Black KCT-type tanks will be available for sale starting this spring!

Demo units available for loan! Unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be easily attached and detached with the agitator's shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The conical bottom allows for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. 【Features】 ■ Easy attachment and detachment of the agitator ■ Drain diameter of 50A for easy discharge of slurry ■ Residual liquid is only 0.1% ■ Can be used for various purposes utilizing the side insert nuts ■ Three upper pipe seats are provided For more details, please refer to the catalog or feel free to contact us.

• Plastic utensils and containers
• tank

Demo units available for loan! The unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a bottom slope that can be easily attached and detached with the stirrer's shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The bottom is conical, allowing for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. 【Features】 ■ Easy attachment and detachment of the stirrer ■ Drain diameter of 50A for easy discharge of slurry liquids ■ Residual liquid is just 0.1% ■ Can be used for various purposes utilizing the side insert nuts ■ Three top pipe seats available For more details, please refer to the catalog or feel free to contact us.

• Plastic utensils and containers
• tank

This is a tank created with a new idea that has never existed before.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be attached and detached while the agitator shaft and blades are mounted. Since installation work inside the tank is unnecessary, the position of the agitator blades can be lowered closer to the bottom, allowing for mixing with a small amount of liquid. Additionally, it comes standard with a 50A threaded joint (made of polypropylene). It can be adapted from 50A to 40A, 25A, 20A, and 15A using an eccentric reducer. 【Features】 ■ Easy attachment and detachment of the agitator ■ Easy discharge of slurry ■ Residual liquid of 0.1% ■ Usable for various purposes ■ Three upper pipe seats available *For more details, please refer to the catalog or feel free to contact us.

• tank

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.