New product for temperature sensing wire for monitoring abnormal temperatures of electrical wires installed on electrical equipment.

Monitoring and alarming of dangerous temperatures in various industries / New product for dangerous temperature alarm devices.

■Features of the Dangerous Temperature Alarm Device 1. Capable of monitoring and alarming various dangerous temperatures (80°C) across different industries. 2. Can be installed in areas at risk of dangerous temperatures to monitor and alarm for dangerous temperatures, with the ability to relay signals. 3. Allows for continuous daily monitoring of various dangerous temperatures in each industry, enabling early detection and safe response. 4. An eco-friendly "dangerous temperature alarm device" that anyone can easily install, with zero standby power. 5. A new type of "dangerous temperature alarm device" that combines an alarm panel with a temperature sensing wire (80°C). ◇Features of the Temperature Sensing Wire 1. Can directly sense temperature and emit signals through physical operation without the need for a power source or measuring equipment. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Can be wired similarly to electrical wiring. It can be used for both indoor and outdoor wiring. 4. The shape memory alloy has permanent memory, is rust-free, and retains its state once activated, allowing for long-term use. 5. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (120 seconds). 6. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

Optimal safety measures for abnormal temperatures in distribution board equipment / New product for distribution board alarm system

■Features of the Distribution Board Alarm Device 1. Temperature sensing wire (80℃) is wired to the distribution/control panel equipment, allowing for monitoring and alarming of abnormal temperatures. 2. Abnormal temperatures in the distribution/control panel equipment are monitored continuously on a daily basis, enabling early detection and safe response. 3. Inspection and maintenance of the distribution/control panel equipment can be performed reliably and safely. 4. This is an optimal "distribution board alarm device" for safety measures against abnormal temperatures in distribution/control panel equipment. 5. It is a "distribution board alarm device" that combines a compact alarm panel with a temperature sensing wire (80℃). 6. This product meets the performance standards of a fixed temperature type detector (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80℃), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 4. This product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy, and accurate, utilizing eco-technology with zero standby power through its switching function.

• power supply
• Control Panel
• Distribution Board

New product for temperature sensing wire for monitoring abnormal temperatures of electrical wires in electrical equipment.

■Features of Temperature Sensing Wires for Electric Cables 1. Attach the temperature sensing wire for electric cables to the electric wire using a spiral tube or similar method to monitor abnormal temperatures in the wire. 2. Attach the temperature sensing wire for electric cables to control devices and load devices using plastic bonds to monitor abnormal temperatures in the equipment. 3. Detect abnormal temperatures in electric equipment's wires, control devices, and load devices, preventing equipment damage and fires in advance. 4. Continuously monitor abnormal temperatures in electric equipment on a daily basis, ensuring reliable and safe maintenance management. 5. Safety management of electric equipment can be performed even by those who are not electrical engineers. ■Characteristics of Temperature Sensing Wires for Electric Cables 1. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Wiring similar to that of electric equipment can be performed. Additionally, it can be used for both indoor and outdoor wiring.

• power supply
• Control Panel
• Distribution Board

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. Direct temperature sensing and signal generation through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Various abnormal temperatures can be monitored collectively on a daily basis, ensuring reliable and safe maintenance management. 4. Early detection of abnormal temperatures in various devices can prevent equipment damage and fires. 5. By simply extending the wiring, a wide range of abnormal temperature monitoring can be achieved. 6. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 7. This product integrates numerous shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

Detect abnormal temperatures in distribution board equipment / Temperature detection sensor for distribution boards

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once triggered, it cannot be reactivated. The activated location can be deleted and reconnected.)

• power supply
• Control Panel
• Distribution Board

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

"Because it's an invisible place, we won't overlook it." Japan's climate is characterized by high temperatures and humidity, and particularly after typhoons and heavy rains, the conditions can be harsh for homes. It's not just the roofs and exterior walls that are affected by rain and wind. The area beneath the floor is actually the most susceptible and often overlooked point. This time, we will explain the "checkpoints for under the floor" that should be confirmed after a typhoon or heavy rain, the "responses" if abnormalities are found, and measures for preventing recurrence. [Table of Contents] ■ Why is underfloor checking necessary? ■ Checkpoints to confirm after a typhoon or heavy rain ■ Responses when damage is discovered ■ Points for preventing recurrence ■ Suggestions from Seihou Products ■ Summary Please be sure to read the [related materials] and [related links]. ↓ ↓ ↓

Explosion-proof motors available in stock We will deliver within 7 days to meet your delivery schedule. 【What is an explosion-proof motor?】 In factories and plants, flammable gases and vapors are present. When these mix with air and come into contact with an ignition source, an explosion or fire can occur. This motor is designed with measures to eliminate such ignition sources. 【Available stock models】 ■ Pressure-resistant explosion-proof motors, explosion-proof grade d2G4 - Foot-mounted type, output 0.4 to 3.7 kW, 4 poles - Flange type, output 0.4 to 0.75 kW, 4 poles ■ Increased safety explosion-proof motors, explosion-proof grade eG3 - Foot-mounted type, output 0.2 to 0.75 kW, 2 and 4 poles - Flange type, output 0.2 to 0.75 kW, 2 and 4 poles

As part of the "Hometown Ibara Future Creation Human Resource Development Project," we welcomed local elementary and middle school students to the special summer program "Ibara Job Exploration Tour 2025," a collaboration between the Ibara City Chamber of Commerce and the Corporate Branding Committee. We conducted a presentation that clearly and enjoyably introduced how our technology supports society, allowing the children to learn about the appeal of manufacturing and the significance of working while interacting with actual devices and products. Through this initiative, we hope to deepen our connection with the community and nurture the curiosity of the children who will carry the future. We sincerely thank everyone who participated, as well as all those involved in planning and organizing the event.

We will disclose the interim financial results for the fiscal period ending December 2025.