The latest catalog has been renewed for the "Clean Bench NS Series" and "Incubator BL Series."

Pursuing cost performance while maintaining the high performance and operability of the popular BL series.

By installing the operation module on the outer door, it is possible to reduce the installation area and also use a two-tier stacking system. 【Features】 ○ Chamber structure. A triple insulation structure using a water jacket, expanded polystyrene, and glass wool to maintain constant temperature conditions inside the chamber. *The NS-502 has a double insulation structure. ○ Prevention of contamination. The internal circulation is designed as vertical laminar flow to prevent the mixing of outside air, and the internal circulation fan automatically stops when the outer door is opened or closed. Additionally, the design of the front drip wall, the corners are rounded, and the removable shelves and shelf supports can be easily removed for cleaning and other maintenance. (Note) The internal circulation fan of the BL-42CD/MD does not automatically stop. The NS-502 does not have a fan and relies on natural convection. ○ Humidification method. You can choose either the natural evaporation method or the method of using a humidification water tray, or directly injecting water into the chamber. ● For other functions and details, please contact us.

• Other physicochemical equipment

The nitrogen gas cylinder is no longer needed.

●As long as there is power, it generates high-concentration 99.9% nitrogen gas. ●It operates quietly with minimal vibration, so it won't be a concern in the laboratory.

• Nitrogen Gas Generator

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!