Achieve pellet-based modeling in a tabletop size!

"Tumaker" is a desktop-sized FGF method 3D printer that uses pellets as its material. *Demonstration available.

"Tumaker" is a desktop-sized FGF (Fused Granular Fabrication) 3D printer that uses pellets as its material. It can be utilized for material research and development. [Features] ■ Adoption of IDEX printing head It employs the IDEX (Independent Dual Extruder) system, where two printing heads operate independently. You can use just one head, or combine both heads to enable various types of fabrication. The dual-head system allows you to choose from two types of materials: pellets and filaments, which can be freely combined. ■ High positioning accuracy in the drive components It features high positioning accuracy with low-vibration stepping motors and drivers. The precise and smooth operation of the printing head ensures stable fabrication throughout the process. ■ High-temperature equipment for various materials With a nozzle that heats up to 300°C and a table that can reach 100°C, it supports a wide range of materials. Being an open material system, you can freely choose from general-purpose materials, original materials, and recycled pellets, among others. *For more details, please request a catalog or view the PDF data from the download button below.

• plastic
• 3D Printer

Automatically replenish pellet materials!? Tumaker NX 300/BigFoot 500 Modular "Pellet Feeder"

The 3D printer "Tumaker NX 300 modular/BigFoot 500 Modular" is compact yet capable of 3D printing using pellet materials. We have received numerous inquiries from those wanting to try various materials! This 3D printer allows you to easily start printing by simply loading the material into the hopper, but the storage capacity is about 0.3L. Therefore, when performing long-duration prints, it is necessary to manually refill the material. Some of you might be wondering, "Do I have to refill the material every time I print?" or "I'm worried about when the material will run out..." That's why we are introducing the optional "Pellet Feeder." By switching to the hopper for the feeder, it can detect the remaining amount during printing and automatically supply pellets! The documentation provides a detailed explanation of how the material supply system works, so please take a look. *You can download the documentation using the button below.

• 3D Printer

3D Printing with Pellets on Your Desktop! Explaining the Amazing Features of the "Tumaker NX・BIGFoot Series" Print Head | System Create

Marsugo is a document that picks up the functions and features of various products and introduces the "amazing!" aspects. 3D printers that can create shapes using pellet materials are gaining attention. However, due to structural limitations, most of them are large in size... Have you ever thought that it would be more convenient if there were smaller printers available? Introducing the newly launched desktop 3D printer "Tumaker NX Pro・BIGFoot Pro series," which can use both pellet and filament materials. To set up the materials, simply load the pellet material into the hopper. After that, you can use it with a user experience that is almost the same as a typical FDM 3D printer. In this document, we provide a detailed explanation of the unique structure and mechanism of the print head that enables stable printing with pellets, so please take a look. *You can download the document using the button below.

• plastic
• 3D Printer

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

On November 6th (Thursday) to 7th (Friday), 2025, we held the "Human Body Day 2025" at the NAC Image Technology Akasaka Multi-Purpose Space. We have uploaded videos of the highlights from each company and the presentations that took place on the day to our website. We encourage you to take a look. ---[Report on Human Body Day 2025 is here]------------------- https://info.nacinc.jp/jintaiday2025-report ------------------------------------------------------------------------- On the day of the event, participants were able to experience a wide range of products in a hands-on session format, including motion capture, force plates, eye tracking, and human body analysis software. We received numerous comments from attendees expressing high satisfaction, saying, "It was great to gain various information all at once," which makes us very happy. NAC Image Technology will continue to provide "valuable products to our customers." We hope you will join us for our next event as well.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed