Exhibition Information: High-Performance Materials Week - 1st Recycling Tech Japan

[New Product] A small-scale down version of the CURUPO continuous rotary filter machine, leveraging the concept of commercial-scale.

The mini CURUPO is a bench-scale continuous filtration machine characterized by "liquid supply through top charging." Despite its small size, it automatically performs a complete filtration cycle from filtration to cake removal seamlessly within a casing that excels in airtightness. The continuous production process validated with small sample sizes can be directly applied to the commercial-scale CURUPO, allowing for a smooth scale-up from clinical trials and sample provision stages to mass production. The attached document introduces the following contents: - Mechanical overview and features - Lineup of the CURUPO series - Typical flow - Introduction to simplified structure, etc. Please download and check it out! *CURUPO is a registered trademark of Mitsubishi Kakoki.

• Testing Equipment and Devices
• Filtration Equipment

Newly Developed" Bench Scale, capable of performing the same processing operations as the actual machine even with a small sample! We realize our customers' desire for "this is the filtration machine I wanted!

The "Small Filtration Dryer" is a bench-scale horizontal plate filter. It is equipped with paddle-type stirring blades inside a sealed filtration chamber. Although it is a small machine with a filtration chamber capacity of 3L, it can consistently perform all processes from filtration to cake washing, liquid removal, and vented drying, just like a commercial-level machine. 《Recommended for the following people!》 ■ Want to experiment with a small sample ■ Want to prototype products in the kilogram range ■ Want to investigate various operating conditions ■ Want to shorten the time for sample prototyping ■ Want to consider operating conditions for samples that require exposure measures *The reasons for the recommendations are detailed in the attached document. Please download it for confirmation.

• Drying Equipment
• Separation device
• Mixer/agitator

Explosion-proof! Separation, cleaning, and solvent replacement of nanoparticle slurry all in one machine. Available in a benchtop size for research and development.

The "Mitsubishi DynaFilter (DyF)" is a rotary ceramic membrane filtration device that precisely separates nano-sized fine particle slurries, allowing for the recovery of high-concentration concentrated liquid and clear filtrate. By rotating the disk, it suppresses the formation of a cake layer that causes filtration issues, maintaining high processing capacity. It can perform cleaning of concentrated slurries (impurity removal) and solvent replacement, and due to its explosion-proof design, it can handle slurries containing organic solvents. 【Features】 ■ Offers a tabletop type that is among the smallest in the industry ■ Supports small sample sizes ■ Filters difficult-to-filter slurries with high efficiency ■ Can concentrate without contamination to a high degree ■ Explosion-proof design accommodates a wide range of solvents *For more details, please refer to the PDF document or feel free to contact us.

• Concentration Equipment

Continuous rotary filter compatible with vacuum filtration and pressure filtration. One-stop support from lab tests to actual equipment delivery! Contributes to improved liquid removal rates and equipment miniaturization!

The "Mitsubishi Blowback Filter (BBF)" is a continuous rotary filtration machine that performs filtration, dewatering, cake washing, cake dislodging, and cloth washing in a continuous manner. It can accommodate both vacuum filtration and pressure filtration, allowing you to select filtration conditions tailored to your needs. 【Features】 ■ It can be used for pressure filtration and vacuum filtration across a wide range of particle sizes. ■ It is easy to implement sealing and explosion-proof measures, making it suitable for filtering, separating, washing cakes, and dewatering substances containing solvents or under high temperature and pressure conditions. ■ It operates at low speeds of a few rotations per minute, ensuring stable operation. This facilitates easy operational and maintenance management, leading to significant labor savings. ■ By adopting a unique technology called spot blow, the flow rate of the filtrate and cleaning liquid passing through the filtrate pipe is increased, allowing for a higher drum rotation speed compared to conventional drum filters (Oliver filters), which improves dewatering rates and enables downsizing of the equipment. ■ If enhanced cleaning effects are desired, the cleaning process can be extended. Recovery of the cleaning liquid is also possible. ■ We can propose filtration areas ranging from 0.25 m² to 70 m², tailored to the required processing volume. *For more details, please refer to the PDF materials or feel free to contact us.

• centrifuge
• Separation device
• Mixer/agitator

With over 300 units sold, we solve the issues of streamlining processes, consolidating existing equipment, improving processing efficiency, and reducing hazardous work through 'automation'!

The "Mitsubishi Schneider Filter" is a pressurized filtration machine that stacks horizontal filter plates in an upward direction. Since it is not affected by gravity during processing, it exhibits stable filtration capabilities without bias in the cake layer or inconsistencies in washing and drying. Additionally, the cleaning and replacement of filter media (filter paper or filter cloth) after filtration preparation and completion can be automated. 《Recommended for the following people!》 ■ Those who want to reduce the workload of operators ■ Those who want to improve operational procedures that may lead to operator errors ■ Those who want to consolidate multiple production lines ■ Those who want to reduce human involvement in operations that pose risks to operators ■ Those who want to improve the processing of difficult-to-filter materials ■ Those who want to eliminate variations in quality The attached materials provide clear examples of proposals tailored to specific concerns, illustrated with photos and illustrations. Please download and check it out!

• Solid-liquid separation filter
• Filtration Equipment

For wet centrifugal classification/separation! It is possible to separate (concentrate, remove) submicron particles in a short time.

The "Mitsubishi Disc Separator" is a disc-type centrifuge with a proven sales record of over 100,000 units. Thanks to its powerful centrifugal force and the interaction with the built-in separation plates, it can quickly separate and remove submicron particles from the raw material slurry. By applying this separation technology and adjusting the supply flow rate to the disc separator, it can be used in wet classification and purification processes to change the captured particle size. 【Features】 ■ Explosion-proof options available ■ Continuous processing without stopping rotation - Fine particles (along with liquid): Continuously discharged from the impeller - Coarse particles: Automatically discharged intermittently from the discharge port ■ Equipped with a cooling jacket to minimize temperature changes in the processing liquid *For more details, please refer to the PDF document or feel free to contact us.

• centrifuge
• Concentration Equipment
• Separation device

Our company will be exhibiting at "IIFES 2025," which will be held at Tokyo Big Sight from November 19 (Wednesday) to November 21 (Friday), 2025. We will showcase a remote monitoring solution that can visualize the energy of factories and equipment in a "quick, easy, and compact" manner with actual devices. This exhibition will take place in the partner exhibition space within the GUGEN booth. 【Main Exhibited Products】 - Gateway BOX An IoT gateway compatible with Modbus that enables the visualization of energy in factories and equipment in a "quick, easy, and compact" manner. - PAL-Plus typeE2 We will introduce a "smart" clamp CT that can measure simple electric power for three-phase three-wire and single-phase three-wire systems. - PAL-Plus typeE A Modbus-compatible clamp CT that can easily be installed in narrow spaces and measures simple electric power for single-phase two-wire and three-phase three-wire systems. - PAL-Temp A compact, easy, and quick-to-install Modbus-compatible temperature and humidity sensor. We sincerely look forward to your visit.

We are pleased to announce that JP Generators Co., Ltd. will be exhibiting at the 46th Joint Disaster Prevention Drill of the Nine Prefectures and Cities, which will be held on November 9, 2025 (Sunday) at the Kanagawa venue of "Big Rescue Kanagawa." About "Big Rescue Kanagawa": Big Rescue Kanagawa is a practical comprehensive disaster prevention drill focused on medical rescue activities, conducted in cooperation with the prefecture and Miura City, along with medical and disaster prevention organizations. In addition to rescue training, we have prepared many enjoyable areas where you can learn about disaster prevention, including exhibitions and hands-on experience corners. We encourage everyone to participate! Our exhibited product will be the "Vehicle-mounted Generator | G-STREAM." We sincerely look forward to your visit.

Nitto Kohki will hold the "2024 Attack Fair in Ichihara" at the "Yume Hall" for two days from December 11 (Wednesday) to December 12 (Thursday), 2024. The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for visitors and many fun activities prepared. We look forward to welcoming everyone!

Toa DKK will exhibit at the "Hiroshima Waterworks Exhibition 2025" held from October 29 (Wednesday) to October 31 (Friday). Venue: Hiroshima Gate Park ◎ For simple measurements and continuous monitoring in environmental conservation sites ◎ ◎ For water quality analysis operations at water purification plants ◎ We will showcase our products centered around our company and HACH's water quality analyzers. Toa DKK Booth No. 126 <Main Exhibited Products> - Automatic water quality measurement device for tap water - Turbidity meter - Pocket residual chlorine meter - Desktop turbidity meter / Portable turbidity meter - Portable heavy metal analyzer Pre-registration can be done from the official website. https://suidoten.jp/2025/ >> We look forward to your visit! <<

We would like to inform you that we will be exhibiting products at the 46th Symposium on Biomembranes and Drug Interactions. If you are planning to attend, please feel free to stop by. ❚ Products to be Exhibited - Automated Patch Clamp System | Port-a-Patch mini This compact system eliminates the need for a microscope, vibration isolation table, manipulator, and Faraday cage, which are typically required for conventional patch clamp experiments. It allows for easy data acquisition and verification without the need for specialized skills or experience. - Liposome Preparation Device | Vesicle Prep Pro This is the world's first device capable of producing giant unilamellar vesicles (GUVs) with diameters ranging from 1 to 30 μm using the electroformation method (vibrating hydrated lipid films in an alternating electric field) without the use of organic solvents.