We will exhibit at the International Image Equipment Exhibition 2025!

Customized proposals tailored to your needs! A space-saving and easy-to-install surface and appearance inspection CIS line camera.

CIS line cameras are compact and high-performance devices that integrate an image sensor, lens, and light source into an all-in-one solution. They support a wide range of interfaces including Camera Link Base/Full, CoaXPress 1.1/2.0, USB 3.0, and 10GigE. **Features of WHEC CIS Line Cameras:** - Smaller, thinner, and lighter compared to conventional cameras - Long lengths of up to 6000mm in a single unit - Resolution up to 1200 dpi - Reduces the hassle of adjustments and selections compared to traditional camera units - No optical distortion due to 1:1 "true-to-life reading" - Uses CMOS sensors and operates on a single low power supply (low power consumption) - Minimal light loss due to close reading, resulting in lower power consumption of the light source (working distance of approximately 50mm) We can customize the reading width, resolution, interfaces, and external light sources to suit inspection applications. Please feel free to contact us.

• Sensors

- Up to 4000dpi possible - Ideal for inspecting tiny foreign objects and abnormalities!

This is a device based on the structure of a CIS line camera, designed to improve scanning accuracy. We customize the reading width and light source according to your application. 【Features】 - Complete line acquisition without pixel dropout - Compact design with an integrated structure of the image sensor and lens - No complicated adjustments or maintenance required Please contact us for more details.

• Monochrome camera

Maximum vertical space required for installation is 152mm! Ideal for inspection environments with space limitations.

CIS line cameras are compact and high-performance devices that integrate an image sensor, lens, and light source into an "All-in-One" solution. 【No lens distortion and uniform edge scanning】 They achieve 1:1 image acquisition with a macro lens, eliminating concerns about peripheral blur or distortion. 【Resistant to vibration effects】 CIS cameras are positioned closer to the inspection object compared to traditional camera systems, making them less susceptible to inspection environment variations and allowing for clear image acquisition. 【Labor-saving installation and maintenance】 One CIS line camera can handle wide inspection objects, such as those measuring 1100mm, eliminating the need for complicated adjustments that occur when using multiple cameras, allowing for immediate use after installation. 【Rich interfaces】 - CameaLink Base/Full - CoaXPress 1.1/2.0 - USB3.0 - 10GigE 【Customized proposals tailored to applications】 We offer customization options based on customer needs, including reading width, interfaces, and external light sources, so please feel free to contact us for more details.

• Color camera

Are you struggling with issues like lack of space and distortion in acquired images?

The WHEC CIS line camera is a compact and high-performance device that features an "All-in-One" design with an image sensor, lens, and light source. 【Supports Long Lengths】 Achieves a reading width of up to 6000mm! One CIS line camera can handle significantly large inspection items, eliminating the need for adjustments of multiple cameras, lenses, or light sources. 【Rich Interfaces】 - CameraLink Base/Full - CoaXPress 1.1/2.0 - USB 3.0 - 10GigE 【No Lens Distortion and Uniform Edge Scanning】 Achieves 1:1 image acquisition with a macro lens, eliminating concerns about peripheral blur or distortion. 【Resistant to Vibration Effects】 Due to the close distance to the inspection item compared to conventional camera systems, it is less affected by the inspection environment, allowing for clear image acquisition. *It is also possible to use external light sources according to the inspection item and application. We offer customized proposals to meet customer needs, so please feel free to contact us for more details.

• Monochrome camera

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.