[Tax Incentive Eligible] GTMS is registered as productivity-enhancing equipment (software).

Visualize inventory of tools, consumables, and others to reduce direct/indirect costs. Tool management software <GTMS> that can digitize inventory management even with existing shelves.

Guhring has accumulated a track record of implementation around the world with its intelligent tool management software 'GTMS', which is packed with know-how for tool management. The Guhring Tool Management Software, which is the brain behind high performance, can manage not only the inventory in GUHRING cabinets but also the tools stored in existing shelves that you have been using traditionally. Therefore, it can flexibly respond to needs that arise when considering improvements in tool management, such as: - To be honest, I don't feel the necessity to manage all items with an electronic control cabinet. - I want to manage inventory using only existing shelves / I want to use existing shelves in conjunction with GTMS cabinets. - I want to centrally manage inventory that cannot fit into the cabinet, such as large items or long materials. With GTMS, even with such implementation styles, you can break away from analog handwritten ledgers and digitize all inbound and outbound records, allowing for data accumulation, aggregation, and analysis. Of course, you can also utilize various features provided by the software, such as the automatic ordering function to prevent stockouts and recommendations for optimal inventory levels based on usage analysis.

• Other cutting tools
• cabinet
• Other production management systems

By using GTMS, which allows for the digital management of tools, consumables, and other items in bulk, we can improve efficiency, prevent stock shortages and excess inventory, and maintain optimal inventory levels by utilizing automatic ordering.

There are endless concerns related to tools on-site. ● It takes time to find tools. ● The ledger shows they are available, but the actual items are out of stock, preventing processing. ● Even though we should use re-sharpened tools, we end up using new ones, and so on... The GTMS, which can be accurately managed digitally, features "easy operation," "information collection capabilities," "information analysis capabilities," and "information instruction capabilities." By improving tool management, we can enhance on-site efficiency, and the accurate data obtained from this will benefit management departments and executives. Additionally, there is a solution for the "management of inspection instruments," which many users struggle with, addressing both calibration management and inventory management issues all at once. 【Examples of Benefits】 ■ The storage locations for all tools are clear at a glance! ■ Easy and reliable check-in/check-out records with touch panel input! ■ Visualize optimal inventory levels to reduce tool costs! ■ Prevent stockouts with inventory notification and automatic ordering functions! ■ Contributes to increased on-site productivity and factory operating rates! ■ Manage calibration cycles of inspection instruments by serial number! And more... ★ Demonstrations can be conducted while operating the actual machine at the Gühring Nagoya factory. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Not only tools but also the management of inspection instruments is digitized, solving the challenges of calibration management and inventory management all at once with the tool management software <GTMS>.

Guhring has built a track record of implementation around the world with its intelligent tool management software 'GTMS', which is packed with know-how for tool management. The Guhring Tool Management Software, which is the brain behind high performance, also demonstrates significant power in the field of inspection tool management. It is crucial that the calibration of inspection tools is reliably conducted within the deadline, ensuring that the tools in use are always calibrated and capable of measuring accurate values. However, on-site, various challenges, such as those illustrated below, are faced. [Examples of Challenges] ■ Calibration oversights and shortages occur with ledger-based management ■ Uncertainty about whether the inspection tools in use are properly calibrated and traceable ■ Use of inspection tools that have exceeded their calibration deadline, resulting in defective product judgments at delivery points ■ Lack of transparency regarding the location of inspection tools and who is holding them, among others However, by using the solutions provided by GUHRING, the challenges mentioned above can be improved, bringing "certainty" and "transparency" to inspection tool management, as well as resulting in "time-saving effects" by eliminating the time lost searching for the whereabouts of inspection tools.

• Other cutting tools

What is the tool management system that achieved an annual cost reduction of approximately 7 million yen? [Free case study available]

The tool management system 'GTMS' developed by Gooling Japan is a tool issuance system that can fully support the optimization of tool management. In contrast to the tool usage amount, which is always a target for in-house cost reduction measures, indirect tool costs are hidden expenses managed by the tool management system. These costs are difficult to quantify, but they arise through processes such as purchasing and inventory costs, and insufficient management of these processes can be a significant factor leading to increased costs. This document includes actual examples from Europe where an annual cost reduction of approximately 7 million yen was achieved. It is a collection of case studies including user interviews from within Japan. [Contents] - What is the tool management system 'GTMS'? - Effects and case studies of GTMS implementation - Interview - Ishikawa Tool Polishing Co., Ltd. - *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Dear Sir/Madam, I would like to express my congratulations on the continued prosperity of your company. Thank you very much for your exceptional support. We would like to inform you that our company will be closed for winter holidays during the following period. We apologize for any inconvenience this may cause and kindly ask for your understanding. 1. Winter Holiday Period From Thursday, December 28, 2023, to Thursday, January 4, 2024. 2. Business Operations After the Winter Holiday Period We will resume normal operations from Friday, January 5, 2024.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.