【Technical Information】What is the insulation method for jacket tanks?

Enhances the insulation and cooling effect inside the container, while also suppressing changes in surrounding temperature! Reusable and eco-friendly!

This is an insulated jacket for reusable stainless steel tanks. - It enhances the heat retention and cooling effect of the jacket tank with excellent insulation properties. - It reduces heat radiation from the tank, minimizing changes in the surrounding temperature. - It helps prevent burns and condensation. - It is secured with Velcro or similar materials, making it easy to install and remove, allowing for repeated use. - It can be custom-made to fit the tank.

• Stainless steel container

It is a stainless steel container (with legs) that can be heated or cooled while discharging!

A stainless steel container with a pressure-resistant jacket section The inner tank is a hopper type for easy discharge ○ Water can be circulated through the jacket section (outer tank) to maintain the temperature of the contents. ○ The jacket section can also be used when pressure (0 to 0.18 MPa) is applied. ○ The inner tank has a hopper shape, which provides excellent liquid discharge capability. ○ A separate container for receiving (portioning) can be placed under the discharge outlet at the bottom of the container. This stainless steel container is made to order, allowing for custom processing (customization) according to specific applications such as "dimensions," "materials," and "additional nozzles."

• Stainless steel container

It is a stainless steel container (with legs) that can be heated or cooled while discharging!

A stainless steel container with a pressure-resistant jacket section The inner tank has a bowl shape that excels in stirring and discharging. ○ Water can be circulated in the jacket section (outer tank) to maintain the temperature of the contents or cool them down. ○ The jacket section can also be used when pressure (0 to 0.18 MPa) is applied. ○ The inner tank has a mirror plate shape, making it suitable for stirring and discharging liquids. ○ A separate container for receiving (portioning) can be placed under the discharge outlet at the bottom of the container. ○ As this is a made-to-order product, custom modifications can be made according to changes in "dimensions" and "materials" or for specific applications.

• Stainless steel container

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This is an introduction to "outer diameter film polishing," which is used for ultra-finish machining of various shaft-type workpieces. - Wouldn't you like to achieve ultra-finish machining more easily, safely, and with less variation? Please take a look at what film polishing is, along with related products and catalogs!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.