Information on Accredited Calibration Services

その製品を、「認定校正」にしませんか？

当社は、計量法校正事業者登録制度（JCSS）の登録事業者として圧力区分の「リーク計」の校正を実施しております。 また、公益財団法人日本適合性認定協会（JAB）により、国際規格ISO/IEC17025に適合している校正機関として認定され「流量」の校正を実施しており、シンボル付き校正証明書の発行が可能です。 フクダは、国際MRA対応の認定校正機関です。 規格要求への適合性 認定校正された計測機器を用いることで、お客様で運用している各種規格への適合性が増します。 計測機器管理の確実性 国家又は国際標準への確実なトレーサビリティ（校正の連鎖）が求められていますが、認定事業者による校正であれば、要求事項を満足するため、お客様での計測機器管理に役立ち、簡素化も期待できます。 計測結果に対する信頼性 審査機関による認定審査では、校正能力も対象となり、校正の作業内容及び手順、不確かさの見積り等も審査されることから、校正作業により得られる結果は、高い水準の信頼性が確保されます。

• Other measurement, recording and measuring instruments

A standard device/calibrator that generates a specific flow rate. Convenient as a "standard leak" for setting conditions of air leak testers, checking sensor sensitivity and flow, and for daily inspections!

The "FFM series" is an essential piece of equipment to ensure the reliability of air leak tests. It has minimal material degradation over time, allowing for safe and stable sensor sensitivity verification and leak tester inspections for extended periods. Sensor sensitivity verification and inspection can be utilized as a "standard leak." 【Features】 ■ Active in routine inspections and more ■ Can be directly connected to the calibration port of air leak testers ■ Built-in flow standard enhances the convenience of air leak testers ■ Allows for verification of measurement errors by comparing the values indicated by the tester with those of the flow standard ■ Easily creates conditions for detecting leaks or confirming their absence ■ JCSS Registration | JCSS Calibration Certification (please contact us for details) https://www.nite.go.jp/iajapan/jcss/labsearch/index.html ↑↑↑ By searching for "Fukuda" on this URL site, it will be displayed * For more details, please refer to the PDF materials or feel free to contact us.

• Leak Testing Equipment
• Flow Control
• Calibration and repair

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, enabling efficient parking lot operations. For large parking lots, we recommend the "Floor Management Method" and "Block Management Method," which focus on cost reduction. Sensors are installed at regular intervals to count and manage the number of passing vehicles. This method offers the advantages of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 For smaller facilities, we recommend the "Parking Space Management Method," where sensors are installed in each parking space to display availability with high accuracy. By providing reliable occupancy information, this method helps reduce unnecessary entry of new vehicles and ensures safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.