The product information and catalog for explosion-proof system equipment have been completely renewed!!

We have housed fiber optic photoelectric sensors released by major companies in a pressure-resistant explosion-proof box and obtained labor inspection certification! Accurate detection in hazardous locations is possible!

If the detection location is in an explosion-proof area and the amplifier cannot be placed nearby, there is a method to extend it by ordering a fiber unit, but there are the following disadvantages: 1. If the distance between the detection location and the amplifier is long, the light may attenuate, making accurate detection impossible. 2. There are labor and costs associated with wiring fragile photoelectric tubes over long distances. In such cases, please consider this product. This product houses the power supply and amplifier in a pressure-resistant explosion-proof box and has obtained domestic explosion-proof certification (TIIS), allowing for detection at close range without light attenuation. ■ This is a pressure-resistant explosion-proof type of fiber optic photoelectric sensor that could not be used in hazardous locations before. ■ It can be used for accurate presence detection and for detecting the rotation speed of rotating bodies in explosion-proof areas. ■ Up to three sets of amplifiers and fiber units can be housed. Additionally, by using our pressure-resistant explosion-proof PLC and pressure-resistant explosion-proof CC-Link remote expansion unit in conjunction, it is also possible to build a monitoring and management system that can operate entirely within hazardous locations.

• Sensors
• Distance measuring device
• Optical Measuring Instruments

This is an explosion-proof printer that has obtained labor inspection certification, which is not available from other companies!!

Many cases exist where printers are installed in hazardous locations without obtaining explosion-proof certification, using methods such as air purging. However, this product is a pressure-resistant explosion-proof printer certified by domestic explosion-proof standards (TIIS). *Even products that have received explosion-proof certification overseas, such as IECEx or ATEX, cannot be used in Japan unless they have passed domestic explosion-proof testing. This printer is compatible not only with standard thermal roll paper but also with label-type roll paper and dust-free paper (clean paper). It can print weighing and measurement results on-site in explosion-proof areas, allowing for attachment to products or containers, making it ideal for identifying and ensuring traceability of shipped products. It can print not only text but also barcodes.

• Commercial printers
• label
• Other FA equipment

This is a pressure-resistant explosion-proof multiplexer that is not available from other companies! It can also control multiple devices in explosion-proof areas!

Data can be collected from the serial interfaces (I/F) of numerous connected devices and output to higher-level systems in any format (RS232C/RS422/RS485). When performing data input and output to higher-level DCS/PLC or PCs from many devices installed in hazardous locations (explosion-proof areas), using this product allows for the consolidation of wiring, enabling communication with safe areas through a single wire, significantly reducing wiring and piping costs. *Electrical equipment used in hazardous locations must have domestic explosion-proof certification in Japan, even if it has overseas explosion-proof certification such as IECEx or ATEX. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas.

• controller
• Other FA equipment
• Other network tools

Ideal for expanding PLC I/O (input/output) in hazardous locations (explosion-proof areas)!

By housing the CC-Link remote I/O unit in a pressure-resistant explosion-proof box, it is possible to accommodate not only signal input/output expansion units but also analog input/output expansion units. Therefore, when combined with our pressure-resistant explosion-proof PLCs and pressure-resistant explosion-proof fiber optic sensors, it becomes easy to build monitoring and management systems for various measuring devices that can be completed solely within explosion-proof areas. ■ CC-Link I/O (input/output) expansion units with domestic explosion-proof certification that are not available from other companies ■ Changeable input/output point counts by swapping units

• Other process controls
• controller
• Other FA equipment

It is possible to achieve low-cost control of peripheral devices and data collection in hazardous locations (explosion-proof areas)! This contributes to the explosion-proofing of control panels!

We have housed the MELSEC Q series sequencer in a pressure-resistant explosion-proof box and obtained domestic explosion-proof certification. Electrical equipment used in hazardous locations, even if certified for explosion-proof use overseas such as IECEx or ATEX, cannot be used in Japan without undergoing domestic explosion-proof testing. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas. If the power supply ratings and other standards are met, it is possible to replace units from the Q series that are not standard. It is ideal for replacing conventional air purge panels and similar equipment. Since it can control external devices such as solenoid valves in hazardous locations, replacing the control unit of existing equipment with this product makes it easier to achieve explosion-proof compliance. Additionally, it can accept inputs from sensors and measuring instruments, allowing for easy construction of data collection systems in hazardous locations. When combined with our product, the "Pressure-Resistant Explosion-Proof CC-Link Remote I/O Expansion Unit," it is also possible to expand the number of signal I/O and analog I/O points, enabling the construction of data collection and signal monitoring systems in hazardous locations. [Related Products] Pressure-Resistant Explosion-Proof CC-Link Remote I/O Unit Pressure-Resistant Explosion-Proof Fiber Optic Photoelectric Sensor

• PLC
• controller
• Display

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "24 Tissue Tubes 3.0ml Type" features a wide inner diameter of 13.4mm at the mouth, a low height of 25.9mm, and a flat bottom design, making it easy to insert and remove samples. Each tube is equipped with a 2D code on the bottom, allowing for efficient sample information management by using a 2D scanner to reflect the code in a PC database. Additionally, it is compatible with automated systems due to its SBS format. 【Features】 ■ Easy insertion and removal of samples ■ Particularly suitable for tissue/cell samples measuring 5mm to 7mm ■ Using our dedicated rack for 24 tubes allows for bulk reading of the 2D codes on the tube bottoms ■ Compatible with automated systems due to its SBS format ■ Made of polypropylene, autoclavable, and compatible with DMSO *For more details, please refer to the related links or feel free to contact us.

■Disadvantages of Conventional Antistatic Fluororesin Coatings - Requires high-temperature firing (around 400°C) - Applicable only to metals - Limited color options - Low mechanical strength ■Features of Safron LF+ - Can be processed at low temperatures (below 100°C) - Applicable to metals and resins - Color variations available - High friction coefficient and mechanical strength - Antistatic performance is equivalent to conventional Safron For more details, please check the product site.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.