Exhibition Information: 'The 40th Nepcon Japan, 27th Printed Circuit Board EXPO'

Newly Developed" Bench Scale, capable of performing the same processing operations as the actual machine even with a small sample! We realize our customers' desire for "this is the filtration machine I wanted!

The "Small Filtration Dryer" is a bench-scale horizontal plate filter. It is equipped with paddle-type stirring blades inside a sealed filtration chamber. Although it is a small machine with a filtration chamber capacity of 3L, it can consistently perform all processes from filtration to cake washing, liquid removal, and vented drying, just like a commercial-level machine. 《Recommended for the following people!》 ■ Want to experiment with a small sample ■ Want to prototype products in the kilogram range ■ Want to investigate various operating conditions ■ Want to shorten the time for sample prototyping ■ Want to consider operating conditions for samples that require exposure measures *The reasons for the recommendations are detailed in the attached document. Please download it for confirmation.

• Drying Equipment
• Separation device
• Mixer/agitator

Explosion-proof! Separation, cleaning, and solvent replacement of nanoparticle slurry all in one machine. Available in a benchtop size for research and development.

The "Mitsubishi DynaFilter (DyF)" is a rotary ceramic membrane filtration device that precisely separates nano-sized fine particle slurries, allowing for the recovery of high-concentration concentrated liquid and clear filtrate. By rotating the disk, it suppresses the formation of a cake layer that causes filtration issues, maintaining high processing capacity. It can perform cleaning of concentrated slurries (impurity removal) and solvent replacement, and due to its explosion-proof design, it can handle slurries containing organic solvents. 【Features】 ■ Offers a tabletop type that is among the smallest in the industry ■ Supports small sample sizes ■ Filters difficult-to-filter slurries with high efficiency ■ Can concentrate without contamination to a high degree ■ Explosion-proof design accommodates a wide range of solvents *For more details, please refer to the PDF document or feel free to contact us.

• Concentration Equipment

For wet centrifugal classification/separation! It is possible to separate (concentrate, remove) submicron particles in a short time.

The "Mitsubishi Disc Separator" is a disc-type centrifuge with a proven sales record of over 100,000 units. Thanks to its powerful centrifugal force and the interaction with the built-in separation plates, it can quickly separate and remove submicron particles from the raw material slurry. By applying this separation technology and adjusting the supply flow rate to the disc separator, it can be used in wet classification and purification processes to change the captured particle size. 【Features】 ■ Explosion-proof options available ■ Continuous processing without stopping rotation - Fine particles (along with liquid): Continuously discharged from the impeller - Coarse particles: Automatically discharged intermittently from the discharge port ■ Equipped with a cooling jacket to minimize temperature changes in the processing liquid *For more details, please refer to the PDF document or feel free to contact us.

• centrifuge
• Concentration Equipment
• Separation device

Introduction to Artificial Intelligence Application Development Led by Element Technologists Basics of Deep Neural Network Models and MT Systems, Minimization of Training Data, Development Implementation Procedures ~ Learning AI Application Know-How through "Automation of Development, Virtual Inspection, and Detection of Unknown Anomalies" ~ 【AI Construction Demo Included, Excel Materials on AI Construction and Calculation Methods Provided to Interested Parties】 ------------------------------------------------------------ https://johokiko.co.jp/seminar_chemical/AD260103.php ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ We will inform you about upcoming technical seminars with discounted participation fees. If you would like to apply for each seminar with a discount, please contact ikuma.fukui@wmjplab.com. * The discount on participation fees is available to anyone. * However, we do not accept applications from technical consultants or instructors. * If you wish to have an in-house training session for the same seminar, please contact me directly. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Method for determining inspection standards, standard values, and safety factors based on economic risks Practical introduction to a method for preventing profit and loss that does not rely on statistical distribution (loss function) [With PC exercises (using templates that can also be repurposed for in-house issue discussions)] ------------------------------------------------------------ https://www.science-t.com/seminar/B260220.html ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ We will inform you about upcoming technical seminars with discounts on participation fees. If you would like to apply for each seminar with a discount on the participation fee, please contact ikuma.fukui@wmjplab.com. * The discount on the participation fee is available to anyone. * However, we do not accept applications from technical consultants or instructors. * If you wish to have the same seminar as an in-house training, please contact me directly. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Artificial Intelligence Suitable for Detecting Unknown Defects and Abnormalities through Inspection, Sensing, and Monitoring ~ Introduction to the Basics and Applications of MT Systems (MT Method) ~ [Half-Day Intensive Seminar] [AI Construction and Calculation Method Excel Materials Provided for Interested Participants] ------------------------------------------------------------ https://www.rdsc.co.jp/seminar/260207 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ We will inform you about upcoming technical seminars with discounted participation fees. If you would like to apply for each seminar with a discount, please contact ikuma.fukui@wmjplab.com. * The discount is available to anyone. * However, we do not accept participants who are technical consultants or instructors. * If you wish to have this seminar as an in-house training, please contact me directly. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Robust Optimization Development Method to Solve the Four Major Challenges in Technology and Product Development: A Practical Introduction ~ Learning through Comparison with Conventional Development Methods and Experimental Design Methods [Quality Engineering Parameter Design] ~ [Software and Discussion Template Available for Interested Parties] ------------------------------------------------------------ https://www.rdsc.co.jp/seminar/260316 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ We will inform you about upcoming technical seminars with discounted participation fees. If you would like to apply for each seminar with a discount, please contact ikuma.fukui@wmjplab.com. * The discount on participation fees is available to anyone. * However, we do not accept participation from technical consultants or instructors. * If you wish to have this seminar as an in-house training, please contact me directly. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Introduction to AI Application Development Led by Element Technology Developers Basics of Deep Neural Network Models and MT Systems, Minimization of Learning Data, Development Implementation Procedures ~ Learning AI Application Know-How through "Automation of Development, Virtual Inspection, and Detection of Unknown Anomalies" ~ 【AI Construction Demo Included, Excel Materials on AI Construction and Calculation Methods Available for Interested Parties】 -------------------------------------------------- https://johokiko.co.jp/seminar_chemical/AD260103.php ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ We will inform you about upcoming technical seminars with discounts on participation fees. If you would like to apply for each seminar with a discount on the participation fee, please contact ikuma.fukui@wmjplab.com. * The discount on participation fees is available to anyone. * However, we do not accept applications from technical consultants or instructors. * If you wish to have an in-house training session for the same seminar, please contact me directly. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━