High-speed rectifier diode capable of high current rating products while maintaining high speed【CTXS-5606S】.

Eight clock outputs that can be set to eight phases.

**Overview** The LTC6909 features eight individual outputs, providing up to eight rail-to-rail 50% duty cycle clock signals. These outputs can be used to enable/disable multiple switching regulators or to achieve phase synchronization. Phase synchronization offers numerous design advantages, including improved EMI performance, reduced input and output ripple current, and enhanced load transient response. Additionally, by using three logic inputs, the phase relationship between these outputs can be set within a range of 45° to 120°, or the outputs can be set to logic "L" or high-impedance state. A single resistor is used to select the output frequency in the range of 12.5 kHz to 6.67 MHz. The LTC6909 also includes a Spectrum Spread Frequency Modulation (SSFM) feature, which is a technique for modulating the clock frequency with a pseudo-random signal. SSFM can be easily enabled and provides a method to reduce peak electromagnetic radiation. The amount of frequency spreading is fixed at ±10% of the center frequency, and the user can select one of three modulation rates.

• Other semiconductors

Dual isolated RS232 μModule transceiver with built-in isolated power supply.

**Overview** The LTM2882 uses signal isolation functionality through inductive elements to break the logic level loop, significantly expanding the common-mode voltage range and achieving an excellent common-mode rejection ratio of over 30kV/μs. It generates a power supply that drives RS232 levels with a low EMI DC-DC converter and provides an additional isolated 5V power output to supply power to any external support components. The LTM2882 features 2,500VRMS galvanic isolation, an auxiliary power supply, and two fully compliant RS232 transmitters and receivers, eliminating the need for external components and providing a complete and compact μModule solution for isolated serial data communication.

• Other semiconductors

16-bit 80Msps ADC with minimum power consumption to reduce noise in the data conversion system.

**Overview** The LTC2259-16 is a pin-compatible upgrade device to the already available low-power 14-bit ADC family LTC2259-14. It achieves the lowest power consumption for a single 16-bit ADC with double data rate (DDR) CMOS/LVDS output. In addition to significant power savings, the LTC2259-16 features two useful functions: alternate bit polarity (ABP) and a data output randomizer, which help reduce digital feedback noise. These features simplify design work using high-speed ADCs in applications such as HD broadcast cameras, IMO radars, Ethernet testers, portable test equipment and measurement instruments, software-defined radios, and cellular base stations.

• Other semiconductors

Rail-to-rail operational amplifier achieving maximum efficiency at 180MHz with 1mA.

The LTC6246/LTC6247/LTC6248 achieves a gain bandwidth of 180MHz and a slew rate of 90V/μs using a power-efficient SiGe process, while keeping the maximum supply current to just 1mA per amplifier. These single, dual, and quad operational amplifiers feature rail-to-rail input and output as well as a wideband noise of 4.2nV/√Hz. The LTC6246/LTC6247/LTC6248 are designed to achieve the highest speed and maximum power efficiency possible for rail-to-rail amplifiers without degrading DC characteristics. The input offset voltage is specified at a maximum of 500μV, and the open-loop gain is 45V/mV.

• Other semiconductors

A low saturation type regulator with a minimum output voltage of 0.8V, enhanced analog characteristics such as output voltage accuracy and load stability.

Io=500mA Low Output Voltage Low Saturation Regulator Despite a minimum output voltage of 0.8V, this low saturation regulator enhances analog characteristics such as output voltage accuracy and load stability. 【Overview】 The NJM2841 is a low saturation regulator that supports low output voltages down to 0.8V. Utilizing a bipolar process, it achieves low noise and high ripple rejection, while supplying a separate power source (VBIAS) for the control circuit, ensuring good load stability and transient response even during low input-output voltage operation. This makes it ideal for core voltage supply applications in digital devices such as CPUs, DSPs, and ASICs. It is housed in a compact SOT-23-5 package with an output current of 500mA, and is compatible with small 4.7μF ceramic capacitors, allowing for a reduction in mounting area.

• Other semiconductors

Contributed to reducing the development costs of cradle speakers and improving stereo sound quality.

eala Stereo Expander with Push Button Interface Electronic Volume 【Overview】 The NJU7392 is an electronic volume with a built-in push button interface and eala Stereo Expander. This product features a dual-input selector, sound field adjustment function compatible with closely spaced speakers (eala Stereo Expander), push button electronic volume, and a bass boost function with a limiter. Additionally, the standby function allows for reduced power consumption of the set. Various modes can be controlled via push buttons or switches, eliminating the need for a microcontroller. It is ideal for applications such as cradle speakers for portable audio players and handheld gaming devices where speaker spacing is narrow.

• Other semiconductors

Audio stereo A/D converter supports a sampling frequency of fs=8kHz to 192kHz while achieving low power consumption.

**Overview** The NJU3610 is a stereo A/D converter that supports sampling frequencies from 8 to 192 kHz, utilizing 1-bit ΔΣ technology to achieve high precision and low power consumption. The input circuit features fully differential inputs and is equipped with a stereo 4-to-1 selector. It can operate with dual power supplies of 1.8V/3.3V or a single power supply of 3.3V. The NJU3610 is ideal for various consumer audio devices such as digital TVs, soundbars, and speaker systems.

• Other semiconductors

Low voltage operation video amplifier with built-in LPF.

Overview: The NJM2561A is a low-voltage video amplifier with a built-in low-pass filter (LPF). It operates at a supply voltage of 2.6 to 5.5V, allowing for low-voltage operation, and features a built-in 75Ω driver circuit, enabling direct connection to video equipment such as TV monitors. The input supports composite video signals and includes a mute circuit that also serves power-saving functions, making it suitable for low power consumption designs. Additionally, its compact package (ESON6) makes it ideal for portable devices such as DSCs, DVCs, and surveillance cameras.

• Other semiconductors

Analog input filterless monaural 1.5W output Class D power amplifier

Low voltage operation, filterless output, and 1.5W output make it ideal for battery-powered device speaker amplifiers. 【Overview】 The NJU8758 is a filterless Class D power amplifier that operates over a wide range from 1.8V to 5.5V. The output is in a BTL configuration, eliminating the need for coupling capacitors and providing an output of 1.5W. Additionally, since an output LC filter is not required, the number of external components can be reduced. The output terminals are equipped with a built-in short-circuit protection circuit that protects the IC during short circuits between the output terminals and between the output terminals and ground. With its Class D operation, it offers high power efficiency, making it ideal for small consumer devices such as security equipment, portable devices, portable audio equipment, and laptops.

• Other semiconductors

We are lined up according to the measurement distance.

The demand for body detection sensors in machines is expected to expand. Additionally, if it is an analog output type, it can detect the distance between the target (person) and the sensor in an analog manner, which can also be used to determine behaviors such as "getting closer to the sensor." 【Product Lineup】 Distance Measuring Sensor

• Sensors
• Image analysis software
• Other FA equipment

Even transparent objects can reflect, so it can be applied to things that cannot be detected by light.

The MKT Taisei's splash-proof airborne ultrasonic sensor emits ultrasonic waves into the air and receives reflected waves from objects to measure the presence of objects or the distance to them. It is compact, lightweight, robust, and features high sound pressure and high sensitivity. It has low power consumption and excellent environmental resistance. 【Product Lineup】 Splash-proof airborne ultrasonic sensor

• Sensors
• Analytical Equipment and Devices
• Other process controls

We can provide a wide range of proposals tailored to your needs.

【Product Lineup】 Phototransistor Photodiode Photointerrupter Photocoupler Phototriac Coupler Solid State Relay Remote Control Receiver Module IrDA Communication Module

• Other semiconductors
• Other processing machines
• Commercial printers

Replace with silicone! Maintains high-speed switching even at high temperatures, reducing power loss!

The "SiC-SBD series" is a Schottky barrier diode made from SiC (silicon carbide) material. It supports low resistance and high-speed switching, which can reduce switching losses. Additionally, it can operate stably at high temperatures, enabling the miniaturization of power devices. It is effective in high-speed switching applications such as PFC circuits, motor drive circuits, and inverter circuits. 【Features】 ■ Reduction of switching losses due to high-speed switching characteristics ■ Improvement of power conversion efficiency and capability for high frequency ■ Reduction of leakage current at high temperatures ■ Prevention of thermal runaway due to increased current *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

We can provide a wide range of proposals tailored to your needs.

The light sensor from New Japan Radio is equipped with a visual sensitivity correction filter. It is less susceptible to infrared interference and has good linearity over a wide range of illuminance (0.1 to 100,000 Lux). It supports a peak sensitivity wavelength of 560 nm, a sensitivity wavelength range of 350 to 650 nm, a photocurrent of 270 nA ± 15%, and an illuminance detection range of 0.1 to 100,000 Lux (conditions: VR=0V, Ta=25°C). 【Product Lineup】 Light Sensor

• Sensors
• Lighting for image processing
• Other lighting equipment

We provide high value-added programmable solutions to over 13,000 customers worldwide.

Altera's FPGAs continue to lead innovation in programmable logic. They are programmable solutions with high added value, integrating FPGA, CPLD, and HardCopy ASIC with development software, IP (Intellectual Property), and customer support. 【Product Lineup】 FPGA CPLD

• Other semiconductors
• Signal Generator
• Image Processing Equipment

We can provide a wide range of proposals tailored to your needs.

【Product Lineup】 Operational Amplifiers Video Amplifiers Audio Amplifiers Comparators A/D Converters D/A Converters Analog Switches Digital Potentiometers Linear Regulators Switching Regulators DC/DC Converters Reset ICs Battery Chargers References ICs for Crystal Oscillators Silicon Oscillators RS232, RS485, RS422 Interfaces LED Drivers LCD Drivers Motor Drivers Wireless Modules (Bluetooth, Wireless LAN, GPS)

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

We would like to introduce "Chibi 0.3" handled by FCR and Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 0.3ml). It is autoclavable and suitable for DMSO and liquid nitrogen vapor. We also offer screw caps for 96-well plates. 【Features】 ■ Polypropylene ■ Autoclavable ■ Compatible with DMSO ■ Suitable for liquid nitrogen vapor *For more details, please download the PDF or feel free to contact us.

The low-voltage fuse "SBFW-L M6" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. In automobiles, it is particularly effective for devices where the current momentarily increases significantly. It is recommended for those facing challenges related to circuit protection with low-voltage fuses (below DC70V) in the automotive and construction machinery industries. It plays a role in protecting the entire vehicle during abnormal conditions in circuits that supply power from the battery to the entire vehicle and in the power supply system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.