We will be exhibiting at the Measuring Technology Expo 2025.

A 3D scanner that can perform 3D scanning in color.

SMARTTECH3D CobotScan is an automation solution that establishes accurate reports on the details of shapes and quality inspections by comparing the actual state of an object with its CAD model. It guarantees the best performance through highly developed cutting-edge technology. By adding a white light source, it also enables realistic shape reconstruction in full color reproduction of the object's color. CobotScan is a 3D scanner designed and optimized for measurements using integration with robots and rotating stage modules. The scanning head, equipped with a stereo camera system, is lightweight due to its special design, ensuring high-quality mapping even for complex shapes.

• Other CAD related software

The Visi series is a high-contrast inspection lighting solution that utilizes LuxiBright(R) technology.

Visi Series – Innovative Lighting for High Contrast Inspection The Visi Series is a high contrast inspection lighting solution that utilizes LuxiBright® technology. It is ideal for detailed inspections under a microscope, providing uniform light without shadows from lasers, significantly improving inspection accuracy.

• Other lighting equipment

Display the estimated leak amount and cost on the screen for immediate verification! An ultrasonic camera that also shows CO2 emissions.

The Fluke ii905 industrial ultrasonic camera is equipped with 64 microphones and has a wide field of view, allowing maintenance personnel to quickly and accurately detect compressed air, gas, and vacuum leak points even in noisy environments. The 7-inch LCD touchscreen overlays SoundMapTM with visible images, enabling quick identification of leak locations. Its simple and intuitive interface allows for the removal of background noise and the separation of leak sound frequencies. Even during peak operational times, the entire factory can be inspected in just a few hours. The ii905 quickly and easily identifies areas needing air leak repairs, helping to maintain operational efficiency and reduce utility costs. Images can be saved and exported for report creation. No longer will air leaks be left unattended.

• Color camera
• Surveillance Camera System

Shape measurement of shafts can be done with a single chuck! Measurement and data collection completed in 30 to 60 seconds. Special shapes are also acceptable.

Our company handles non-contact shaft shape measuring machines manufactured by VICIVISION in Italy. By illuminating the workpiece set inside the machine with LED light and reading the shadow of the workpiece with a CCD sensor on the opposite side, we can measure dimensions and shapes. Various items can be measured with a single chuck, significantly contributing to a reduction in work time. This is recommended not only for sites struggling with measurement time and variability but also for those considering automation with robots. 【Product Lineup】 Techno Series: Compatible with workpieces up to a maximum diameter of 180 mm and a maximum length of 2000 mm. High-precision model Prima Series: Compatible with workpieces up to a maximum diameter of 140 mm and a maximum length of 600 mm. Standard model X Series: High-precision model for small workpieces such as medical implants and watch parts. *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

• Other measurement, recording and measuring instruments

Easily and precisely measure various gears such as those used in automobiles, aerospace, power generation, railways, construction, and agricultural machinery!

The GT series is designed to meet the high precision requirements in gear measurement technology accurately, easily, and quickly.

• Other inspection equipment and devices

We measure cylindrical workpieces at high speed and high precision without contact. Optionally, a touch sensor or confocal sensor can be selected for installation.

The optical shaft shape measuring machine Techno series manufactured by VICIVICION in Italy has a diverse product lineup, allowing customers to select the most suitable model according to their needs. Direct dimension management on-site: Workpieces produced by CNC lathes and grinding machines can be measured in just a few seconds. Supports small lots of various types: This machine allows for easy setup changes, enabling a very quick switch to the next batch. One measuring machine for multiple processing machines: Due to the short measurement time, one measuring machine can accommodate multiple processing machines. High resolution: Captures ultra-high resolution images of even the smallest details. Touch sensor: Areas that cannot be measured optically can be measured with the optional touch sensor. Confocal sensor: Spline measurements can also be performed non-contact and at high speed using the optional confocal sensor. *For more details, please refer to the PDF document or feel free to contact us.

• Optical Measuring Instruments

High resolution allows for measurement of extremely small details. One device supports various measurement items. Demo measurements available.

Our company handles the optical shaft shape measuring machines from VICIVISION, which can measure cylindrical workpieces quickly and accurately without contact. We offer a lineup including the 'X Series', specialized for medical implants, watch parts, and micro-mechanics, as well as the 'Prima Series', which can measure workpieces produced by CNC lathes and grinding machines on-site with just one machine. Measurements can be performed in a short time, contributing to improved work efficiency. Free demo measurements are also available at our Shibuya Technical Office. 【Product Lineup】 ◎ 'X Series' For fine measurement of small workpieces such as medical implants and watch parts. ◎ 'Prima Series' Offers excellent cost performance. For measuring turned workpieces. ◎ 'Techno Series' Has a resolution approximately twice that of the Prima Series. Capable of automation in production environments. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Food Testing/Analysis/Measuring Equipment

The HDA measurement device comprehensively analyzes the characteristics of the injector!

The company MEHWALD was established in 1973 by Mr. Ralph Mehwald and entered into a licensing agreement with Robert Bosch in 1990 regarding the testing of components for diesel injection systems, starting the sale of Bosch injection test benches. In 1999, it became part of the Bosch Group and is the only company within the Bosch Group that can sell test benches for injection systems using Bosch's testing and measurement technology. Additionally, it also handles test benches for gasoline. In recent years, it has also been developing measurement devices for fuel cells.

• Testing Equipment and Devices

Even on surfaces with high reflectivity, which optical methods struggle with, it is possible to apply and measure!

The CORE-S series is a 5-axis non-contact three-dimensional measuring machine. It can measure at nearly four times the speed of conventional contact-type three-dimensional measuring machines, and even on surfaces with high reflectivity, which optical systems struggle with, it can measure shapes without any coating, and of course, no markings are required. It is ideal for measuring small turbine blades, medical implants, and parts with characteristics such as reflective surfaces and sharp edges. The operation is very simple; just clamp the object to be measured and press a button to start non-contact measurement. The optical sensor enables the measurement of parts with complex geometries and serves as a solution that replaces multi-point measurements using gauges. To allow for the measurement of complex shapes, it is capable of simultaneous 5-axis operation, significantly reducing measurement time compared to contact measuring machines.

• 3D measuring device
• Optical Measuring Instruments

VICIVISION measures cylindrical workpieces non-contactly with high speed and high precision.

The optical shaft shape measuring machine Prima series from Italian company VICIVICION offers a diverse product lineup, allowing customers to select the best model to meet their needs. Direct dimension management on-site: Workpieces manufactured on CNC lathes and grinding machines can be measured in just a few seconds. Supports small lots of various types: This machine allows for easy setup changes, enabling a very quick switch to the next batch. One measuring machine can accommodate multiple processing machines: Due to the short measurement time, one measuring machine can support multiple processing machines. *For more details, please refer to the PDF document or feel free to contact us.

• Drive system parts

The can lid anchor and curl end measurement can be measured without changing the mold!

The Versatile Technology automatic shell measuring machine can measure anchors and curl ends with diameters ranging from 200 to 206 (209 diameter is optional) without changing the mold. The measurement items include curl height, countersink, unit height, panel depth, curl opening, and curl diameter (inner and outer diameter). An automatic detection function for the rolling direction is standard equipment.

• Other inspection equipment and devices

It is possible to measure the maximum, minimum, and average values of can height and plate thickness, as well as the depth of the can bottom!

The automatic front-end measuring machine manufactured by Versatile Technology can measure the height of cans, maximum, minimum, and average thickness, as well as the depth of the can bottom, by performing a 360º automatic scan. The measurement results are displayed in real-time on a liquid crystal touch panel. Continuous vertical measurement of thickness allows for the acquisition of thickness distribution. The cans that can be measured include trim cans (lubricant cans) and cups with diameters of 202, 204, 206, and 211, and heights ranging from 250ml to 610ml. No mold change is necessary.

• Other inspection equipment and devices

It is possible to measure the thickness of the varnish and the distribution of the coating thickness while ignoring the ink from the state of ink + varnish.

Versatile Technology's automatic film thickness measurement device adopts the probe from SpecMetrix in the United States, allowing for the measurement of varnish thickness and film thickness distribution while ignoring the ink, starting from a state of ink + varnish (foam ink is also possible). 360° scanning is conducted using a non-contact probe. It also accommodates film thickness on rim-coated surfaces. The cans that can be measured include standard cans with diameters of 202, 204, 206, and 211, and no mold change is necessary.

• Other inspection equipment and devices

It is possible to detect the enamel exposure amount of standard cans and trim cans!

Versatile Technology's automatic enamel meter can detect the enamel exposure of standard cans and trim cans. It accommodates cans of any height without the need for change parts. The measurement time is approximately 20-30 seconds per can.

• Other inspection equipment and devices

VICIVISION is the optimal solution for measuring extremely small details without contact.

The Italian company VICIVICION manufactures the optical shaft shape measuring machine X series, which offers a diverse product lineup, allowing customers to select the optimal model to meet their needs. The X series is a measuring device specifically designed for micro-mechanics, focusing on medical implants, watch components, and more. It is ideal for measuring ultra-small diameter parts. The X series, with its high resolution, can measure even the tiniest details and is specially designed for measuring dental implants, medical components, watch parts, and ultra-small mechanical parts. It has received positive feedback from those handling ultra-small diameter parts. The open design structure allows for easy access and handling of even the smallest and most complex cylindrical workpieces. The fixed structure and movable optical unit prevent vibrations and drops during measurement. Since the machine has no openings or undercuts, there is no risk of small workpieces falling during measurement. *For more details, please refer to the PDF document or feel free to contact us.

• shaft
• Distance measuring device

Support for all screw standards! Automated calibration measurement device.

The probe with two styluses performs sequential scanning on the work surface. Notably, the actual shape of each of the two styluses is automatically mapped in multiple directions to optimize the probing system. High-resolution measurements are taken at a rate of 12,000 times per second during scanning and are stored in computer memory. After scanning the initial contour, the measurement force reverses, and the probe scans the opposite side of the gauge. Each measurement point has a resolution of 0.01μm in both axes.

• Other inspection equipment and devices

Highly dynamic online measurement of composite gas mixtures in combustion engines is possible!

The German company Lubricens offers a highly efficient multifunctional tool used in research and development by engine developers, parts manufacturers, and contract measurement companies. It allows for online monitoring of engines while they are running. It can also be used for dynamic engine testing that simulates actual operating conditions. It provides oil discharge quantities for all actions, such as acceleration and braking at various timings, with millisecond accuracy. 【Features】 ■ Very fast detection ■ Very low detection limit ■ Multifunctional ■ No tracer required ■ Usable in real-time *For more details, please refer to the PDF materials or feel free to contact us.

• Analytical Equipment and Devices

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X

This year, Toyota Kikan will exhibit at the Toyota Business Fair. We will introduce products that are useful for heatstroke prevention and more. Our top recommendation is SPACECOOL. Please feel free to visit our booth! SPACECOOL is an "eco-friendly cooling solution" essential for the future of our planet's environment! Be sure to check it out. Also, take a look at the basic knowledge for heat prevention in factories moving forward.

In the operation of drawings, do you face challenges such as "taking too long to find," "uncertainty about whether it's the latest version," or "high likelihood of confirmation errors"? By utilizing CADSUPER's barcode function (optional), you can reliably connect drawings and information, allowing for a smooth advancement of DX in drawing utilization. In this seminar, we will introduce how using barcodes can change: - Drawing management and search - Confirmation and cross-checking tasks - Information collaboration with the field This content is recommended not only for existing users but also for those considering improving the efficiency of drawing operations and reducing errors.

Daitō Shikō Co., Ltd. will be exhibiting at the "International Fire and Disaster Prevention Exhibition" held at Shirakawa Park in Nagoya City, Aichi Prefecture, from Thursday, May 28, 2026. At the exhibition venue, we plan to showcase goods that are perfect for fire prevention events and recruitment activities for members. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

[Speaker] Miho Ko Shimada, Partner Attorney, Mori Hamada & Matsumoto Law Firm, Foreign Law Joint Enterprise [Key Lecture Content] The movement towards the implementation of CCS, which is positioned as an essential technology for decarbonizing hard-to-abate industries, is gaining momentum in Japan. Among the "advanced CCS projects" selected for business commencement in the early 2030s, some pipeline projects have progressed to the exploratory drilling stage. For shipping transport projects, discussions are underway to create mechanisms for clustering CO2 sources and improving shipping transport efficiency. In this seminar, following the full enforcement of the CCS Business Act on May 22, we will organize the current state of the business environment related to CCS and examine the latest discussions at the Agency for Natural Resources and Energy and the Ministry of the Environment (based on information available at the time of the event) from a legal perspective as we consider the shape of CCS projects leading to Final Investment Decision (FID). [Lecture Items] 1. Current state of the business environment related to CCS 2. Overview of the CCS Business Act 3. Overview of the cost difference support system for CCS projects (pipelines) 4. Structural considerations through the CCS value chain 5. Q&A / Business card exchange