Sales of KCT type tank and HT type tank dedicated carts have begun!

This is a tank created with a new idea that has never existed before.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be attached and detached while the agitator shaft and blades are mounted. Since installation work inside the tank is unnecessary, the position of the agitator blades can be lowered closer to the bottom, allowing for mixing with a small amount of liquid. Additionally, it comes standard with a 50A threaded joint (made of polypropylene). It can be adapted from 50A to 40A, 25A, 20A, and 15A using an eccentric reducer. 【Features】 ■ Easy attachment and detachment of the agitator ■ Easy discharge of slurry ■ Residual liquid of 0.1% ■ Usable for various purposes ■ Three upper pipe seats available *For more details, please refer to the catalog or feel free to contact us.

• tank

Available in 200L and 300L! Bottom sloped tank with a mount for a stirrer on the top plate.

The "HT type" is a unit with a small conical tank (200L, 300L) and a small mixer. Since it is a round tank, the stirring efficiency is significantly improved compared to conventional square tanks. The tank has a sloped bottom, which eliminates residual liquid at the bottom of the tank after cleaning. Both the tank and the frame are made of polyethylene, so there is no concern about corrosion. It has a proven track record for food use as well. 【Features】 ■ Mixer frame can be mounted on the top plate ■ High efficiency and significant savings on running costs (power consumption) ■ Various options available, including liquid level gauges and reinforcement frames ■ Suitable for use as a test plant due to its small capacity ■ Seismic resistance up to 0.6G For more details, please refer to the catalog or feel free to contact us.

• Plastic utensils and containers
• tank

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Last month, we held a spring safety conference hosted by our company. We have compiled the details and atmosphere of the day into a PDF. We would appreciate it if you could take a moment to read it.

In recent years, as the importance of data integrity (DI) compliance in GMP environments has increased, there has been a growing call to deepen understanding of 21 CFR Part 11. This content introduces an on-demand presentation that organizes the background of Part 11, its relationship with DI, and its positioning in CSA guidance, while explaining the basic concepts of electronic records and electronic signatures. ■Content - Background and basic concepts of Part 11 - Relationship with data integrity (DI) - Positioning in CSA guidance - Basic requirements for electronic records/electronic signatures *This content is based on information as of March 17, 2026. *The information provided is intended for general informational purposes and does not guarantee specific compliance or suitability.