Able to respond to residential arson / New product for residential arson alarms

New product of fire detection line alarm that can detect abnormal temperature warnings associated with fires in multiple locations.

■Features of Fire Detection Wire Alarm 1. It can provide abnormal temperature alarms associated with fires in multiple locations using fire detection wires. 2. It can provide abnormal temperature alarms associated with fires in multiple locations such as "the attic and indoors" or "under the floor and indoors." 3. Fire detection wires can be inserted into gaps between walls, furniture, and electrical appliances to provide abnormal temperature alarms associated with fires. 4. This eco-friendly product can provide abnormal temperature alarms associated with fires with zero standby power using fire detection wires. 5. It is easy to install and move, allowing anyone to set it up. 6. It is a product that integrates multiple shape memory alloys at equal intervals along an extended wire. 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. It can directly sense temperature and signal through physical operation without the need for power sources or measuring devices. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. It can be wired similarly to electrical equipment wiring. 12. It is a product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Safety switch
• Safety Sensors
• Other safety equipment

Able to respond to residential arson / New product for residential arson alarms

■Features of Residential Arson Detectors 1. Can detect arson in residential areas at an early stage. 2. Easily installed outdoors, in garages, storage sheds, or waste disposal areas of buildings prone to arson. 3. By extending the arson detection wire, a wide area of arson alert can be created. 4. An eco-friendly product that can detect and alert for fires caused by arson with zero standby power. 5. Can continuously monitor for fires caused by arson in residential areas. Reliable, safe, and secure. 6. A product that integrates numerous shape memory alloys at equal intervals along the extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires for temperature detection and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. Direct temperature detection and signaling through physical operation without the need for power sources or measuring devices. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to detect temperature and signal. 11. Can be wired similarly to electrical equipment wiring, suitable for both indoor and outdoor use. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Safety switch
• Safety Sensors
• Other safety equipment

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. Direct temperature sensing and signal generation through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Various abnormal temperatures can be monitored collectively on a daily basis, ensuring reliable and safe maintenance management. 4. Early detection of abnormal temperatures in various devices can prevent equipment damage and fires. 5. By simply extending the wiring, a wide range of abnormal temperature monitoring can be achieved. 6. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 7. This product integrates numerous shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

JOHNAN has released a video that clearly explains the implementation technology for stretchable films, which are expected to be utilized in wearable devices and medical equipment. In the video, you can see how the film, which has excellent elasticity, stretches and contracts. Please check our high technological capabilities and the flexible characteristics that are useful for product development. We hope this will help you generate new ideas in product development. ▼You can watch the video here [Link to the implementation page for stretchable films] https://www.johnan.com/dms/mounting/filmdevic/stretchable/

Thank you very much for your continued support. We sincerely apologize for the inconvenience, but our company will be closed for summer vacation during the following period. 【Closure Period】 From Saturday, August 9, 2025, to Thursday, August 14, 2025. We will resume normal business operations on Friday, August 15. We appreciate your understanding during this time and apologize for any inconvenience caused.

"Because it's an invisible place, we won't overlook it." Japan's climate is characterized by high temperatures and humidity, and particularly after typhoons and heavy rains, the conditions can be harsh for homes. It's not just the roofs and exterior walls that are affected by rain and wind. The area beneath the floor is actually the most susceptible and often overlooked point. This time, we will explain the "checkpoints for under the floor" that should be confirmed after a typhoon or heavy rain, the "responses" if abnormalities are found, and measures for preventing recurrence. [Table of Contents] ■ Why is underfloor checking necessary? ■ Checkpoints to confirm after a typhoon or heavy rain ■ Responses when damage is discovered ■ Points for preventing recurrence ■ Suggestions from Seihou Products ■ Summary Please be sure to read the [related materials] and [related links]. ↓ ↓ ↓

Explosion-proof motors available in stock We will deliver within 7 days to meet your delivery schedule. 【What is an explosion-proof motor?】 In factories and plants, flammable gases and vapors are present. When these mix with air and come into contact with an ignition source, an explosion or fire can occur. This motor is designed with measures to eliminate such ignition sources. 【Available stock models】 ■ Pressure-resistant explosion-proof motors, explosion-proof grade d2G4 - Foot-mounted type, output 0.4 to 3.7 kW, 4 poles - Flange type, output 0.4 to 0.75 kW, 4 poles ■ Increased safety explosion-proof motors, explosion-proof grade eG3 - Foot-mounted type, output 0.2 to 0.75 kW, 2 and 4 poles - Flange type, output 0.2 to 0.75 kW, 2 and 4 poles

As part of the "Hometown Ibara Future Creation Human Resource Development Project," we welcomed local elementary and middle school students to the special summer program "Ibara Job Exploration Tour 2025," a collaboration between the Ibara City Chamber of Commerce and the Corporate Branding Committee. We conducted a presentation that clearly and enjoyably introduced how our technology supports society, allowing the children to learn about the appeal of manufacturing and the significance of working while interacting with actual devices and products. Through this initiative, we hope to deepen our connection with the community and nurture the curiosity of the children who will carry the future. We sincerely thank everyone who participated, as well as all those involved in planning and organizing the event.