*Finished* *Notice of Participation in the 2016 New Environment Exhibition (N-EXPO 2016 TOKYO) [East 4: T4014] from May 24 to 27*

The size is interchangeable due to compliance with ISO standards. The type that sets parameters via the fieldbus interface has real-time diagnostic capabilities.

The mounted digital driver controls the hydraulic pressure of the valve according to the command signal. The digital hydraulic equipment features high performance with over 20 types of alarms compared to the analog diagnostic function that only provides fault signals. Additionally, due to the use of digital information, it has high resistance to electromagnetic noise and explosion-proof specifications are also available. 【Features of Digital Hydraulic Equipment】 ■ More functions and parameters (e.g., linearization, PID) ■ High reproducibility and numerical soft setting ■ Enhanced diagnostic functions… open circuit detection, control monitoring, temperature range, etc. ■ Direct fieldbus interface 　… improved accuracy and durability, more information available 　… direct connection to the machine's communication network 　… CANopen / PROFIBUS DP / EtherCAT 【Specifications】 ■ Types: Directional control valve, pressure control valve, flow control valve ■ Sizes: 06, 10 (2-stage), 10 - 32 ■ Flow: Maximum 70–3500 L/min ■ Pressure: Maximum 350 bar

• Hydraulic Equipment
• Servo
• Other network tools

Available in "General Steel," "SUS 316," and "Copper Alloy (Medium Pressure)." Widely used in Europe and America.

In addition to standard throttle valves, there are various high-pressure products such as pressure-regulating valves and angle valves, which can be selected according to specifications. The materials include general steel and "high corrosion-resistant" stainless steel "SUS 316," as well as copper alloys suitable for use with hydraulic, water, and air pressure (*medium pressure). You can view a product overview catalog that summarizes the products handled by TOGNELLA and a catalog detailing the SUS 316 products. ● If you would like the catalog immediately, please click "Download Catalog"! ◎ If you prefer a printed version, please contact us.

• valve
• Water Hydraulic Equipment
• Hydraulic Equipment

Low noise and high heat exchange efficiency. Heat exchange equipment that can be used at high pressure.

This catalog features a wide range of heat exchange equipment, including water-cooled coolers (brazed plate type), air-cooled coolers (driven by AC or DC motors, hydraulic motors), and cooling units! 【Features (excerpt) / Air-cooled type】 Maintains heat balance with excellent performance. When used in hydraulic systems, it offers the following advantages: - The cooling system is independent of the water supply line (no water required) - Higher initial investment compared to water-cooled types, but lower running costs - Warm air can be used for heating in winter, among others If you would like the catalog now, please click "Download Catalog"! For a printed version, please contact us. ――――――――――――――――――――――――― ■□ We will be exhibiting at the '2018 New Environmental Exhibition' □■ Exhibition content: ◎ "Fan Plate Oil Cooler" (by Sesino) ◎ "High-Pressure Hydraulic Valve" (by Tognella) We will showcase various hydraulic equipment from different manufacturers, focusing on the above items. We will also distribute various catalogs. Period: May 22 - May 25, 10:00 AM - 5:00 PM Location: Tokyo Big Sight (East Hall 4: U511)

• Other machine elements
• Hydraulic Equipment
• others

Non-spill type that contributes to the prevention of water quality pollution and soil contamination! It prevents oil from leaking externally during attachment and detachment, and allows for attachment and detachment even when there is residual pressure.

The "VEP-HD" allows for safe coupling and uncoupling even with high residual pressure due to its triple valve system. At the same time, it prevents external oil leakage during coupling and uncoupling. It is designed with heavy-duty, high-pressure hydraulic applications in mind, considering high repetitive peak pressures and significant mechanical stress. The "VEP-HD" is made from high-tensile carbon steel and features a nitrided surface treatment that reduces wear on the coupling. This series underwent one million impulse tests during its development. 【Features】 ○ The flat face is easy to clean and effectively reduces contamination intrusion into the system. ○ There is no external leakage of operating oil during coupling and uncoupling, reducing environmental impact. ○ It minimizes air entrapment during coupling and uncoupling, aiding in optimal system operation.

• Coupling

For crushers, augers, drills, and more! The heavy-duty design "S" is the most powerful in the series with 500kW of durability!

The "S" is designed for heavy-duty use to continuously deliver high output, with a maximum output of 500kW. Recommended applications include crushers, augers, drills, and winches, with options for two-stage shifting and freewheeling based on usage. 【Features】 ○ Easy to use as an industrial "shaft rotation type" ○ Tapered roller bearings capable of withstanding high radial/axial loads ○ Automatic switching multi-speed function suitable for many applications

• Other motors
• Hydraulic Equipment

Compact and lightweight hydraulic manifold block. An excellent product that can handle high pressure and environmental conditions.

TSB (TOHTO System Block) is TOHTO's original hydraulic valve control block. The concept is "compact and lightweight" for hydraulic systems. We provide a one-stop solution from design, processing, assembly, to operational testing. Custom manufacturing is available for each specification and circuit diagram. The following are the main manufacturers we handle: *Note that we also handle many other manufacturers beyond those listed below.* - Delta Power - Danfoss - Sun - Bosch Rexroth Oil Control - Tecnord - Atos - Bieri - Brevini - Deltrol - Wandfluh - Walvoil

• valve
• Hydraulic Equipment

Compact size that can be installed in narrow spaces. It supports rotation in both directions, making installation and startup easy! (DIN mount version)

The compact "XPi" pump can be installed in tight spaces and used at high rotational speeds. It is compatible with either direction of rotation depending on the installation position of the suction pipe. Additionally, it features easier installation and startup. It is the DIN version of the "XAi-SAE" series. 【Features】 ○ 7 piston design ○ Automatic adjustment function for valve plate and barrel ○ Use of high-strength materials ○ Reinforced shaft seal ● For more details, please contact us or download the catalog.

• Other pumps
• Hydraulic Equipment

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

【Seminar Overview】 The construction industry faces many challenges, including labor shortages, regulations on working hours, and the need for operational efficiency. Additionally, the aging workforce presents significant issues, and there is a concerning trend of high turnover rates among younger employees who are supposed to carry on the skills and knowledge. In this seminar, we will discuss the causes of turnover based on case studies and explain key points on how advancing IT can help reduce turnover rates.

We will be exhibiting at the "Monozukuri Fair 2025" held at Marine Messe Fukuoka from October 15 (Wednesday) to October 17 (Friday). "For those in the manufacturing industry who want to advance automation and labor-saving but find the knowledge and cost barriers too high..." Mikasa Trading will introduce solutions that are easy to implement at low cost and have high effectiveness. 【Example of Exhibited Product Lineup】 ■ Collaborative Robot Control Solutions ■ Prototype of Stop Detection Solution ■ AI Camera Solutions for Factories ■ Lenovo PCs for factory edge applications with long-term supply, high reliability, and low cost Please come and find hints to solve your on-site challenges!

FUJI is a leading company in atmospheric pressure plasma devices. In recent years, the introduction of atmospheric pressure plasma as a pre-treatment device to improve adhesive strength and quality has been progressing in manufacturing sites. FUJI's plasma device, Tough Plasma, has world-class processing capabilities and can perform continuous processing at high speeds. At this exhibition, we will showcase the latest model of the Tough Plasma series, "ATOM," which operates solely on air and electricity. Please come and see its world-class capabilities, quality, and safety monitoring features. We will also have a corner where you can experience the effects of plasma treatment firsthand with adhesive sample experiences. If you are having trouble with adhesion, please feel free to stop by our booth. During the exhibition, our engineers will be stationed at the booth. They will be happy to answer any questions you may have, from basic knowledge of plasma to the types of materials that can be processed and processing speed estimates, so please feel free to visit us. You can complete pre-registration from the link below [Details & Application].

[Instructor] Mr. Takashi Momiyama Incubation Producer, Innovation Strategy Center, Japan Research Institute, Ltd. [Key Lecture Content] From the perspective of resource security and the creation of new markets, the realization of a circular economy for EV batteries is anticipated. However, in our country, there are still numerous challenges, and the majority of EV batteries are flowing overseas along with used EVs. In recent years, protectionist policies have been promoted in various countries, such as the U.S. tariff policies and China's rare earth export regulations, and there are concerns that if our country delays its response, the outflow will accelerate further. In light of this situation, we will analyze the impact of geopolitical risks on the formation of a circular economy domestically, overview what initiatives the government, local governments, and private companies have been advancing in the country, and propose measures deemed necessary to further accelerate the formation of a circular economy. We look forward to the participation of individuals from a wide range of industries who may be involved as suppliers or users in the circular economy of EV batteries.