Low-cost measurement of wind speed and temperature in narrow gaps!

For thermal management in product development such as electrical devices, including heat dissipation analysis and simulation. It can be combined with multi-point wind speed measurement and output units!

The "Thermal Type Ultra-Compact Adhesive Wind Speed and Temperature Probe" is highly accurate, with an indication value of ±3% ±0.1m/s in the range of wind speeds from 0.1 to 10 m/s or 0.3 m/s to 30 m/s when used with the Tonic anemometer. Each probe can be attached to the desired measurement point using tape on its base. No mounting fixtures are required. Additionally, the "QB-5" has a height of just 5mm from the base, making it suitable for verifying airflow and wind speed distribution within equipment enclosures. When combined with a multi-point wind speed measurement and output unit, it can accurately measure wind speed distribution at up to 256 points. 【Features】 ■ Thermal type ultra-compact ■ High precision ■ No mounting fixtures required ■ Multi-channel anemometers also available *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Analytical Equipment and Devices
• Thermo-fluid analysis

A catalog published by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors! It also introduces the operating principles and calibration systems.

This catalog is published by Tonic, which manufactures and sells anemometers, air volume meters, and wind speed sensors. It features the omnidirectional probe "QB・QA series," which encapsulates a single crystal germanium semiconductor in a Φ2.5mm aluminum sphere, as well as anemometers such as "GeZ-200D・GeZ-200DA." Additionally, we introduce the operating principles and calibration systems of Tonic anemometers. 【Featured Products】 ■ Adhesive-type wind speed and temperature probe ■ Support rod-type wind speed and temperature probe ■ Multi-point wind speed and temperature measurement system ■ Digital wind speed and temperature meter ■ Analog wind speed and temperature converter *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and humidity measuring instruments
• Analytical Equipment and Devices

It has become possible to conduct thermal cooling analysis that I thought was impossible, verify simulations, and measure wind speed distribution in narrow gaps! Such as a high-temperature digital 4-channel anemometer.

Introducing the "High-Temperature Anemometer/Adhesive Type Wind Speed and Temperature Probe" handled by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. We have made it possible to conduct thermal cooling analysis and simulation validation that we thought were impossible, as well as measure wind speed distribution in narrow gaps. Using the adhesive type wind speed and temperature probe, we offer a lineup including the high-temperature digital 4-channel anemometer "PtY-40DA," which allows simultaneous measurement of up to 4 channels, as well as the "PtY-10DA." 【Features】 <PtY-40DA> ■ Simultaneous measurement of up to 4 channels ■ Wide measurement range: wind speed from 0.2 to 30 m/s, wind temperature from 0 to 120℃ ■ Equipped with an RS232C port on the main unit ■ By using multi-point wind speed measurement software, monitoring and logging on a PC are also possible ■ Measurement values can be saved as text files *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices
• Wind Speed/Volume Meter
• air conditioning

This is a thermal wind speed detection switch that turns the relay contacts ON/OFF when it detects the set wind speed! It provides a consistently stable wind speed and air volume.

This is a thermal air velocity detection switch that detects the airflow inside ducts and devices, and turns the relay contacts ON/OFF when the set wind speed is detected. Since it can be permanently installed in the duct, stable wind speed and air volume can always be obtained. Additionally, due to its relay output, automatic control of fans and dampers can be easily achieved by connecting it to control devices such as PLCs.

• air conditioning

I was unable to do thermal design, cooling effect analysis, simulation result verification, and measuring wind speed distribution in narrow gaps, but now it's possible!

We would like to introduce the "High-Temperature Multi-Point Anemometer / Ultra-Compact Adhesive Anemometer and Temperature Probe" handled by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. We have made it possible to conduct thermal design, cooling effect analysis, simulation result verification, and wind speed distribution measurement in narrow gaps, which we previously thought was impossible. Using the high-temperature adhesive anemometer and temperature probe, we offer a high-temperature multi-point anemometer measurement system "PtY-160DA" capable of simultaneous measurement of up to 16 channels, along with models such as "PtY-10DA/40DA." 【Features】 <PtY-160DA> ■ Capable of simultaneous measurement of up to 16 channels ■ Wide measurement range: wind speed from 0.2 to 30 m/s, wind temperature from 0 to 120℃ ■ Equipped with an RS232C port on the main unit ■ Wind speed and temperature for specified channels can be displayed on the main unit ■ By using monitoring software for multi-point anemometers, monitoring and logging on a PC is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Wind Speed/Volume Meter
• Ventilation and Exhaust

Leave wind speed and airflow monitoring to us! We have a wide range of duct meters available.

This catalog is published by Tonic, which manufactures and sells anemometers, air volume meters, and wind speed sensors. It features duct-mounted air volume detectors such as the "DMS-N1/NH1," as well as wind speed and air volume detectors like the "DME-1" and "dMS-5SFT." 【Featured Products】 ■ Duct-mounted air volume detectors ■ Duct-mounted wind speed and temperature detectors ■ Wind speed and air volume sensors for air conditioning ducts ■ Wind speed switches ■ Multi-point wind speed measurement systems for research and development *For more details, please refer to the PDF document or feel free to contact us.

• Wind Speed/Volume Meter

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Features: ●Core 3 N355/N150 ●DDR5 SODIMM x 1 (up to 16GB) ●HDMI 1.4, VGA, LVDS ●2.5GbE x 3, SATA 6Gb/s, GPIO 8-bit ●USB 3.2 Gen 2 x 2, RS-232/422/485 x 2, RS-232 x 2 ●Mini PCIe x 1, M.2 2230 E-Key x 1, M.2 3052 B-Key x 1 ●DC input 9V～36V

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, DP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x 1, M.2 2230 E-Key x 1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.