QTM now supports Japanese.

Data acquisition linked to gaze/eye movement is possible.

The Qualisys motion capture system can be used in combination with eye trackers from other manufacturers to synchronize and measure motion data and gaze data. Furthermore, the measured eye tracking information can be input into the Qualisys motion capture system's dedicated analysis software, QTM (Qualisys Track Manager), where it is displayed as gaze vectors and follows the gaze. Of course, eye tracking data can also be output in real-time from QTM in TSV (text format) or protocols like MATLAB. *Please inquire about compatible eye trackers.

• 3D measuring device
• Other measurement, recording and measuring instruments

Oqua dedicated high-speed camera capable of complete synchronization.

The Oqus Video series Oqus 210c can measure data in complete synchronization with other Oqus motion capture cameras and is capable of outputting video during measurement in color. Additionally, it can be calibrated with motion capture cameras, allowing for the verification of 3D data overlaid on video footage. It supports high-speed measurements of up to 750fps. This camera is effective for those who want to use actual video as a reference, in addition to motion capture data during measurement.

• High Speed Camera

Simple and intuitive Oqua dedicated control software.

The tracking software Qualisys Track Manager, which centrally controls QUALISYS motion capture Oqus cameras, seamlessly operates from tracking to analysis. With intuitive operation, anyone can easily obtain high-precision data. Additionally, we provide licenses for each facility, allowing you to install and use it on as many PCs as needed.

• 3D measuring device

Achieving high-precision data acquisition even in MRI rooms under strong magnetic field environments.

Oqus MRI is a motion capture camera that has been shielded to allow for safe and noise-free measurements in environments such as high magnetic field MRI rooms. Of course, not only the camera but also the cables connected to the camera and the materials of the calibration kit are important. At Qualisys, we manufacture cables and calibration kits using materials like fiberglass to ensure they can be used without issues in MRI rooms. This system enables the acquisition of 3D motion data synchronized with brain activity by using it in conjunction with fMRI.

• 3D measuring device
• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

Achieving high-precision 3D data and high cost performance.

The Oqus camera is the latest series of motion capture cameras from Qualisys for 3D motion analysis systems. It can handle high-speed movements of up to 10,000 Hz while accurately capturing the precision of their positions. Furthermore, by synchronizing dozens of cameras, it achieves high-precision data acquisition at speeds of thousands of frames per second, even with hundreds of markers. Oqus performs 2D computational processing internally in each camera and outputs numerical data, resulting in low latency and making it suitable for real-time tracking.

• Other physicochemical equipment
• 3D measuring device
• Other inspection equipment and devices

The world's only 3D underwater motion analysis device.

Oqus Underwater is a groundbreaking camera that enables optical motion capture underwater. Its specifications are nearly equivalent to those of the Oqus Standard camera, allowing for high-precision data output even with fast movements, just like the Standard camera series. Naturally, the measurement subjects only need to have reflective markers attached, making it less burdensome and allowing for measurements in a natural state. It is effective for data acquisition in motion analysis of swimmers, behavior of underwater robots, and operational verification of industrial equipment used underwater.

• Other physicochemical equipment
• 3D measuring device
• Analytical Equipment and Devices

Utilizing high-precision 3D positional information for accuracy experiments and verification during product development.

The motion capture system 【Qualisys】, which can obtain three-dimensional positional data, is also effective in behavior experiments and motion verification of developed products. In vehicle manufacturing, it can acquire high-precision three-dimensional data for verifying body distortion, conducting engine vibration tests, and analyzing the motion of doors and hatchbacks opening and closing. By using the motion capture system 【Qualisys】, it is possible to numerically and visually recognize improvement and enhancement points for developed products.

• 3D measuring device
• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

Wide-ranging support from fishing gear development to shipbuilding, underwater unmanned robot development, and research.

Model ship motion analysis experiments can be conducted over a wide range. Qualisys supports long-range active markers, allowing it to recognize and track model ships located more than 100 meters away, which is impossible with standard markers. By using long-range active markers, it enables motion analysis of objects moving over large distances. Additionally, Qualisys has the world's only optical underwater camera, making it possible to obtain highly accurate underwater motion data that was previously unattainable. This opens up new possibilities for various research areas, including fishing gear, ship propellers, and naval research. Furthermore, by combining ground-based Qualisys cameras with underwater Qualisys cameras, it is also possible to integrate ground data with underwater data.

• 3D measuring device
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.