Pressure sensor for bipropellant rockets

Ideal for measuring pulsations and unsteady behavior with a bandwidth of 50 kHz, temperature-resistant up to 180°C, built-in amplifier (0-10V output) high-precision pressure sensor.

The ultra-high-speed pressure sensor M5HB can measure not only static pressure but also pressure changes within a bandwidth of 0 to 50 kHz. This is achieved by the digital circuit continuously adjusting the analog signal in real-time, with an output of 0 to 10V. The compact sensor head with M5 fine thread can be used at temperatures up to 180°C. It has a pressure resistance of up to five times the measurement range and is an excellent model for vibration resistance. 【Features】 - Temperature resistance of the sensor head: 180°C - Output is an analog signal of 0 to 10V (with built-in amplifier) - Wide temperature compensation range: -20 to 125°C or -40 to 180°C - Bandwidth of 50kHz, ideal for measuring pulsations and unsteady behavior - Resistant to impacts and vibrations - Compact design, pressure connection is M5×0.5 fine thread

• Pressure

OEM ultra-compact pressure sensor from φ11 - compatible with temperatures from -40 to 150℃!

The LC series pressure sensors utilize proprietary chip-in-oil technology. They are all-in-one sensors that house the measurement cell, digital temperature compensation circuit, and signal processing circuit in a compact stainless steel or Hastelloy housing. They offer excellent environmental resistance and output mathematically compensated measurement results as an analog 0.5 to 4.5V ratiometric output signal across a wide temperature range of -40 to 150°C. 【Features】 - Sealed and protected sensor electronics - resistant to environmental influences - Operating temperature: up to 150°C - Ultra-compact and robust housing made of SUS (Hastelloy C-276 available as an option) - No external electronics required for compensation or signal processing - High precision, excellent long-term stability, no hysteresis - Pressure range: 1 to 1000 bar (0.1 to 100 MPa) - Easy integration into the overall system - High flexibility in use due to the pressure sensor part and signal processing electronics being handled by two chips - Wiring options include pin output, wire output, and socket types

• Pressure

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

We will be exhibiting at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises" from December 16 (Tuesday) to 18 (Thursday), 2025. Please feel free to stop by our booth. We look forward to meeting everyone.

Thank you very much for your continued support. Donaldson Japan Co., Ltd. will be closed during the following period: From April 25 (Saturday) to May 6 (Wednesday). Inquiries made during the closure will be answered sequentially after May 7 (Thursday). We sincerely apologize for any inconvenience this may cause. Thank you for your understanding and cooperation.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.