Exhibited at Smart Sensing 2025.

Compliant with UL standards for refrigeration and freezing equipment, as well as air conditioning units. Supports IP54, suitable for harsh conditions and outdoor applications.

The "SGD43S-M3-Sx" is a refrigerant detection sensor that has obtained UL certification as an RDS (Refrigerant Detection System) and is compatible with applications using A2L refrigerants. With an IP54 rating for dust and water resistance, it demonstrates stable performance even in outdoor or harsh environments. Based on a detection method utilizing thermal conductivity principles, it achieves fast response and long-term stability, while also offering maintenance-free operation with a lifespan of over 15 years, contributing to both safety and cost-effectiveness. 【Product Lineup】 ◎ For HVAC applications: "SGD43S-M3-S5" Supports monitoring of R-454B and R-32 through dual calibration, compliant with UL60355-2-40. ◎ For refrigeration and freezing applications: "SGD43S-M3-S7" Supports monitoring of R-454A, R-454C, and R-455A through triple calibration, compliant with UL60335-2-89. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.

• Other Sensors

Suitable for applications that require compliance with IAQ standards such as RESET!

The "SEN65" is a sensing platform for measuring PM, RH/T, VOC, NOx, and CO2. By combining multiple sensors in a form factor, it can measure up to 9 environmental parameters (PM1, PM2.5, PM4, PM10, T, RH, VOC index, NOx index, CO2). Its innovative design allows for simplified integration, cost reduction, and customization. Additionally, the core of the SEN66 is the new compact MEMS-based particulate matter sensing element, the SPS6x. 【Specifications (partial)】 ■ Mass concentration range: 0 - 1000μg/m3 ■ Standard relative humidity accuracy: 4.5% RH ■ Specified CO2 measurement range: 0 - 40000ppm ■ Accuracy: ±50.0 ■ Sensor output: 0-500 VOC Index *For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment
• Other Sensors

CO2 sensor for indoor air quality applications with a form factor!

The "STCC4" is one of the world's smallest sensors designed for the direct measurement of CO2 gas concentration. It has greatly expanded the new possibilities for CO2 measurement applications that were previously limited by size and cost constraints. This sensor, designed to be seamlessly integrated into compact electronic devices, is a groundbreaking product in the CO2 sensor market. Additionally, this product utilizes a new technology for thermal conductivity sensing, providing the accuracy required for indoor air quality applications with low power consumption. 【Specifications (partial)】 ■ Designated CO2 measurement range: 400 - 5000ppm ■ Accuracy: ±100.0ppm ±10.0% m.v. ■ Supply voltage: 3.3V ■ Average supply current: 850uA ■ Maximum supply current: 5mA *For more details, please refer to the related links or feel free to contact us.

• Gas Detection Sensor

High CO2 accuracy compliant with inclusive building standards! The freedom of design is maximized.

The "SCD43" is a CO2 sensor that achieves class-leading accuracy specifications of ±(30pm + 3% mv). It is also compatible with strict building standards such as ANSI/ASHRAE 62.1-2022 Draft Addendum d, California Title 24, RESET grade B, and the WELL Building Standard (WELL v2). Additionally, it features an extended specified range of up to 5,000ppm and a single-shot operation mode. 【Specifications (partial)】 ■ CO2 output range: 0 - 40000ppm ■ Specified CO2 measurement range: 400 - 5000ppm ■ Accuracy: ±30.0ppm ±3.0% mv ■ Response time (τ63%): 60s *For more details, please download the PDF or feel free to contact us.

• Gas Detection Sensor

High added value, high versatility, up to 40ml/min! Provides excellent chemical resistance and outstanding media compatibility.

The "SLF3S-1300F" is a liquid flow sensor that combines our long-standing excellent track record in low and minimum flow sensing with a thoroughly optimized mechanical design, elevating its already well-established functionality to a higher level in terms of price-to-performance ratio. This sensor provides the highest level of safety, stability, and long-term reliability across a wide range of fields, including diagnostics, analytical equipment, and life sciences. Based on our proven CMOSens Technology, we optimize costs by simplifying the design without compromising fluid, electrical, or mechanical connections. 【Specifications (partial)】 ■ Full-scale flow rate (H2O): 40ml/min ■ Accuracy (H2O): 5% ■ Repeatability (H2O): 0.5% ■ Full-scale flow rate (IPA): 40ml/min ■ Accuracy (IPA): 10% *For more details, please download the PDF or feel free to contact us.

• Flow Sensor

We offer multiple options regarding installation methods, electrical interfaces, and more! They can be customized according to your specifications.

The "SAAF Series" is a fog detection/automatic de-icing sensor that enhances visibility while reducing the energy required for defogging and de-icing the windshield, maximizing passenger comfort and safety. This product is fully calibrated, linearized, and temperature compensated, utilizing the thermal coupling of the windshield to communicate the timing for activating the de-icing mode to the HVAC controller. Please feel free to contact us when you need assistance. 【Features】 ■ Calibrated, linearized, and temperature compensated signals ■ Flexible installation with brackets or tape ■ High durability and reliability with automotive-grade connectors ■ Customer-specific solutions *For more details, please download the PDF or feel free to contact us.

• Sensors

Features: ● Equipped with ARM MediaTek Genio 700 / 510 ● Onboard LPDDR4 8GB ● HDMI 2.0 x 1, DP 1.4 x 1 ● eDP 2 lanes x 1, MIPI-DSI 4 lanes x 1 ● GbE x 1 ● USB 3.0 + 2.0 x 1, USB 2.0 x 5 ● UART x 4, GPIO x 12, MIPI CSI x 2, TPM 2.0 ● Fan-equipped heatsink, heatsink available separately ● Carrier board available separately

Features: ● Equipped with Intel Core Ultra 5 125H/7 155H ● LPDDR5 16GB onboard memory ● NVMe 128GB onboard storage ● eDP x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen2 x 2 ● PCIe 4.0[x1] x 4 ● 2.5GbE x 1 ● COMe Type10 standard, size 84mm x 55mm ● Optional items ECB-920A-0001: Development carrier board NANOCOM-MTU-FAN: CPU fan NANOCOM-MTU-HSP: Heat spreader (Note: Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 9 185H / 7 155H / 5 125H processors ● DDR5 5600MHz Dual Channel SODIMM x2 (up to 96GB) (sold separately) ● VGA switch DDI x1, LVDS colay eDP x1, DDI x2 ● USB 2.0 x8, USB 3.2 Gen 2 x4 ● PCIe [x1] x4, PCIe [x4] x1, PEG [x8] + [x4] + [x4] ● 2.5GbE x1 ● DC 9~16V input ● COM Express Type 6, 3.75 inches x 3.75 inches (95mm x 95mm)

By digitizing contract operations, you can reduce many costs, including stamp duty and mailing fees. ◆ Four Benefits of Electronic Contracts - Cost reduction for printing, stamp duty, mailing fees, and original document storage - Improved business efficiency through system-based sending and stamping - Prevention of tampering with timestamps - Enhanced document searchability 【Many Benefits for the Other Party as Well!】 - Both parties can confirm that the document has not been tampered with - No worry about losing the original paper documents - Increased operational efficiency due to the absence of mailing and binding hassles - Quick contract conclusion through email or system verification ◆ Disadvantages of Electronic Contracts - Costs for implementing and operating the service - Need to ensure that business partners understand electronic transactions ----------------------------------------------------- 　　Consult with paperlogic for electronic contract services! -----------------------------------------------------

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!