Notice of Product Catalog Listing for Wind Power Generation Related Products

Achieving improved performance of the turning system, increased reliability, and reduced system costs!

Using an electric motor equipped with the "Agile Inverter" results in a significantly more space-saving solution compared to conventional inverters with separate electric motors for turning. Additionally, using a turning device equipped with the "Agile Inverter" improves the performance of the turning system, increases reliability, and reduces system costs. 【Features】 ■ Space-saving ■ Improved performance of the turning system ■ Reduced system costs ■ Power: 1.1 kW to 11 kW ■ Built-in EMC filter for simplified EMC compliance *For more details, please refer to the PDF document or feel free to contact us.

• Inverter
• others

Application of wind power generation's rotary drive device! Compact sensorless inverter.

"Agile" is a compact sensorless inverter. It is used in applications such as the turning drive systems of wind power generation, which require simple startup, space-saving, and downtime prevention. 【Features】 ■ Compact ■ Control dedicated to open-loop drive ■ Asynchronous AC induction motor ■ Capable of driving synchronous AC permanent magnet motor groups without feedback ■ Integrated safety design *For more details, please refer to the PDF document or feel free to contact us.

• Inverter
• others

Adjustable brake torque! Inverter specification AC motor compliant with IEC standards.

The "BE Series" complies with all international standards, including EMC and LV directives, and meets IEC 60034-30:2008 (efficiency class) for AC motors. Output is available in the range of 0.75 - 22kW, with mounting options available in foot and flange types. The flange type is available in IM B5 and IM B14 configurations. A single shaft version is possible, and there are two brake options for one type of DC motor and one type of AC motor. 【Features】 ■ Compliant with IEC ■ Inverter specification ■ Output range of 0.75-22kW ■ Protection class IP54-IP55 ■ Adjustable brake torque *For more details, please refer to the PDF document or feel free to contact us.

• DC Motor
• AC Motor
• Inverter

Adjustable brake torque! Inverter specification electric motor compliant with IEC standards.

The "BN Series" is an electric motor for gear reducers that complies with IEC standards. There are two mounting methods: foot-mounted and flange-mounted, with the flange-mounted option available in "IM B5" and "IM B14" configurations. Single and dual polarity versions are available, and there are three types of brake options for one type of DC motor and two types of AC motors. 【Features】 ■ Mounting methods: foot-mounted and flange-mounted ■ Inverter specifications ■ DC and AC power ■ Adjustable brake torque ■ Output range: 0.25 kW to 30 kW *For more details, please refer to the PDF document or feel free to contact us.

• DC Motor
• AC Motor
• Inverter

High torque capacity and a wide reduction ratio for high efficiency! Used by many wind power manufacturers.

The "700T Series" is a planetary gearbox used for pitch and yaw control in wind power generation systems. To increase the transmitted torque, each stage has 3 to 4 planetary gears, and to achieve high efficiency, the planetary gears are supported by roller bearings or roller track bearings. It is used by many major wind power manufacturers and demonstrates its performance. 【Features】 ■ Flange mounting ■ Output shaft with spline or pinion gear ■ Reinforced structure ■ High torque capacity ■ Output shaft supported by heavy-duty bearings *For more details, please refer to the PDF materials or feel free to contact us.

• Gearbox
• others

Suitable for wind power generation of 1.5MW to 3.5MW! A compact and lightweight gearbox specialized for rotary drive.

The "7TW Series" is a multi-layer reduction gear specialized for swivel drive. It further miniaturizes the existing yaw drive, and the new system for nacelle directional control is equipped with a brake for the inverter-controlled motor. This new design can be easily integrated into applications and simplifies maintenance. 【Features】 ■ Suitable for wind power generation from 1.5MW to 3.5MW ■ Miniaturization ■ Lightweight ■ Fewer components ■ Easy installation *For more details, please refer to the PDF document or feel free to contact us.

• Gearbox
• Inverter

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

From turning processing to milling processing—responding to process integration with composite machining centers C&G Systems Co., Ltd. has released the lathe module "TURNING," which realizes the "true process integration" required in the era of composite machining centers. By covering 2D and 3D milling, wire electrical discharge machining, and turning processing, "EXCESS-HYBRID II / Parts CAM" has evolved into an ALL-IN-ONE CAM system that transcends the boundaries of processing fields. The lathe module "TURNING" was developed against the backdrop of voices from the field, where the advancement of high functionality and integration of NC machine tools has led to continued reliance on interactive input and manual programming, resulting in increased man-hours, occurrence of errors, and a shortage of skilled technicians. While composite machining centers have the significant advantage of completing both turning and milling in one machine, the diversification and complexity of processed shapes have made programming advanced and intricate, necessitating measures against interference risks and efficient process design. "TURNING" achieves a reduction in programming time and stable quality reproduction, maximizing the performance of composite machining centers.