OLINAS News: No. 088 CUI Small AC-DC Power Supply "PSK Series" 6W~20W

Eight clock outputs that can be set to eight phases.

**Overview** The LTC6909 features eight individual outputs, providing up to eight rail-to-rail 50% duty cycle clock signals. These outputs can be used to enable/disable multiple switching regulators or to achieve phase synchronization. Phase synchronization offers numerous design advantages, including improved EMI performance, reduced input and output ripple current, and enhanced load transient response. Additionally, by using three logic inputs, the phase relationship between these outputs can be set within a range of 45° to 120°, or the outputs can be set to logic "L" or high-impedance state. A single resistor is used to select the output frequency in the range of 12.5 kHz to 6.67 MHz. The LTC6909 also includes a Spectrum Spread Frequency Modulation (SSFM) feature, which is a technique for modulating the clock frequency with a pseudo-random signal. SSFM can be easily enabled and provides a method to reduce peak electromagnetic radiation. The amount of frequency spreading is fixed at ±10% of the center frequency, and the user can select one of three modulation rates.

• Other semiconductors

Dual isolated RS232 μModule transceiver with built-in isolated power supply.

**Overview** The LTM2882 uses signal isolation functionality through inductive elements to break the logic level loop, significantly expanding the common-mode voltage range and achieving an excellent common-mode rejection ratio of over 30kV/μs. It generates a power supply that drives RS232 levels with a low EMI DC-DC converter and provides an additional isolated 5V power output to supply power to any external support components. The LTM2882 features 2,500VRMS galvanic isolation, an auxiliary power supply, and two fully compliant RS232 transmitters and receivers, eliminating the need for external components and providing a complete and compact μModule solution for isolated serial data communication.

• Other semiconductors

16-bit 80Msps ADC with minimum power consumption to reduce noise in the data conversion system.

**Overview** The LTC2259-16 is a pin-compatible upgrade device to the already available low-power 14-bit ADC family LTC2259-14. It achieves the lowest power consumption for a single 16-bit ADC with double data rate (DDR) CMOS/LVDS output. In addition to significant power savings, the LTC2259-16 features two useful functions: alternate bit polarity (ABP) and a data output randomizer, which help reduce digital feedback noise. These features simplify design work using high-speed ADCs in applications such as HD broadcast cameras, IMO radars, Ethernet testers, portable test equipment and measurement instruments, software-defined radios, and cellular base stations.

• Other semiconductors

Rail-to-rail operational amplifier achieving maximum efficiency at 180MHz with 1mA.

The LTC6246/LTC6247/LTC6248 achieves a gain bandwidth of 180MHz and a slew rate of 90V/μs using a power-efficient SiGe process, while keeping the maximum supply current to just 1mA per amplifier. These single, dual, and quad operational amplifiers feature rail-to-rail input and output as well as a wideband noise of 4.2nV/√Hz. The LTC6246/LTC6247/LTC6248 are designed to achieve the highest speed and maximum power efficiency possible for rail-to-rail amplifiers without degrading DC characteristics. The input offset voltage is specified at a maximum of 500μV, and the open-loop gain is 45V/mV.

• Other semiconductors

A low saturation type regulator with a minimum output voltage of 0.8V, enhanced analog characteristics such as output voltage accuracy and load stability.

Io=500mA Low Output Voltage Low Saturation Regulator Despite a minimum output voltage of 0.8V, this low saturation regulator enhances analog characteristics such as output voltage accuracy and load stability. 【Overview】 The NJM2841 is a low saturation regulator that supports low output voltages down to 0.8V. Utilizing a bipolar process, it achieves low noise and high ripple rejection, while supplying a separate power source (VBIAS) for the control circuit, ensuring good load stability and transient response even during low input-output voltage operation. This makes it ideal for core voltage supply applications in digital devices such as CPUs, DSPs, and ASICs. It is housed in a compact SOT-23-5 package with an output current of 500mA, and is compatible with small 4.7μF ceramic capacitors, allowing for a reduction in mounting area.

• Other semiconductors

Contributed to reducing the development costs of cradle speakers and improving stereo sound quality.

eala Stereo Expander with Push Button Interface Electronic Volume 【Overview】 The NJU7392 is an electronic volume with a built-in push button interface and eala Stereo Expander. This product features a dual-input selector, sound field adjustment function compatible with closely spaced speakers (eala Stereo Expander), push button electronic volume, and a bass boost function with a limiter. Additionally, the standby function allows for reduced power consumption of the set. Various modes can be controlled via push buttons or switches, eliminating the need for a microcontroller. It is ideal for applications such as cradle speakers for portable audio players and handheld gaming devices where speaker spacing is narrow.

• Other semiconductors

Audio stereo A/D converter supports a sampling frequency of fs=8kHz to 192kHz while achieving low power consumption.

**Overview** The NJU3610 is a stereo A/D converter that supports sampling frequencies from 8 to 192 kHz, utilizing 1-bit ΔΣ technology to achieve high precision and low power consumption. The input circuit features fully differential inputs and is equipped with a stereo 4-to-1 selector. It can operate with dual power supplies of 1.8V/3.3V or a single power supply of 3.3V. The NJU3610 is ideal for various consumer audio devices such as digital TVs, soundbars, and speaker systems.

• Other semiconductors

Low voltage operation video amplifier with built-in LPF.

Overview: The NJM2561A is a low-voltage video amplifier with a built-in low-pass filter (LPF). It operates at a supply voltage of 2.6 to 5.5V, allowing for low-voltage operation, and features a built-in 75Ω driver circuit, enabling direct connection to video equipment such as TV monitors. The input supports composite video signals and includes a mute circuit that also serves power-saving functions, making it suitable for low power consumption designs. Additionally, its compact package (ESON6) makes it ideal for portable devices such as DSCs, DVCs, and surveillance cameras.

• Other semiconductors

Analog input filterless monaural 1.5W output Class D power amplifier

Low voltage operation, filterless output, and 1.5W output make it ideal for battery-powered device speaker amplifiers. 【Overview】 The NJU8758 is a filterless Class D power amplifier that operates over a wide range from 1.8V to 5.5V. The output is in a BTL configuration, eliminating the need for coupling capacitors and providing an output of 1.5W. Additionally, since an output LC filter is not required, the number of external components can be reduced. The output terminals are equipped with a built-in short-circuit protection circuit that protects the IC during short circuits between the output terminals and between the output terminals and ground. With its Class D operation, it offers high power efficiency, making it ideal for small consumer devices such as security equipment, portable devices, portable audio equipment, and laptops.

• Other semiconductors

Single-phase/three-phase specifications, compatible with high currents. Used for high-frequency noise countermeasures (up to 1GHz).

The noise filters from Shōshin Electric are widely used not only in industrial equipment such as semiconductor manufacturing devices and machine tools but also in equipment that supports a comfortable lifestyle, such as air conditioning systems and elevators, contributing to advancements in environmental and energy-saving technologies. MARUWA's through-type EMI filters have a central terminal that serves as the current flow path and is connected internally without any junctions, allowing for a high permissible current of up to 15A (φ1.0) and down to 5A (φ0.65) for DC lines. They are ideal for EMI countermeasures in DC lines and signal lines for mobile phone base stations, microwave repeaters, measuring instruments, and more. 【Product Lineup】 EMI Filters

• filter
• Injection Molding Machine
• Stepper

It is a compact, high-reliability, high-performance filter.

The main application is imaging equipment. JPC's LC filters are compact, high-performance filters developed for broadcasting and communication equipment. They can be made with a small mounting area. 【Product Lineup】 LC Filters

• filter
• Image Processing Board
• Image analysis software

We can provide a wide range of proposals tailored to your needs.

【Product Lineup】 Phototransistor Photodiode Photointerrupter Photocoupler Phototriac Coupler Solid State Relay Remote Control Receiver Module IrDA Communication Module

• Other semiconductors
• Other processing machines
• Commercial printers

Replace with silicone! Maintains high-speed switching even at high temperatures, reducing power loss!

The "SiC-SBD series" is a Schottky barrier diode made from SiC (silicon carbide) material. It supports low resistance and high-speed switching, which can reduce switching losses. Additionally, it can operate stably at high temperatures, enabling the miniaturization of power devices. It is effective in high-speed switching applications such as PFC circuits, motor drive circuits, and inverter circuits. 【Features】 ■ Reduction of switching losses due to high-speed switching characteristics ■ Improvement of power conversion efficiency and capability for high frequency ■ Reduction of leakage current at high temperatures ■ Prevention of thermal runaway due to increased current *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

We can provide a wide range of proposals tailored to your needs.

Product Lineup Power Transformer Transformer for Switching Power Supply

• transformer
• Semiconductor inspection/test equipment
• power supply

We can provide a wide range of proposals tailored to your needs.

Product Lineup Communication and Transmission Transformers High-Frequency Transformers

• transformer
• Communications
• Other network tools

We can provide a wide range of proposals tailored to your needs.

MARUWA's bead inductors are broadly divided into two categories. The chip beads for power lines are products that significantly increase the allowable current while maintaining the function of reducing noise components by lowering the Rdc of signal line chip beads. The chip beads for signal lines are SMD versions that cover a wide range of impedance characteristics, from impedance elements to toroidal chips. 【Product Lineup】 Bead Inductors

• transformer
• Embedded applications for mobile phones and PDAs
• Communications

It achieves a compact size of 7.3 x 6.6 mm and a low profile (maximum 3.0 mm), saving space.

It achieves low loss and high saturation current. It is mainly used in servers, routers, high-speed drive DC/DC converters, and CPU power supplies for PCs. Sagami Electric's power inductors are closed magnetic circuit type surface mount power inductors. They are optimal as choke coils for power supplies. 【Product Lineup】 Power Inductors

• transformer
• PLC
• power supply

We can provide a wide range of proposals tailored to your needs.

【Product Lineup】 Operational Amplifiers Video Amplifiers Audio Amplifiers Comparators A/D Converters D/A Converters Analog Switches Digital Potentiometers Linear Regulators Switching Regulators DC/DC Converters Reset ICs Battery Chargers References ICs for Crystal Oscillators Silicon Oscillators RS232, RS485, RS422 Interfaces LED Drivers LCD Drivers Motor Drivers Wireless Modules (Bluetooth, Wireless LAN, GPS)

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

In the latest "Age Estimation Evaluation Test" conducted by NIST, the AI facial recognition engine "FaceMe" ranked 5th in the world. 【What is the NIST FATE Age Estimation Evaluation Test?】 The NIST FATE Age Estimation Evaluation Test is one of the international benchmarks for facial analysis technology conducted by the National Institute of Standards and Technology (NIST) in the United States, which evaluates the age estimation accuracy of AI algorithms using a large-scale facial image dataset. 【Evaluation Results of FaceMe】 - World Ranking: 5th FaceMe ranked 5th among 20 global vendors, demonstrating top-class accuracy in an international competitive environment. - Mean Absolute Error (MAE): 2.87 years The average error in FaceMe's estimated age is 2.87 years, with only a 0.35-year difference from the top-ranked algorithm, achieving world-class accuracy. *MAE (Mean Absolute Error): Quantifies the error in estimated age (the smaller the number, the higher the accuracy). *NIST conducted the evaluation using 1 million facial images of individuals aged 18 to 30.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.