speed processing is possible with the high-brightness beam, enabling even faster processing. 【Features】 ■ Significant improvement in aluminum processing capability ■ High-speed, low-cost processing of stainless steel ■ Eco-cutting and high-speed piercing of thick mild steel plates are possible ■ Significant reduction of stainless steel dross *For more details, please refer to the catalog or feel free to contact us.

• Other processing machines

High-quality processing of various materials such as stainless steel and aluminum through beam control. Fiber laser machine 'VENTIS-AJe series'.

The materials that require processing are diverse. Among them, there are materials like stainless steel and aluminum, which tend to produce dross and are difficult to process. Even if one wants to expand their range of work, there are challenges in ensuring quality while making the business viable. One of the causes of dross generation is insufficient heat on the underside of the material. The solution to this is the fiber laser machine 'VENTIS-AJe series.' 【Features】 ■ Improved cutting surface quality ■ Significant enhancement of aluminum processing capability ■ High-speed, low-cost processing of stainless steel ■ Significant reduction of stainless steel dross *For more details, please refer to the catalog or feel free to contact us.

• Other processing machines

Lower running costs compared to plasma and CO2 lasers! Beam control allows for changes in light shape, reducing dross! Improved thick plate processing performance.

The "ENSIS-AJe Series" is a wide-range fiber laser machine capable of processing materials from thin plates to thick plates. The beam variable unit creates a beam shape tailored to the material and plate thickness, allowing full-range processing with a single machine. Fiber lasers have an energy efficiency that is about three times that of CO2 lasers, making them highly energy-efficient and capable of significantly reducing power consumption. 【Features】 ■ Capable of processing from thin plates to thick plates with one machine ■ Energy-saving performance unique to fiber lasers ■ Enhanced thick plate processing performance with dynamic beam control ■ Suitable for customers handling various materials and plate thicknesses *For more details, please refer to the catalog or feel free to contact us.

• Other processing machines

High-speed processing with fiber laser! A composite processing machine capable of high-speed drilling, high-height forming, tapping, and burr forming, thanks to improved punching speed!

We would like to introduce our high-speed punch and fiber laser hybrid machine, the 'EML-AJe series.' Equipped with a 3kW fiber laser oscillator, it enables high-speed processing and reduced running costs in the thin plate processing area for clean cuts. The table cabin and shutter shut out laser light leakage, achieving both space-saving and operator safety. 【Features】 ■ High productivity and low running costs ■ Realization of high-speed, high-quality punching ■ New features to support longer operating hours (optional) *For more details, please refer to the catalog or feel free to contact us.

• Other processing machines

Environmentally friendly high-precision servo bending machine! Compact design with automatic mold exchange device.

The "EGB-6020ATCe" is a servo bending machine that considers both people and the environment, pioneering the future of bending with operator support functions and a new servo drive system. It features fully automated opening and closing of the ATC shutter and a pinch prevention function, ensuring both operator safety and work efficiency. Additionally, we also offer the "EGB-1303ATCe" with a pressing capacity of 1300kN. Please feel free to contact us if you need assistance. 【Features】 ■ Reduces CO2 emissions by up to 20% and oil usage by approximately 90% ■ Lowers environmental impact and maintenance costs ■ Equipped with AMNC 4ie ■ AMNC 4ie facial recognition (user authentication) ■ Reduces standby power consumption ■ Equipped with safety device AS-01 *For more details, please refer to the related links or feel free to contact us.

• Other processing machines

Bending machine equipped with a new servo drive system that reduces environmental impact and maintenance costs.

The "EGBe series" is a servo bending machine that reduces setup time through automation. With the addition of new options, it has evolved into an environmentally friendly machine that allows for high-precision and complex processing without mistakes or hesitation, making it usable even for beginners. Additionally, it reduces CO2 emissions by up to 20% and oil consumption by approximately 90%, lowering environmental impact and maintenance costs. 【Features】 ■ Reduces CO2 emissions by up to 20% ■ AMNC 4ie ■ AMNC 4ie facial recognition (user authentication) ■ Reduces standby power consumption ■ Compatible with safety device AS-01 ■ Enhanced visibility back gauge *For more details, please refer to the related links or feel free to contact us.

• Other processing machines

In robot welding, not only can it replace TIG, but it can also achieve leg lengths comparable to semi-automatic welding. With concentrated energy, it allows for deep penetration, reduces heat-affected zones, and decreases defects.

We would like to introduce the fiber laser welding system "FLW ENSISe Series" proposed by Amada. With our newly developed in-house oscillator, we have equipped it with Amada's unique beam control system to solve various challenges faced by our customers. Additionally, due to its significantly higher heat exchange rate compared to conventional laser welding, running costs such as electricity bills can be greatly reduced. 【Features】 ■ High-speed, high-quality processing ■ Push-pull filler mechanism ■ Beam weaving mechanism ■ NC focal point control ■ Setup navigation *For more details, please refer to the PDF materials or feel free to contact us.

• Welding Machine

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

HP Inc. will hold the "HP Future of Work AI Conference 2025" at Tokyo International Forum, Hall B. At this event, under the message "Freedom to be particular about how we work," we will introduce the possibilities of on-device AI and its practical applications, along with case studies and technological trends. Whether you are considering implementing AI or have already started using it, you are sure to find hints for your next steps. We sincerely look forward to your attendance.

Our company will be exhibiting at the "15th Agriculture WEEK (J-AGRI Tokyo)" held at Makuhari Messe from October 1 (Wednesday) to October 3 (Friday). In the Livestock Materials EXPO zone, we will be showcasing our popular products for livestock and facility horticulture, including the "retrofit mist system for existing fans in barns/greenhouses, easy-to-install integrated mist system TM" and the "new product, large cylindrical mist system TM," along with related products. We sincerely look forward to your visit. Our booth number is 36-34 in Hall 9 of Makuhari Messe.

Yakeshi Electric will exhibit at the Space Science and Technology Union Conference to be held in November 2025. ■69th Space Science and Technology Union Conference https://smartconf.jp/content/sstc69/ Dates: November 25 (Tuesday) - November 28 (Friday), 2025 (4 days) The Space Science and Technology Union Conference is a large-scale event where people involved in space, including JAXA, various research institutions, universities, and private companies, gather together. Our company develops electronic sources for small satellites (including impregnated cathodes and LaB6) and manufactures peripheral components such as sensors and power supply units. This time, we plan to expand our display of electronic sources and include additional components such as tantalum and Inconel! In particular, electronic sources like impregnated cathodes are often purchased from overseas due to the limited number of domestic manufacturers, which can lead to difficulties in fine adjustments and flexibility. However, our company offers: ● Control of porosity and selection of emitters ● Manufacturing according to desired sizes and shapes ● Production starting from one unit ● Stable domestic procurement We can provide solutions tailored to your research and development needs! Please feel free to consult with us.

We will introduce an overview of "IATF16949:2016," which is an essential requirement for entering the automotive industry, along with key points considering the current situation of industry trends. In planning for certification of sector standards, we have structured the training content for companies that are gathering information on what to do first and planning to obtain certification. * We have received inquiries from business partners and are struggling to respond. * We are planning to obtain certification but do not fully understand the specific preparations and initiatives required. This seminar is recommended for companies seeking to acquire knowledge and gather information about sector standards.