We will exhibit at the "9th Adhesive and Joining EXPO [Tokyo]" held from November 12 to 14.

For the application of two-component adhesives and gap fillers! Compatible with high-viscosity liquids and high-concentration slurries.

The 2-component mixing specification Mohno Dispenser is a unit that combines two Mohno Dispensers with a static mixer. It allows for continuous application while accurately mixing the base agent and hardener. [Features] ● Easy adjustment of mixing ratio and discharge volume The dispenser has a rotary volumetric single-axis eccentric screw structure, allowing for easy adjustment of the mixing ratio and discharge volume simply by controlling the rotation of the Rotor. ● Stable discharge of high-viscosity liquids It can handle liquids with a viscosity exceeding 500,000 mPa·s. ● High mixing accuracy Even when there is a large difference in viscosity or mixing amounts, it can maintain stable mixing accuracy. ● Supports large volumes It is suitable for application to large workpieces in processes such as EV manufacturing. [Examples of discharged liquids] 2-component epoxy resin, 2-component silicone resin, 2-component gap filler *For more details, please contact us.

• dispenser

The basic structure is the same as the "Mohno Pump," a progressing cavity pump! It achieves high-precision application even with high-viscosity liquids and high-concentration slurries.

The basic structure of the Mohno Dispenser is a progressing cavity pump of the same rotary volumetric type as the Mohno Pump. This structure allows for the instant discharge of high-viscosity liquids and precise application. The Mohno Dispenser, which achieves improved product quality and reduced cycle time, is active in various industries such as electronics, food, automotive, and cosmetics. [Features] - Instant discharge of high-viscosity liquids up to 1,000,000 mPa·s and high-concentration slurries - Prevents liquid dripping during stops, keeping the workpiece and surroundings clean - Less affected by changes in the state of the liquid, enabling stable application over long periods - Easy setting and adjustment of discharge volume through servo motor control - Achieves quality improvement by accurately applying the necessary amount [Examples of Discharged Liquids] Two-component adhesives, silicone resins, metal pastes, solder pastes, thermal grease, thermal silicone, liquid gaskets, UV-curable adhesives, epoxy resins, conductive adhesives, various slurries, mastic sealers, hemming sealers, steel plate reinforcements, shampoos, lipsticks, emulsions, cold packs, chocolate, whipped cream, seasoning liquids, and more. *For more details, please refer to the PDF catalog or website, or contact us.

• dispenser

“Mohno Pump for coating” is suitable for coating processes that require precise discharge accuracy.

The coating Mohno Pump is a pump developed to supply coating liquid with high precision to coaters in the manufacturing processes of functional films and lithium-ion secondary batteries. It accommodates a variety of liquids, from low-viscosity solvent-containing liquids to electrode slurries. Accurate liquid supply contributes to improved product quality. ■ Accurate and precise dispensing The Mohno Pump, which is a progressing cavity pump with excellent metering capabilities, is equipped with a dedicated device that suppresses minute pressure fluctuations, achieving even higher precision dispensing. ■ Excellent wear resistance materials Durable materials are available to match the transferred liquids. ■ Easy disassembly and cleaning With fewer parts, maintenance can be performed in a short time. ■ Reduction of material loss By adopting a slim casing, the internal volume is reduced by about 30%, contributing to the reduction of material loss. [Examples of applications] High-performance films, lithium-ion secondary batteries, all-solid-state batteries, fuel cells, multilayer ceramic capacitors, heat dissipation sheets, etc. For more details, please refer to the related links.

• Positive Displacement Pump

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

From turning processing to milling processing—responding to process integration with composite machining centers C&G Systems Co., Ltd. has released the lathe module "TURNING," which realizes the "true process integration" required in the era of composite machining centers. By covering 2D and 3D milling, wire electrical discharge machining, and turning processing, "EXCESS-HYBRID II / Parts CAM" has evolved into an ALL-IN-ONE CAM system that transcends the boundaries of processing fields. The lathe module "TURNING" was developed against the backdrop of voices from the field, where the advancement of high functionality and integration of NC machine tools has led to continued reliance on interactive input and manual programming, resulting in increased man-hours, occurrence of errors, and a shortage of skilled technicians. While composite machining centers have the significant advantage of completing both turning and milling in one machine, the diversification and complexity of processed shapes have made programming advanced and intricate, necessitating measures against interference risks and efficient process design. "TURNING" achieves a reduction in programming time and stable quality reproduction, maximizing the performance of composite machining centers.