We have renewed our website.

“The paper is as slippery as a banana peel, allowing for adjustments of a few centimeters. With a friction coefficient of 0.02 to 0.03, it is easy to move heavy objects!”

The "Suberun Paper" is a sliding paper designed for precise positioning adjustments of heavy objects, such as large machinery, by allowing them to be easily slid in any direction when laid down in layers. ◇ Three types: Compact roll type "SB-A30R" Wide roll type "SB-A50R" Sheet type that requires no cutting "SB-A20" Generally, "slipping = danger," but with some ingenuity, "slipping = convenience." Please use it with safety as the top priority. 【Features】 ■ The weight for fine adjustments is under 10 tons ■ The adjustment range is within 100mm *If the ground surface is uneven, it may not slide effectively. (Please lay down a flat surface, such as steel plates, for use.) It is not suitable for long-distance movement. Since it is placed under heavy objects, jacks or similar equipment will be necessary.

• Other consumables

You can make "fine adjustments of a few centimeters" on paper that slides like on ice.

The "Suberun Paper" is a sliding paper designed for precise positioning adjustments of heavy objects, such as large machinery, by placing it underneath and allowing the objects to glide smoothly in any direction for easy fine-tuning. Features of the double-sided type (SB-WR): 1. It can be used without worrying about which side is up, making setup easy. 2. Even if it has a tendency to curl, it can be used on either side, making it user-friendly. 3. When you want to slide more, you can increase the number of sheets in pairs or sets (two sheets per set) if using a single-sided paper, but with double-sided sliding, you can add three or four sheets without worrying about pairs. (Since both sides slide, fewer sheets are needed.) ◇ Three types: Compact roll type "SB-WR30R" Wide roll type "SB-WR50R" Sheet type that requires no cutting "SB-WR40" 【Features】 ■ Fine adjustment weight is under 10 tons ■ Fine adjustment range is within 100mm *If the surface is uneven, it may not slide well. (Please lay down a flat surface, such as a steel plate, for use.) It is not suitable for long-distance movement. Since it is placed under heavy objects, jacks or similar equipment will be necessary.

• Other consumables

It is a paper that slips like a banana peel (dust-free type), allowing for "fine adjustments of a few centimeters" in a clean room.

The "Suberun Paper" is a sliding paper designed for precise positioning adjustments of heavy objects, such as large machinery, by allowing them to be easily slid in any direction when layered underneath. It enables simple fine-tuning of placement. This is a dust-free paper type suitable for clean rooms. While "slipping" is generally associated with danger, with some ingenuity, it can become "convenient." Please use it with safety as the top priority. 【Features】 ■ Fine adjustment weight is under 10 tons ■ Fine adjustment range is within 100mm *If the ground surface is uneven, it may not slide effectively. (Please lay down a flat surface, such as a steel plate, for use.) It is not suitable for long-distance movement. Since it is placed under heavy objects, jacks or similar equipment will be necessary.

• Other consumables

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.