Decision to exhibit at MEX Kanazawa 2026

Inclined transport and speed control are now possible! The high-performance electric assist unit caster E-Drive Optima has been newly introduced.

E-Drive is a high-assist performance electric assist unit caster that can support a maximum total weight of 500 kg. Introducing the new series, E-Drive Optima. While maintaining ease of use, it now also supports inclined transport and speed control. Even for manual handling of heavy loads with high weight, this product allows for easy operation with hand controls, reducing the burden on operators and improving efficiency. 【Features】 ■ Reduces operator burden and improves efficiency ■ High assist performance ■ Supports a maximum total weight of 500 kg (per unit) ■ Capable of inclined transport ■ Speed control available ■ Settings can be adjusted according to the usage environment

• caster

Supports heavy load transportation with high assistance! Can be retrofitted to existing carts. Improves work efficiency with tilt and speed control.

The "E-DRIVE OPTIMA Series" is a retrofittable electric assist unit designed to enhance the efficiency of cart operations in manufacturing and factory settings. It supports weight assistance of up to 500 kg, and with two units installed, it can handle even higher load tasks. It accommodates inclined transport and speed control, allowing for settings tailored to the work environment. Easy to install and operable with just a thumb, it significantly reduces the burden of manual pushing tasks. This high-performance assist unit simultaneously improves the safety of transporting heavy items and work efficiency. 【Features】 ■ Reduces worker burden and improves efficiency ■ High assist performance ■ Supports a maximum total weight of 500 kg (per unit) ■ Capable of inclined transport ■ Speed control available ■ Settings can be adjusted according to the usage environment

• caster

Start-up resistance value reduced by approximately 40%! Heavy-duty casters that reduce the load on transport operations and operators.

The "DELTA Series" is a lightweight caster designed for heavy-duty transport with agile operability. By employing precision bearings in the swivel section, it offers smooth maneuverability, reducing the workload. It is also well-suited for applications like AGVs that require tight turning. Additionally, safety measures such as foot protection safeguard the operator's feet, preventing accidents before they occur. We offer three specifications: "Swivel," "Total Lock," and "Fixed." 【Features】 ■ Reduces operator burden ■ Increases productivity ■ Agile operability ■ Durability and long lifespan in factories ■ High expandability ■ ITP polyurethane wheels SH92 【Options】 ■ Direction lock ■ Foot protection ■ SFP elastic rubber wheels SH67 *For more details, please refer to the PDF materials or feel free to contact us.

• caster

High turning performance with dual wheels! Introducing casters that absorb radial loads with precision bearings.

The "DELTA TWIN Series" is a heavy-duty double wheel caster that employs precision bearings in the swivel section, reducing swivel resistance in conjunction with load distribution through its dual wheels. The precision bearings absorb radial loads, and the fork section features a double coating with blue zinc plating. It supports a maximum auxiliary total weight of 600 to 4500 kg, with a wheel diameter of 80 mm and a load capacity of 600 kg. 【Features】 ■ Light and agile operation ■ High durability and long lifespan ■ High load-bearing performance ■ Excellent swivel performance with dual wheels ■ Proven performance with AGV carts and more *For more details, please refer to the PDF document or feel free to contact us.

• Power tools

Ideal for the automotive industry! Reduces the load of heavy material transport.

■Maximum load capacity of over 2 tons per wheel ■Uses tapered bearings in the swivel section, maintaining stable performance even in high load ranges ■Various directional locking functions (additional directions) ■Combination of wheel lock and directional lock is possible ■Selectable fixed/flexible/directional lock/total lock ■FTP polyurethane SH92 wheels 【Options】 ■Foot protection

• caster

Spring two-layer structure! The new wheel "Ultratech" enables use in harsh environments.

The "OMIKRON FLEX" is a spring caster with approximately 60% reduced starting resistance and top-notch durability. It can be used with towing carts weighing over 1 ton. The high-strength swivel bearings ensure smooth manual operation. Additionally, it has been proven to endure towing at a maximum speed of 16 km/h and can easily handle uneven surfaces. 【Features】 ■ Improvement in transport operations and reduction of load ■ Capable of handling ultra-heavy towing ■ High-speed towing model available ■ New wheel Ultratech ■ Approximately 60% reduction in starting resistance *For more details, please refer to the PDF document or feel free to contact us.

• caster

● What is a hydrogen leak detector? It can measure leaks in small areas that could not be detected in air leak tests and can also identify the leak locations. It is a detector that uses a mixture of 5% hydrogen and 95% nitrogen (non-flammable gas: ISO10156:2017) as the tracer gas. ● What is a helium leak test system? It is a leak test system suitable for high-precision or high-pressure leak inspections. The helium leak test system uses helium gas as the detection gas (tracer gas) and detects the helium that has leaked out. It is the leak test method among Fukuda's leak testers that can detect the smallest leaks.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.