[Sunken Electric New Product Information] AC/DC Converter IC with switchable standby operation points "STR6A100MV/HVD Series"

Eight clock outputs that can be set to eight phases.

**Overview** The LTC6909 features eight individual outputs, providing up to eight rail-to-rail 50% duty cycle clock signals. These outputs can be used to enable/disable multiple switching regulators or to achieve phase synchronization. Phase synchronization offers numerous design advantages, including improved EMI performance, reduced input and output ripple current, and enhanced load transient response. Additionally, by using three logic inputs, the phase relationship between these outputs can be set within a range of 45° to 120°, or the outputs can be set to logic "L" or high-impedance state. A single resistor is used to select the output frequency in the range of 12.5 kHz to 6.67 MHz. The LTC6909 also includes a Spectrum Spread Frequency Modulation (SSFM) feature, which is a technique for modulating the clock frequency with a pseudo-random signal. SSFM can be easily enabled and provides a method to reduce peak electromagnetic radiation. The amount of frequency spreading is fixed at ±10% of the center frequency, and the user can select one of three modulation rates.

• Other semiconductors

Dual isolated RS232 μModule transceiver with built-in isolated power supply.

**Overview** The LTM2882 uses signal isolation functionality through inductive elements to break the logic level loop, significantly expanding the common-mode voltage range and achieving an excellent common-mode rejection ratio of over 30kV/μs. It generates a power supply that drives RS232 levels with a low EMI DC-DC converter and provides an additional isolated 5V power output to supply power to any external support components. The LTM2882 features 2,500VRMS galvanic isolation, an auxiliary power supply, and two fully compliant RS232 transmitters and receivers, eliminating the need for external components and providing a complete and compact μModule solution for isolated serial data communication.

• Other semiconductors

16-bit 80Msps ADC with minimum power consumption to reduce noise in the data conversion system.

**Overview** The LTC2259-16 is a pin-compatible upgrade device to the already available low-power 14-bit ADC family LTC2259-14. It achieves the lowest power consumption for a single 16-bit ADC with double data rate (DDR) CMOS/LVDS output. In addition to significant power savings, the LTC2259-16 features two useful functions: alternate bit polarity (ABP) and a data output randomizer, which help reduce digital feedback noise. These features simplify design work using high-speed ADCs in applications such as HD broadcast cameras, IMO radars, Ethernet testers, portable test equipment and measurement instruments, software-defined radios, and cellular base stations.

• Other semiconductors

Rail-to-rail operational amplifier achieving maximum efficiency at 180MHz with 1mA.

The LTC6246/LTC6247/LTC6248 achieves a gain bandwidth of 180MHz and a slew rate of 90V/μs using a power-efficient SiGe process, while keeping the maximum supply current to just 1mA per amplifier. These single, dual, and quad operational amplifiers feature rail-to-rail input and output as well as a wideband noise of 4.2nV/√Hz. The LTC6246/LTC6247/LTC6248 are designed to achieve the highest speed and maximum power efficiency possible for rail-to-rail amplifiers without degrading DC characteristics. The input offset voltage is specified at a maximum of 500μV, and the open-loop gain is 45V/mV.

• Other semiconductors

A low saturation type regulator with a minimum output voltage of 0.8V, enhanced analog characteristics such as output voltage accuracy and load stability.

Io=500mA Low Output Voltage Low Saturation Regulator Despite a minimum output voltage of 0.8V, this low saturation regulator enhances analog characteristics such as output voltage accuracy and load stability. 【Overview】 The NJM2841 is a low saturation regulator that supports low output voltages down to 0.8V. Utilizing a bipolar process, it achieves low noise and high ripple rejection, while supplying a separate power source (VBIAS) for the control circuit, ensuring good load stability and transient response even during low input-output voltage operation. This makes it ideal for core voltage supply applications in digital devices such as CPUs, DSPs, and ASICs. It is housed in a compact SOT-23-5 package with an output current of 500mA, and is compatible with small 4.7μF ceramic capacitors, allowing for a reduction in mounting area.

• Other semiconductors

Contributed to reducing the development costs of cradle speakers and improving stereo sound quality.

eala Stereo Expander with Push Button Interface Electronic Volume 【Overview】 The NJU7392 is an electronic volume with a built-in push button interface and eala Stereo Expander. This product features a dual-input selector, sound field adjustment function compatible with closely spaced speakers (eala Stereo Expander), push button electronic volume, and a bass boost function with a limiter. Additionally, the standby function allows for reduced power consumption of the set. Various modes can be controlled via push buttons or switches, eliminating the need for a microcontroller. It is ideal for applications such as cradle speakers for portable audio players and handheld gaming devices where speaker spacing is narrow.

• Other semiconductors

Audio stereo A/D converter supports a sampling frequency of fs=8kHz to 192kHz while achieving low power consumption.

**Overview** The NJU3610 is a stereo A/D converter that supports sampling frequencies from 8 to 192 kHz, utilizing 1-bit ΔΣ technology to achieve high precision and low power consumption. The input circuit features fully differential inputs and is equipped with a stereo 4-to-1 selector. It can operate with dual power supplies of 1.8V/3.3V or a single power supply of 3.3V. The NJU3610 is ideal for various consumer audio devices such as digital TVs, soundbars, and speaker systems.

• Other semiconductors

Low voltage operation video amplifier with built-in LPF.

Overview: The NJM2561A is a low-voltage video amplifier with a built-in low-pass filter (LPF). It operates at a supply voltage of 2.6 to 5.5V, allowing for low-voltage operation, and features a built-in 75Ω driver circuit, enabling direct connection to video equipment such as TV monitors. The input supports composite video signals and includes a mute circuit that also serves power-saving functions, making it suitable for low power consumption designs. Additionally, its compact package (ESON6) makes it ideal for portable devices such as DSCs, DVCs, and surveillance cameras.

• Other semiconductors

Analog input filterless monaural 1.5W output Class D power amplifier

Low voltage operation, filterless output, and 1.5W output make it ideal for battery-powered device speaker amplifiers. 【Overview】 The NJU8758 is a filterless Class D power amplifier that operates over a wide range from 1.8V to 5.5V. The output is in a BTL configuration, eliminating the need for coupling capacitors and providing an output of 1.5W. Additionally, since an output LC filter is not required, the number of external components can be reduced. The output terminals are equipped with a built-in short-circuit protection circuit that protects the IC during short circuits between the output terminals and between the output terminals and ground. With its Class D operation, it offers high power efficiency, making it ideal for small consumer devices such as security equipment, portable devices, portable audio equipment, and laptops.

• Other semiconductors

Replace with silicone! Maintains high-speed switching even at high temperatures, reducing power loss!

The "SiC-SBD series" is a Schottky barrier diode made from SiC (silicon carbide) material. It supports low resistance and high-speed switching, which can reduce switching losses. Additionally, it can operate stably at high temperatures, enabling the miniaturization of power devices. It is effective in high-speed switching applications such as PFC circuits, motor drive circuits, and inverter circuits. 【Features】 ■ Reduction of switching losses due to high-speed switching characteristics ■ Improvement of power conversion efficiency and capability for high frequency ■ Reduction of leakage current at high temperatures ■ Prevention of thermal runaway due to increased current *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

We provide high value-added programmable solutions to over 13,000 customers worldwide.

Altera's FPGAs continue to lead innovation in programmable logic. They are programmable solutions with high added value, integrating FPGA, CPLD, and HardCopy ASIC with development software, IP (Intellectual Property), and customer support. 【Product Lineup】 FPGA CPLD

• Other semiconductors
• Signal Generator
• Image Processing Equipment

We can provide a wide range of proposals tailored to your needs.

【Product Lineup】 Operational Amplifiers Video Amplifiers Audio Amplifiers Comparators A/D Converters D/A Converters Analog Switches Digital Potentiometers Linear Regulators Switching Regulators DC/DC Converters Reset ICs Battery Chargers References ICs for Crystal Oscillators Silicon Oscillators RS232, RS485, RS422 Interfaces LED Drivers LCD Drivers Motor Drivers Wireless Modules (Bluetooth, Wireless LAN, GPS)

• Other semiconductors
• Weight related measuring instruments
• Analytical Equipment and Devices

Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation on the following dates. ■ Summer Vacation Period From Wednesday, August 13, 2025, to Sunday, August 17, 2025. We will resume normal business hours on Monday, August 18, at 8:30 AM. We apologize for any inconvenience this may cause and appreciate your understanding.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On August 12, 2025 (Tuesday), they published the "Top 10 Accesses from April to June: A Quick Read for Obon" page. This page introduces blog articles that you want to read quickly during Obon, featuring the top 10 accessed articles from April to June 2025. (Page Overview: Excerpts) ■ 10th: "Filter Bubble" ■ 09th: Should 'Phone Numbers' Be Public on Websites!? ■ 08th: "In-group Bias" ■ 07th: "Peter Pan Syndrome" ■ 06th: "Butterfly Effect" ■ 05th: Useful for Business! Downloadable Content ■ 04th: "Reaction Formation" ■ 03rd: Is "Quality over Quantity" Important? Or is "Quantity over Quality" Important? ■ 02nd: "The Emperor's New Clothes" Phenomenon ■ 01st: "Janet's Law" ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/top-10-accesses-in-2025-2q-2025-08/

The Japanese rebar market size in 2024 is estimated to be USD 9.07 billion. Going forward, the IMARC Group expects the market size to reach USD 14.8 billion by 2033, with a compound annual growth rate (CAGR) of 5.10% from 2025 to 2033. The Japanese rebar market is driven by stable construction demand, infrastructure projects, and urbanization, with domestic manufacturer Nippon Steel leading the supply. Prices are influenced by raw material costs, import competition, and government infrastructure spending. This report analyzes key trends in each market segment and provides country-specific forecasts for the period from 2025 to 2033. The report is segmented based on product type, manufacturing process, finishing type, and end-use. This report offers a detailed analysis of the competitive environment, highlighting market structure, key companies' positions, strategies, competitive dashboards, and company evaluation quadrants. Email: sales@imarcgroup.com

In 2024, the Japanese ophthalmic laser market size reached USD 91.6 million. The IMARC Group forecasts that by 2033, the market size will reach USD 160.9 million, growing at a compound annual growth rate (CAGR) of 5.8% from 2025 to 2033. The Japanese ophthalmic laser market is steadily growing against the backdrop of increasing prevalence of eye diseases and advancements in laser technology. The expansion of minimally invasive surgeries and government support for medical innovations are further driving the market growth. This report analyzes key trends in each market segment and provides country-specific forecasts for the period from 2025 to 2033. The report is segmented based on products, indications, and end-users. The report offers a detailed analysis of the competitive environment, highlighting market structure, key players' positions, strategies, competitive dashboards, and company evaluation quadrants. Email: sales@imarcgroup.com

In 2024, the market size of polyimide films in Japan reached USD 137.5 million. The IMARC Group forecasts that by 2033, the market size will reach USD 209.4 million, growing at a compound annual growth rate (CAGR) of 4.30% from 2025 to 2033. The Japanese polyimide film market is supported by high demand in the electronics, automotive, and aerospace industries, attributed to the excellent thermal and chemical resistance of polyimide films. Technological innovations and the expanding adoption of flexible electronics are further driving market growth. This report analyzes key trends in each market segment and provides country-specific forecasts for the period from 2025 to 2033. The report is segmented based on application, sales channel, and end-use. It offers a detailed analysis of the competitive environment, highlighting market structure, key players' positions, strategies, competitive dashboards, and corporate evaluation quadrants. Email: sales@imarcgroup.com