[Case Study] Nittoku Machinery Industry Co., Ltd. has adopted our products for their wastewater treatment system.

Adopted for solid-liquid separation treatment equipment for cement-based wastewater! "KCT-100 type + KANKI MIXER" for stirring and discharging the coagulant.

We have adopted multiple products from our company for the wastewater treatment system NIWT series of Nichitoku Machinery Industry Co., Ltd. 【Nichitoku Machinery Industry Co., Ltd. NIWT Series Product Page】 https://www.ipros.jp/product/detail/2000255052 This system enables the treatment of wastewater generated at related facilities such as concrete, cement, ready-mixed concrete, stone, bricks, and ceramics, using a neutral inorganic coagulant for coagulation treatment, allowing the dissolved substances to coagulate and form flocs, and achieving complete solid-liquid separation and neutralization automatically. Our tanks and stirrers are used within the equipment, and the operation panel is attached to the insert nut provided in the tank for use.

• Mixer/agitator
• Wastewater/wastewater treatment equipment
• tank

This is a tank created with a new idea that has never existed before.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be attached and detached while the agitator shaft and blades are mounted. Since installation work inside the tank is unnecessary, the position of the agitator blades can be lowered closer to the bottom, allowing for mixing with a small amount of liquid. Additionally, it comes standard with a 50A threaded joint (made of polypropylene). It can be adapted from 50A to 40A, 25A, 20A, and 15A using an eccentric reducer. 【Features】 ■ Easy attachment and detachment of the agitator ■ Easy discharge of slurry ■ Residual liquid of 0.1% ■ Usable for various purposes ■ Three upper pipe seats available *For more details, please refer to the catalog or feel free to contact us.

• tank

Ideal for pharmaceutical dissolution tanks and coagulation reaction tanks! Lightweight and compact vertical stirrer.

The "Kankimi Mixer KMC Type" features an aluminum body, allowing it to be lightweight, reducing its weight to about 1/3 to 1/2 of conventional models, achieving a compact design for a vertical mixer. It can be placed directly on a resin tank, and the mounting frame for the mixer uses more affordable materials compared to previous models. It can be used for diluting and mixing various liquids such as chemical solutions, as well as for preventing dissolution, sedimentation, and circulating liquids. 【Features】 ■ Lightweight and compact ■ Outdoor motor (40W to 400W three-phase 200V) ■ Adjustable rotation speed according to application ■ Usable for mixing liquids and powders ■ Simple structure for ease of use For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK