[DKSH Japan Co., Ltd.] Notice of Participation in the 48th Safety Engineering Research Presentation Conference

High-pressure measurements up to 50 MPa are possible! A series of calorimeters used in a wide range of fields.

The "Kalbe-type Calorimeter Series" is a calorimeter manufactured by SETARAM that combines the features of high-sensitivity isothermal measurements and thermal analysis device DSC for temperature rise measurements. You can choose devices within a temperature range from low temperatures (-196℃) to high temperatures (1000℃), and various measurements are possible with dedicated sample equipment. It is used in a wide range of fields, including chemistry, energy, food, and process safety evaluation. 【Features】 ■ Capable of high-pressure measurements up to 50MPa (High-pressure containers can comply with high-pressure gas safety regulations) ■ Monitoring of pressure changes inside the container is possible ■ Measurements can also be conducted in corrosive gas or water vapor atmospheres ■ Custom fabrication of various sample containers is possible ■ Usable in a wide range of fields, including process safety evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

It is possible to measure temperatures up to 2400℃.

We have adopted a graphite furnace, achieving a compact desktop-sized device with a maximum temperature of 2400°C. By combining protective tubes and temperature sensors within the furnace, measurements can be taken in various atmospheres, including air, oxygen, and hydrogen, in addition to inert gases.

• Other physicochemical equipment
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Standard model of thermal analysis equipment.

The unique tungsten furnace developed by SETARAM enables a compact, maintenance-free design that does not require protective gas. It allows for TGA, (TG-)DTA, (TG-)DSC, and high-precision Cp measurements at temperatures up to 1,600°C. Due to the small sample atmosphere, inert gas replacement can be performed without vacuum replacement, preventing oxidation of the sample.

• Other physicochemical equipment
• Analytical Equipment and Devices

Continuous heating and cooling measurements are possible in the range of 45℃ to 120℃.

SETARAM has combined its unique Calvet method with semiconductor sensors to achieve high-sensitivity DSC measurements with excellent operability. The main reason why Micro-DSC can be used for a wide range of applications is that, despite being ultra-high sensitivity DSC, the sample container can be removed separately from the detection area. The micro DSC7 evo is equipped with 3D Calvet sensor technology and is designed for research on crude oil, emulsions, biopolymers, carbohydrates, and more.

• Other physicochemical equipment
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

High-sensitivity measurement of thermal energy and weight changes is possible with a unique 3D sensor.

The CALVET PRO, a DSC designed with SETARAM's unique 3D sensor, achieves the operability of a general-purpose DSC and high-sensitivity measurements with a large sample container. By simply exchanging the sample container, it allows for high-pressure DSC measurements up to 50 MPa (600°C), and by adding a suspended balance (optional), it enables simultaneous high-sensitivity measurements of heat flow and weight changes as a TG/DSC. Additionally, the CALVET PRO DSC can be equipped with an optional robotic sample exchange mechanism (48 samples), enabling unmanned operation.

• Other physicochemical equipment
• Analytical Equipment and Devices

At the Dry Fog Humidification System Free Demo Experience, you will have the opportunity to actually experience our Dry Fog, as well as our single-fluid and dual-fluid humidifiers. We will explain the differences from conventional humidifiers and the effects of implementation. In addition to introducing the latest case studies, we will also provide time for you to consult directly with our specialized staff. Please select a convenient venue and date from the application page and apply. * The "morning session" and "afternoon session" contain the same content. Please participate at a time that suits you. * This event is intended for users only. Participation from trading companies, other companies in the same industry, or for sales purposes to our company is not permitted. Venues: ■ Yamagata Venue: 3/12 (Wed) at Yamagata International Exchange Plaza 3/13 (Thu) at Sakata Chamber of Commerce and Industry ■ Sendai Venue: 3/14 (Fri) at Kiri no Ikeuchi Sendai Branch ■ Tokyo Venue & Osaka Venue: 3/18 (Tue), 3/19 (Wed), 3/21 (Fri) at Kiri no Ikeuchi Tokyo Sales Office & Kiri no Ikeuchi Osaka Headquarters ■ Nagoya Venue & Fukuoka Venue: 4/9 (Wed), 4/10 (Thu), 4/11 (Fri) at Kiri no Ikeuchi Nagoya Sales Office & Kiri no Ikeuchi Fukuoka Sales Office

[Speaker] Mr. Manabu Kamitani, Manager, Performance Unit, Arthur D. Little Japan K.K. [Key Lecture Content] In recent years, both quantum technology and AI have seen technological development and investment at the national level, not just by companies, in various countries. While private enterprises are advancing the verification of the potential and promise of both quantum and AI technologies, the societal penetration of these technologies differs due to the uncertainty of their evolution. This has led to a demand for advanced technological intelligence capabilities that balance the maturity of the technology with expectations for its application in business development and internal implementation based on cutting-edge technologies. This lecture will multifacetedly examine the key points of how to utilize developing advanced technologies, taking into account the current understanding and future direction of quantum technology and AI. [Lecture Items] 1. Current status of the utilization of quantum technology and AI 2. Future development directions of quantum technology and AI and challenges toward realization 3. Considerations for business development and planning for advanced technologies based on the current status and challenges 4. Summary of today's discussion 5. Q&A / Business card exchange

[Speaker] Takayuki Furuta, Director of the Future Robot Technology Research Center (fuRo), Executive Director of Chiba Institute of Technology [Key Lecture Content] The true value of robotic technology lies in its ability to directly impact the physical world, creating tangible value for society, from economic activities to people's daily lives. This lecture will focus on the evolution of robotic technology as a core system that connects cyberspace and the real world, introducing development examples of AI-equipped mobility. Furthermore, while considering the latest trends in robotic technology being utilized in real society, we will explore the future direction and potential of technological development. Additionally, we will indicate the direction that Japan's industry and technology should aim for in the future and reflect on the grand design of society and technology necessary for its realization. [Lecture Items] 1. The essence of robotic technology and its social value 2. The fusion of AI and robotics 3. Development examples of AI mobility 4. How robotic technology is transforming industry and society 5. The grand design of Japan's technology and industry 6. Q&A / Business card exchange *The lecture content may be subject to change based on the latest trends.

[Speaker] Tetsuji Narita, President of NRT Energy Bridge Co., Ltd. [Key Lecture Content] Due to the rapid expansion of AI data centers, the power system is transitioning from "ensuring quantity" to "simultaneous design of reliability, environmental value, and construction period." While the government is taking steps to ensure system capacity in collaboration with watt-bit and in GX strategy regions, on-site, different entities such as DC operators, retailers, power generation and storage, local governments, and transmission companies tend to operate in different languages. This lecture will organize the current state of the system from PPA to practical design of power source portfolios, providing a checklist for each stakeholder and a common language to "operate on the same schedule." [Lecture Items] 1. Overall Overview: Structural organization of how AI DC has become a "design variable" in the power system 2. Current state of watt-bit collaboration and connection discipline 3. GX strategy regions (DC aggregation type): Issues in industrial cluster design 4. Practical design of PPA and power source portfolio 5. Preparation for environmental value and 24/7 CFE 6. Summary: Stakeholder-specific checklist and common schedule 7. Q&A / Business card exchange

[Speaker] Kazuhiro Kaiho, Manager, Environmental, Energy, and Resource Strategy Group, Research and Consulting Division, Japan Research Institute, Ltd. [Key Lecture Content] Decarbonization of automobiles is entering a phase where EVs, hydrogen, and RNG are utilized according to the industrial structure of countries and regions, energy resources such as renewable energy and biomass, and infrastructure constraints, rather than being solely focused on EVs. This presentation will compare the U.S. tax credits, LCFS, and RFS; China's NEV promotion policies and hydrogen demonstrations; and Europe's RED III and AFIR, organizing which fuels each region is aiming to expand for which applications. It will highlight different winning strategies for passenger and commercial vehicles and provide insights for Japanese companies. [Lecture Items] 1. Why is it important to view "automotive fuel policy" through regional comparisons now? 2. United States: Expanding RNG, hydrogen, and low-carbon fuels through market incentives. 3. China: A dual-front strategy focusing on EVs while nurturing hydrogen for commercial vehicles. 4. Europe: Advancing EVs, hydrogen, and renewable gas through regulatory leadership. 5. Insights for Japanese companies: What should Japan learn and how should it proceed? 6. Q&A / Business card exchange.