We will be exhibiting at the 42nd Japan Shop 2013 General Store Exhibition.

A compact type DVI transmitter that can extend DVI-D signals with a single LAN cable (no external power required)! Easy wiring and connection!

DVI Signal CAT5e Transmitter Compact Type - Transmits DVI-D (single link) over a single CAT5e/6/7 cable. *CAT6 or higher cables are recommended. - Maximum transmission distance is 50m for 1920x1200 and 70m for 1024x768. *For longer distances, the DVI-D long-distance transmitter DE02E (HDCP compatible) can transmit up to 100m. - Set includes DE01ET (PC side) and DE01ER (monitor side). - Both ends of the transmission cable use RJ45, allowing the use of commercially available LAN cables (straight wiring). - No external power supply required. *It operates on power supplied from the DVI port of the video output device, but depending on the connected device, the available power may be insufficient, resulting in a shorter transmission distance. In this case, connect using a USB to micro USB cable (sold separately) or connect a DC5V power adapter SWP051000-1S-PSE (sold separately) or LTE10UW-S1-BS33 (sold separately) to the included micro USB conversion cable.

• Image Transmission Equipment
• Other security and surveillance systems
• Other PCs and OA equipment

HE01S transmits HDMI signals up to 40m (1080p) via LAN cable!

The HDMI CAT5e transmitter HE01S transmits 1080p video over LAN cables up to 40m (60m for 720P/1080i). It is ideal for transmitting video to large monitors, signage displays, and projectors located away from the equipment. Since LAN cables can be used for transmission, wiring is easy. Just connect the RJ45 connector and the transmitter after wiring, and you're done!

• Image Transmission Equipment
• Other security and surveillance systems
• others

4K compatible long-distance transmitter HE02E that can transmit HDMI signals up to 100 meters using LAN cables!

The HE02E transmits HDMI signals over LAN cables up to 100 meters. It can connect game consoles and Blu-ray players to AV amplifiers/HD TVs located at a distance. - Transmits HDMI over CAT5e/6/6a/7 UTP/STP cables up to 100 meters (CAT6 or higher recommended) - Includes HE02ET (transmitter), HE02ER (receiver), and power adapter - Both ends of the transmission cable can use commercially available LAN cables (straight wiring) with RJ45 connectors - Supports HDMI 1.4, capable of transmitting 3D and 4K at 30Hz - Compatible with HDCP 2.2/1.4 - Compliant with HDBaseT * Please use CAT6 or higher cables when displaying video at 1080p 60Hz or higher. * If utilizing the transmission performance of HDMI 1.4 (10.2Gbps), please use CAT6a or higher cables.

• Other security and surveillance systems
• Other PCs and OA equipment
• others

VH01 that converts VGA (analog RGB) and stereo audio (LINE) or digital audio (S/PDIF coaxial) to HDMI!

VGA/Analog/Digital Audio to HDMI Converter - Converts VGA (Analog RGB) and stereo audio (LINE) or digital audio (S/PDIF coaxial) to HDMI - Supported resolutions: 640x480, 800x600, 1024x768, 1280x960, 1280x1024, 1360x768, 1440x900, 1600x1200, 1920x1080 - Equipped with loop output for video/audio signals before conversion - Digital audio supports only 48k 16bit LPCM - Connection ports: VGA: Mini D-sub 15 female, Power: DC jack (Φ2.1✕5.5mm), Analog audio: Stereo mini jack, HDMI: Type A, S/PDIF coaxial: RCA female, S/PDIF optical: square - Power adapter included

• Other image-related equipment
• Other security and surveillance systems
• others

An effective HDMI 4-port switcher for switching multiple (up to 4 systems) HDMI signals for monitor display!

HS04 is an HDMI 4-port switcher that switches between four connected HDMI sources to one output. - Maximum resolution is 1920✕1200 or 1080p - Supports both video and audio signals - Compatible with HDMI 1.3a and HDCP - Includes power adapter and infrared remote control

• Other PCs and OA equipment

Surge protector SP007 compatible with SD/HD/3G-SDI video signals transmitted via coaxial cable!

- It blocks surges that occur in SD/HD/3G-SDI video signals (BNC connection). - It protects equipment from sudden voltage spikes caused by high-voltage surges such as induced lightning. - It can also be used with analog cameras and TV/CATV antenna cables. - With BNC male on one end and BNC female on the other, it can be easily installed into existing wiring. - It allows voltages below DC24V to pass through.

• Other security and surveillance systems
• Other safety equipment
• others

Converter SDI01 that converts SD/HD/3G-SDI signals received via coaxial cable to HDMI! (Also equipped with repeater function)

This is a converter that converts SD-SDI/HD-SDI/3G-SDI signals transmitted via coaxial cable to HDMI (supports resolutions of 720p, 1080i, and 1080p). • Active through output function included In addition to HDMI output, active through output is possible. The SDI signal output can also be further extended due to the active through feature. • Embedded audio support It supports embedded audio, allowing video and audio to be transmitted together. 【Transmission distance guidelines (using 5C-FB)】 - SD-SDI (SMTP 259M 270Mbps): up to 300m - HD-SDI (SMTP 292M 1.45Gbps): up to 150m - 3G-SDI (SMTP 424M 2.97Gbps): up to 80m

• Other image-related equipment
• Other security and surveillance systems
• others

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.