Started selling the CMOS IC "7202 Series" for 32.768kHz output crystal oscillator modules.

Achieving low power consumption and miniaturization - Launch of the CMOS IC "7202 Series" for 32.768kHz output crystal oscillator modules.

The 7202 series is a CMOS IC for crystal oscillator modules that incorporates an oscillation circuit for AT-cut quartz crystal oscillators at 16.777216MHz (or 25.165824MHz, 33.554432MHz) and outputs 32.768kHz with a division ratio of 512 (or 768, 1024). It is designed to operate at 125°C. By using an AT-cut crystal, it enables the realization of a 32.768kHz output crystal oscillator with superior frequency temperature characteristics and a shorter oscillation startup time compared to products using tuning fork oscillators. Compared to the conventional model (5059), it reduces power consumption by 90%, shrinks the chip size by 40%, and supports a wide operating supply voltage range (1.6 to 3.63V) and an operating temperature range (-40 to 125°C).

• Other electronic parts
• Dedicated IC

Features ● Equipped with Intel Core Ultra 5 125H ● Dual Channel DDR5 5600MHz × 2 slots (up to 96GB) (sold separately) ● HDMI 2.0 × 4 ● M.2 3042/3052 B-Key × 1, 2230 E-Key × 1, 2280 M-Key × 1 (PCIe Gen4 [x4], NVMe) (sold separately) ● USB 2.0 × 5, USB 3.2 × 3, USB 3.2 Gen 1 (Type-C) × 1 ● LAN × 2 ● 12V DC input power ● OOB (Out-of-Band Management) module compatible: MOD-RMB (via i210-AT) * This model does not include memory, storage, or OS.

Features ● Compatible with Intel Core Ultra 200S series ● DDR5 SODIMM x 2 (up to 96GB) ● PCIe x4 x 1, M.2 3042/52 B-key x 1 ● USB2.0 x 4, USB3.2 Gen2 x 2 (rear I/O), USB3.2 Gen1 x 1, USB2.0 x 1 (pin header) ● SATA 6Gb/s x 2 ● HDMI 2.0 x 2, DP 1.4 x 1 ● DC input 19V ~ 24V * This model does not include memory, storage, or OS.

Features ● Equipped with Intel Processor N97 ● DDR5 SODIMM up to 16GB (sold separately) ● M.2 2280 M-Key x 1 (Auto Detect, PCIe [x1] & SATA Mode), M.2 2230 E-Key x 1, M.2 3042/52 B-Key x 1 ● USB3.2 x 1 (rear I/O), USB2.0 x 4 (pin header) ● PoE x 1, GbE LAN x 1 ● 12V DC input ● OOB onboard * This model does not include memory, storage, or OS.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.