We will be exhibiting as a sponsor at the VINAS Users Conference 2018 (Thursday, October 11).

Material simulation using first-principles calculations 'matelier PHASE/0'. For predicting physical properties of new materials, interpreting experimental results, and solving problems.

You can utilize it for the simulation of new materials (physical property value prediction). The first-principles band calculation software "PHASE/0" determines the electronic states of materials according to quantum mechanics, allowing for precise analysis. No parameters based on experimental results are required for the calculations. It can also be used for interpreting experimental results and predicting the physical property values of new materials. 【Main Analysis Targets】 Semiconductors (Group IV, Group III-V, nitrides, oxides, silicides; Si, SiC, GaN, Ga2O3, ZnO, etc.) / Dielectrics (high-k, low-k, ferroelectrics, piezoelectrics) / Magnetic materials (ferromagnetic materials, half-metals) / Organic compounds (molecular crystals) / Metals (alloys) / Minerals / Ceramics / Nanocarbon (graphene, nanotubes) / Amorphous materials (such as semiconductor oxide films) / Transition metal chalcogenides, etc. 【Main Applicable Industries】 Universities, public research institutions / Semiconductors, electronic materials / Electronics / Chemicals / Steel / Others (textiles, non-ferrous metals, rubber and tires), etc. Asmus Co., Ltd. offers software implementation and consulting services for "PHASE/0."

• simulator
• Other analyses

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Dear Sir/Madam, I would like to express my congratulations on the continued prosperity of your company. Thank you very much for your exceptional support. We would like to inform you that our company will be closed for winter holidays during the following period. We apologize for any inconvenience this may cause and kindly ask for your understanding. 1. Winter Holiday Period From Thursday, December 28, 2023, to Thursday, January 4, 2024. 2. Business Operations After the Winter Holiday Period We will resume normal operations from Friday, January 5, 2024.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.