Nikkei Industrial News July 2, 2025 Issue / July 8, 2025 Issue / July 17, 2025 Issue / July 23, 2025 Issue Announcement of Advertisements and Articles Published

Non-sticky! Refreshing, smooth mist. Ideal mist fan for heatstroke and static electricity prevention in areas where open flames are prohibited.

**Merits** - Maximum cooling of minus 8 degrees (−8℃) improves work efficiency in high-temperature and high-humidity environments - Continuous operation possible - Safe to use in explosion-proof areas as the power source is air - High water-saving function allows for usage while conserving water - By adjusting the valve opening, it can operate for about 8 hours on 1 liter **Features** - Dedicated container included as a substitute for the tank - Water supply tank compatible with large 10-liter types and servers - Circulator and oscillation function enable wide-area cooling, ventilation, and air blowing - Mist and airflow adjustment with a needle valve - Two types available, 18 type and 24 type, depending on the "site" or "application"

• Oil Mist Collector

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFD-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Desktop type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas as it is powered by air ● Various types and sizes available to suit the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, operates without a lubricator ● Noise reduction of approximately 5% ● Air consumption reduced by 5% * Compared to our conventional products "Features" ● Oscillating function ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in LP gas and underground tank stands, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil refilling is required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFK-18NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Wall-mounted "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from based on usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function ● Equipped with a non-lubricated air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil refilling required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFF-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Floor type "Benefits" ● Long-life motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to match the usage location ● Stepless adjustment of rotation speed using air valve throttling ● Stable construction that is difficult to tip over ● No oil required without a lubricator ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heat stroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0-60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFG-24NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Large 24-inch stand type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed with air valve throttling ● Stable construction, difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-lubricated air motor ● Stable construction, difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Usable in high temperature and humidity (Temperature: 0-60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for LP gas and underground tank areas, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with a non-oil air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from according to the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-oil air motor ● Stable construction that is difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0 to 60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• air conditioning

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.