Spectrum Instrumentation GmbH has released the next-generation 16-bit mid-range digitizer series "M2p.59xx" and the 16-bit mid-range digitizer NETBOX.

A new generation mid-range digitizer with German quality, featuring a card size reduced to half and significantly improved dynamic characteristics.

Spectrum M2p.59xx-x4 - 16 bit general purpose Digitizer series PCIe, 16bit, sample rate 5 ~ 125MS/s, 1 ~ 8 channels, true differential 1 ~ 4 channels, high-resolution digitizer from Spectrum, Germany 1/2 size long Input impedance: 50Ω, 1MΩ Resolution: 16 bit PCIe x4 Gen 1 Interface (maximum data transfer speed 700MB/s) Standard memory 1 GByte Input voltage level: DC, ±200 mV ~ ±10 V Can operate synchronously with up to 16 cards (using PCIe expansion box) via Star-Hub SCAPP support Warranty period 5 years

• Other electronic measuring instruments

We have achieved a 50% increase in speed and a significant improvement in dynamic characteristics compared to conventional products. It can be easily connected to a computer via LAN.

LXI (GBit Ethernet Interface), 16bit, sample rate 5 ~ 125MS/s, 4, 8, 16 channels, true differential 4, 8 channels, high-resolution digitizer from Germany's Spectrum company Input impedance: 50Ω, 1MΩ Resolution: 16 bit LXI (GBit Ethernet Interface, maximum data transfer speed 70MB/s) Standard memory: 1 GByte Input voltage level: DC, ±200 mV ~ ±10 V Reliable 5-year warranty

• Other electronic measuring instruments

10 Reasons to Choose Spectrum's Digitizers, AWGs (Arbitrary Waveform Generators), and Digital IO from Germany

1. Spectrum is a world-leading manufacturer of high-speed, high-resolution digitizers, AWGs (arbitrary waveform generators), and digital I/O. 2. We offer a wide range of over 500 products. 3. You can choose the perfect product for your intended use from our extensive product lineup based on modular design. 4. We have guaranteed software compatibility for the past 15 years, allowing our customers to develop new products in a short period of time in the future. 5. We will continue to develop new products in a short timeframe. 6. With the included user-friendly and high-performance SBench6 software, you can perform operation checks and verification without the need to create programs. 7. While Electronica IMT provides product support, you can also receive direct support from Spectrum's hardware and software engineers. 8. Since our establishment in 1989, we have been producing German quality products with all development, manufacturing, and inspection conducted in Germany. 9. Our products come with an industry-leading 5-year warranty, delivering peace of mind along with the product. 10. Our customers around the world are satisfied. We hope you will become one of them as well.

• Other electronic measuring instruments

Is that measurement, inspection, and oscilloscope okay? A clear explanation of basic knowledge such as basic performance, signal processing methods, and connection interfaces.

Our company, which specializes in the sale of high-speed digitizers and arbitrary waveform generators, is currently offering a "reference material" related to digitizers. In addition to "basic performance" such as input range and conversion bit count, we provide explanations with images on fundamental knowledge such as "averager," which is widely used for signal integration processing, and "PCI Express standards." The material is designed to be easy to understand for beginners. 【Contents (excerpt)】 ■ What is a digitizer? ■ Basic performance of digitizers ■ What is the difference between a digitizer and an oscilloscope? ■ What is PCIe? ■ What is LXI? ■ What is an averager? ■ Ultra-fast parallel processing of large data ■ SCAPP *For more details, you can view it immediately from the [Download] section.

• oscilloscope

An SDK option for performing computational processing of data acquired by a digitizer at supercomputer-level speeds using Nvidia's CUDA.

Spectrum Instrumentation GmbH in Germany released a new SDK, the SCAPP software option – the Spectrum CUDA Access for Parallel Processing – on November 20, 2017. SCAPP is an SDK option that uses Nvidia's CUDA standard (CUDA is a parallel computing architecture that utilizes GPUs with 256 to 5,000 processing units provided by NVIDIA) to perform computational processing of data acquired by digitizers at supercomputer-like speeds. With CUDA, it is possible to execute data conversion, filtering, accumulation and averaging, baseline correction, window processing, and FFT at supercomputer-like speeds (up to 12 TFLOPS). The SCAPP package is an extension of drivers that enable Remote Direct Memory Access (RDMA), and it supports the M4i series and M2p series under Linux.

• Other electronic measuring instruments

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK